Spray dryer
From Wikipedia, the free encyclopedia
 |
It has been suggested that this article or section be merged into Spray drying. (Discuss) |
A spray dryer is a device used in spray drying. It takes a liquid stream and separates the solute or suspension as a solid and the solvent into a vapor. The solid is usually collected in a drum or cyclone. The liquid input stream is sprayed through a nozzle into a hot vapor stream and vaporised. Solids form as moisture quickly leaves the droplets. A nozzle is usually used to make the droplets as small as possible, maximising heat transfer and the rate of water vaporisation. Droplet sizes can range from 20 μm to 180 μm depending on the nozzle.
Spray dryers can dry a product very quickly compared to other methods of drying. They also turn a solution, or slurry into a dried powder in a single step, which can be advantageous for profit maximization and process simplification.
[edit] References
- McCabe, Smith, Harriett Unit Operations of Chemical Engineering, 2005
 |
This chemistry article is a stub. You can help Wikipedia by expanding it. |
