Sprinkler system timer

From Wikipedia, the free encyclopedia

A sprinkler system timer is an electrical device that is used to set an irrigation sprinkler system to come on automatically at a certain time. Irrigation timers first appeared in the early 1960s to control large-radius lawn sprinklers, which at the time usually contained their own electrically-operated valve (most golf-course sprinklers still use this type of actuation). These timers were large and cumbersome with numerous mechanical parts and were usually relegated to agricultural and commercial applications. Compact irrigation timers did not become commonplace until the 1970s when Lawn Genie introduced a mechanical timer which measured only ten by six inches and was four inches deep. This controller proved popular for many years, but was hard to reprogram and it did not operate valves in immediate succession unless each valve was set to run for an hour. This problem was solved when Rain Bird introduced their "Rain Clock" series in the late 1970s, which featured a new "at a glance" electromechanical programming interface which proved very easy to operate, and offered the ability to omit stations from the program sequence without creating time gaps. These ranged from 24-station commercial units to 4-station small residential units. The timer which became standard issue in many tract homes during the 1980s was the RC-7A, which was part of this series. It operated seven valves and proved to be remarkably durable in its construction.

Irrigation control systems almost always use 24-volt alternating current transmitted over two wires, one of which is "common" and connected to all the valves. Other, less-common systems involve fluid-filled hydraulic tubes to open or close the valves.

Many companies followed with similar designs, such as Rainmaster, Griswold Controls, Toro, and Irritrol.

In the late 1980s, the irrigation company Hydro-Rain introduced the first "hybrid" controller design, called the HR-6100, which combined electronic programming with a visual programming interface involving a single selector dial. This overtook the electromechanical timers as the most common design, and today nearly all timers sold are hybrid designs.

The 1990s saw the introduction of computer-controlled "central control" systems, pioneered by Rain Bird for use on golf courses. This system was called "MaxiCom" and worked through a set of "cluster control units", each of which in turn synchronized a number of "satellite" controllers.