Starter ring gear

From Wikipedia, the free encyclopedia

Notepad
 To comply with Wikipedia's quality standards, this article may need to be rewritten.
Please help improve this article. The discussion page may contain suggestions.

A starter ring gear, sometimes called a starter ring or ring gear, is a steel ring with teeth that is fitted on the periphery of a flexplate or flywheel of an internal combustion engine, mostly for automotive applications.

The teeth of the starter ring are driven by the smaller gear (the pinion) of the starter motor. The primary function of the starter ring is to transfer torque from the starter motor pinion to the flywheel or flexplate to rotate the engine to begin the cycle.

The starter ring gear is most commonly made by forming a length of steel into a circle and welding the ends together. There then follow various heat-treatment and machining operations, including the machining of the teeth and finally a heat-treatment operation. The teeth of the starter ring need to be hardened in order to increase their strength and resist wear. The body of the ring is generally left untreated.

Engines with manual transmission usually have a heavy flywheel, typically 5 to 10 kg of cast iron, with the starter ring gear shrunk onto the outside. This is done by heating the ring to around 200 °C to expand the ring which is then placed onto the flywheel and allowed to cool. The starter ring is thereby firmly attached to the flywheel.

Engines with automatic transmissions instead have a pressed steel plate with the starter ring gear usually welded onto the outside of the plate.