Sound Blaster X-Fi
From Wikipedia, the free encyclopedia
 |
The introduction of this article is too short. To comply with Wikipedia's lead section guidelines, it should be expanded to summarize the article. |
Sound Blaster X-Fi is a PCI or PCI-E sound card from Creative Technology. It is an add-on board for PCs.
Contents |
[edit] Overview
The X-Fi (for "Extreme Fidelity") was released in August 2005 by and initially ranging from XtremeMusic (lowest-end), to Platinum, Fatal1ty FPS, and (top-of-the-range) Elite Pro configurations.[1] The top-end Elite Pro model was aimed at musicians, bundled with the X-Fi external I/O box (offering phono with preamp inputs for turntables, high-impedance input for guitars, 0.25-inch mic input, headphone output, line-in, and full size MIDI I/O, as well as optical and RCA Coaxial digital inputs and outputs), and remote control. The Platinum and Fatal1ty FPS models both offer a front-panel drive-bay control unit and remote control, while the base model was supplied without any such accessories. All but the top model claimed 109dB signal-to-noise ratio, while the Elite Pro model uses a higher-end DAC, with 116dB claimed. The bottom two models feature 2MB RAM of 'X-RAM', while the top models offer 64MB,[2] designed for use in games to store sound samples for improved gaming performance.
October 2006 saw a minor rebranding: the X-Fi XtremeMusic edition, which was in fact a highly capable gaming card, as it offers hardware decoding and EAX support, was replaced with the XtremeGamer model. The revised model featured half-width PCB, non-gold-plated connectors, and lacked the connector for users wishing to purchase a separate X-Fi I/O box. Functionality is otherwise the same.
The market segment occupied by the XtremeMusic was moved downwards, with the introduction of the (cheaper) 'Xtreme Audio' and 'Xtreme Audio Notebook' products, which, despite the "X-Fi" label, are the only products in the X-Fi line not using the EMU20K1 chip (CA20K1)[3] (CA0106-WBTLF)[4] and thus lacking the hardware acceleration of 3D sound and EAX sound effects, gaming and content creation features and the I/O extensibility of all the other X-Fi models. Despite the name, the Xtreme Gamer card offers a better signal-to-noise ratio and lower total harmonic distortion than the Xtreme Audio, and is hence a better card even purely for music use, though the marketing of the two products suggests that Creative believes the cheaper product to be adequate for most users.
The other new product introduced was the X-Fi 'XtremeGamer Fatal1ty Pro', identical in function to the Fatal1ty FPS, but made more affordable by the unbundling of the I/O panel and remote control.
Creative also released an external solution (named x-mod) in November 2006 which is listed in the same category as the rest of the X-Fi lineup, but is only a stereo device, marketed to improve music playing from laptop computers, and with lower specifications of the internal offerings.
The 130 nm EMU20K1 audio chip operates at 400 MHz and has 51 million transistors. The computational power of this processor, i.e. its performance, is estimated as 10,000 MIPS (million instructions per second), which is actually about 24 times higher than the estimated performance of its predecessor—the Audigy processor. It is interesting to note that the processor’s computational power is optimized for the work mode selected in the software. With the X-Fi's "Active Modal Architecture" (AMA), the user can choose one of three optimization modes (Gaming, Entertainment, and Creation), each of which enables a different combination of the features of the chipset. The Xtreme Audio model lacks the EMU20K1 chip and thus only supports the "Entertainment" mode via software emulation, while all other models support all three modes. X-Fi models that support "Gaming" mode use EAX 5.0, which supports up to 128 3D-positioned voices with up to four effects applied to each. The X-Fi, at its release, offered some of the most powerful mixing capabilities available, and made it a powerful entry-level card for home musicians.
The audio processor on X-Fi was by far the most powerful at its time of release, offering an extremely robust sample rate conversion (SRC) engine in addition to enhanced internal sound channel routing options and greater 3D audio enhancement capabilities. A significant portion of the audio processing unit was devoted to this resampling engine. The SRC engine was far more capable than previous Creative sound card offerings, a limitation that had been a major thorn in Creative's side. Most digital audio is sampled at 44.1 kHz, a standard no doubt related to CD Digital Audio, while sound cards were often designed to process audio at 48 kHz. So, the 44.1 kHz audio must be resampled to 48 kHz (Creative's previous cards' DSPs operated at 48 kHz) for the audio DSP to be able to process and affect it. A poor resampling implementation introduces artifacts into the audio which can be heard, and measured as higher intermodulation distortion, within higher frequencies (generally 16 kHz and up). X-Fi's resampling engine produces a near-lossless-quality result, far exceeding any known audio card DSP available at the time of release. This functionality is used not only for simple audio playback, but for several other features of the card such as the "Crystalizer", a technology that claims to improve the clarity of digital music through digital analysis (supported by all X-Fi models, including the Xtreme Audio and X-Mod).
The 20K1 chip can use a significant amount of RAM to store sound effects for faster and improved processing, just like the previous E-mu 10K-series and E-mu 8000. This feature, dubbed X-RAM by Creative and found on the higher-end models in the X-Fi line (the Elite Pro, Fatal1ty and XtremeGamer Fatal1ty Pro Series), is claimed to offer quality improvement through audio processing capability enhancement, in addition to further reduction in host system CPU overhead.
In 2007 Consumer Electronics Show, Creative Technology unveiled PCI Express x1 and ExpressCard/54 versions of Sound Blaster X-Fi Xtreme Audio.[5]
[edit] X-Fi features
The Sound Blaster X-Fi presents the following features, which are usually implemented with the aid of the X-Fi DSP or in software, in the Xtreme Audio model.
- 24-bit Crystalizer
Creative Labs states that primary function of the 24-bit Crystalizer is to "restore portions of the sound which were lost during compression"[citation needed]. In theory this can be done by advanced interpolation techniques. In practice, the Crystalizer is a dedicated, dynamic equalizer (Exciter). Its main function is to enhance the high and low frequencies of the input audio. Other functions include modifying a certain range of frequencies in order to achieve better perceived sound quality on a wider array of equipment such as headphones and speakers, and also to digitally increase the volume by about 3db. The Crystalizer emphasis can be adjusted between 0-100% when enabled, however even at 0% the audio is still processed partially. As a consequence of enabling the Crystalizer, the original signal is altered, and whether the result improves upon the original audio is purely a matter of perception and can depend on the type of audio being played.
- CMSS-3D
This feature is intended for both headphones and speakers. CMSS-3D consists of 3 settings depending upon what equipment is used. With 2 speakers, CMSS-3DVirtual can be enabled for virtual 3D audio. If surround sound speakers are used, CMSS-3DSurround can upmix stereo sources up to 7:1 channels. There is also CMSS-3DHeadphone for virtual 3D audio when using headphones. Whether the results are desirable can depend upon speaker equipment and personal preference.
- EAX Effects
Environmental Audio Extensions is designed to be enabled by game developers within a game to enhance the "simulated-reality" the user is modifying. There are also 8 built-in EAX effects which can be enabled by the user.
- SVM
This is Smart Volume Management. It is a compressor or normalizer that tries to keep the volumes of various audio sources equal. It does alter the original recording so it may or may not be a desired option. It can be useful depending upon what audio is being played, or if two audio sources are being played at once.
- Graphic Equalizer
This function divides music into ten frequency bands, which can be adjusted using the sliders.
- The Mixer
There are multiple volume adjustments for different inputs and outputs on the system. The master volume affects all of these settings. The default and recommended value is 50% for all sources, which actually equates to a 0 dB amplification (none), while a 100% value causes a 6 dB amplification.
- Dolby Digital Bitstream Out
This setting controls the DD sound decoder.
- DTS Bitstream Out
This setting is the same as Dolby Digital Bitstream Out, only with DTS sound instead.
- Linux support
On September 24, 2007 Creative Labs released a closed source unsupported beta driver providing Linux 64-bit OS support for the following Sound Blaster X-Fi series sound cards:[6]
- Creative Sound Blaster X-Fi Elite Pro
- Creative Sound Blaster X-Fi Platinum
- Creative Sound Blaster X-Fi Fatal1ty
- Creative Sound Blaster X-Fi XtremeGamer
- Creative Sound Blaster X-Fi XtremeMusic
An open source driver is available with OSS v4 build 1013 and above[7]. As of May 2008, ALSA does not support the X-Fi series. However, datasheets were provided to the ALSA team and drivers are now in development.[8]
[edit] Criticism
[edit] Crystalizer
Creative Labs has received criticism for the way the X-Fi-series was marketed.[9] This criticism mostly centered on the optional "Crystalizer" functionality—a DSP function which colors the output audio in an effort to improve perceived quality. Creative claims that this Crystalizer DSP could derive 24-bit resolution from audio recorded originally at 16-bit, which is misleading. The resolution of a recording mathematically limits its precision; however, 24-bit output resolution may allow for a more accurate representation of 16-bit input after processing has been performed.
In fact, Crystalizer is similar to the countless plugins that are available for digital audio players. Since the technology is proprietary, Creative has not released a great deal of information into the technical workings; only to describe it as a "signal-dependent, dynamic EQ", where as other testing has determined it's closer to a multi-band compressor. Whether or not the effect is beneficial is a qualitative measurement unique to each individual, and depends on the type of audio being played back.[10]
[edit] Operating System support
As of June 2007, Creative does not yet officially support the use of Sound Blaster X-Fi with Microsoft Windows 2000. An X-Fi card's audio drivers (EMU20K1 chipset) may indeed install perfectly under Windows 2000 but the Creative Audio Console and other related software will likely refuse to recognize the device, thereby leaving the sound card in a default two-speaker mode. Fortunately a workaround exists, which enables full Creative software support under Windows 2000. The currently-working solution is to replace all instances of the file "ctxfispi.exe" in newer driver versions (e.g., SBXF_PCDRV_LB_2_09_0007.exe) with the same file from older drivers (e.g., SBXF_PCDRV_LB_2_07_0004.exe), as seen in Creative's own user forums.[11] Please note that Windows 2000 audio management tools cannot be used to significantly tweak an X-Fi card, especially (and critically) with respect to speaker management. Also, the X-fi series sound cards were not fully compatible with Windows Vista 64 bit with systems using 4 gigabytes of RAM but this was fixed with a driver update.
Drivers for Linux have been available for the X-Fi series since September 2007. However, the drivers remain in beta, closed source, and only available for the X86 64 architecture rendering them unusable for the majority of users. There are open sourced drivers for the X-FI from [4front OSS], available for all major unices.
[edit] X-Fi Xtreme Audio
The entry-level model of the X-Fi series, the Sound Blaster X-Fi Xtreme Audio, does not actually have the EMU20K1 chip but is a re-branded Audigy SE, using the same family of chips (CA0106-WBTLF), and even the same drivers.[12] Thus, not only is all of the X-Fi–related processing performed in software, but it also lacks basic hardware acceleration just like the SB Live! 24-bit, the Audigy SE and other budget Soundblaster models. The X-Fi Xtreme Audio does not use the same drivers as the rest of the X-Fi family, some games do not recognize it as being "X-Fi capable hardware", and the device's hardware profile resembles that of older Live! and Audigy cards.
Furthermore, users have reported that it slows down some applications and games, and that rear sound in games (all) is muffled and of profoundly low quality.[13][14][15] Thus, even if the card is marketed as part of the X-Fi line, it does not belong to it technically, just like the Audigy SE doesn't technically belong to the Sound Blaster Audigy series. The card is not marketed as supporting the "X-Fi Gaming Mode" (but is still marketed as "X-Fi"), and there are no official implicit or explicit statements regarding its having hardware acceleration or not.
[edit] X-Fi Xtreme Audio (PCI Express version)
On top of the Xtreme Audio's rear sound problem in games, the PCI Express version of the X-Fi Xtreme Audio suffers from the inability to record from a Microphone while simultaneously recording "What U Hear", which is possible in all other cards. The reason for this is unknown, but the issue is that the Windows audio Playback Control panel doesn't allow you to view the Mic channel when looking at your Playback Control sliders (activated by double-clicking the Windows Volume Control button). In the Windows audio Playback Control panel, the Mic can only be viewed in Recording Control, and there is no Mute/Unmute checkbox associated with it. The Creative Mixer shares the problem in a different way: you can unmute the Mic, but it becomes muted again once you switch to "What U Hear" as your recording source. Thus, on the PCI Express version of the Xtreme Audio (only) it is impossible to record your Mic and "What U Hear" at the same time, because you cannot get the Mic to output to the speakers while "What U Hear" is enabled.
[edit] Sound Issues with Crackling and Popping
A number of owners of X-Fi cards have come to experience what is known as a constant popping and crackling noise during use of the cards. Creative has attributed the case to be NForce motherboards, however many other users who do not use these motherboards continue to experience the sound issues. Creative has not provided a fix as of yet for this. [16]
[edit] X-Fi line-up
| Card | Release | signal to noise ratio | Chip | RAM | I/O Console | I/O Drive Box | Remote control | Notes |
|---|---|---|---|---|---|---|---|---|
| Prelude | Aug'07 | 120db | EMU20K1 | 64MB | - | High-end X-Fi product designed and marketed by Auzentech with Creative Labs' collaboration | ||
| Elite Pro | Aug'05 | 116db | EMU20K1 | 64MB | included | - | included | additional software included |
| Titanium Fatal1ty Champion | Jun'08 | 109db | ? | 64MB | optional | included | optional | |
| Titanium Fatal1ty Pro | Jun'08 | 109db | ? | 64MB | optional | - | optional | |
| Fatal1ty | Aug'05 | 109db | EMU20K1 | 64MB | optional | included | included | also known as: Fatal1ty FPS / Fatal1ty Edition / Platinum Fatal1ty Champion |
| XtremeGamer Fatal1ty Pro | Oct'06 | 109db | EMU20K1 | 64MB | optional | optional | ||
| Platinum (Discontinued) | Aug'05 | 109db | EMU20K1 | 2MB | optional | included | included | |
| XtremeMusic (Discontinued) | Aug'05 | 109db | EMU20K1 | 2MB | optional | optional | still widely available as OEM product | |
| Digital Audio (Discontinued) | Sep'05 | 109db | EMU20K1 | 2MB | optional | optional | Japan-only variant of XtremeMusic with additional jack extension | |
| XtremeGamer | Oct'06 | 109db | EMU20K1 | 2MB | - | optional | Low profile card (half height), replacement for XtremeMusic | |
| Xtreme Audio | Oct'06 | <109db | CA0106 | - | - | optional | Low profile card (half height), does not contain the EMU20K1 chipset used by the rest of the series. Is based on the same chipset as the Audigy 2 SE and SB Live! 24-bit. It also has Crystalizer and CMSS-3D. Also available for PCI Express and ExpressCard. |
- The I/O Console is an external box with analog and digital I/O audio jacks and volume control knobs. It is always bundled with the remote control
- The I/O Drive Box is an internal 5 1/4 drive with analog and digital I/O audio jacks and volume control knobs. Also bundled with the remote control.
- All cards have 3x 1/8 inch jacks for analog headphone/speaker output (2 of them are 4-segment-jacks for a total of 7.1 sound output)
- All cards have 1x shared 1/8 inch jack for either: Line In / Microphone / Digital Out / Digital I/O Module. The optional Digital I/O Module is an external box for handling digital IO: 1x Coax In, 1x Coax Out, 1x Optical In, 1x Optical Out
[edit] See also
[edit] References
- ^ Creative X-Fi Xtreme Music and X-Fi Elite Pro - TrustedReviews
- ^ Creative Labs Sound Blaster X-Fi - admin - Maximum PC
- ^ http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=94005 but an older chip similar to the Audigy SE and SB Live! cards
- ^ Jimmy’s Junkyard » Blog Archive » X-Fi Xtreme Audio = Audigy SE ???
- ^ Creative X-Fi PCI Express Soundcard - VR-Zone IT & Lifestyle Forum!
- ^ Sound Blaster - Purest Audio, Richest Sound
- ^ Open-Source Creative X-Fi Support
- ^ Matrix:Vendor-Creative Labs - AlsaProject
- ^ Liadov, Maxim (August 22, 2005). Creative SoundBlaster X-Fi — A New Generation of Xtreme Fidelity Processors and Sound Cards. digit-life.com. Retrieved on 2008-01-24.
- ^ Liadov, Maxim (October 17, 2005). Creative SoundBlaster X-Fi — Part 2. 24-bit Crystalizer. digit-life.com. Retrieved on 2008-01-24. October 17, 2005
- ^ Can You Help Me Get the Beta Driver to Work with Windows 2000? - Sound Blaster - Creative Labs
- ^ Matrix:Vendor-Creative Labs - AlsaProject
- ^ Newegg.com - Creative Sound Blaster X-Fi Xtreme Audio 7.1 Channels 24-bit 96KHz PCI Interface Sound Card - Retail
- ^ For anyone considering the new X-Fi Xtreme Audio - Guru3D.com Forums
- ^ Xtreme Audio: chip mystery solved [kinda]. - Sound Blaster - Creative Labs
- ^ Follow-up: Crackle/Pop issues - Sound Blaster - Creative Labs
[edit] External links
- Creative Sound Blaster X-Fi - Creative's official Marketing and Technology page for the Sound Blaster X-Fi series
|
|||||
