Solid-state nuclear magnetic resonance
From Wikipedia, the free encyclopedia
Solid-state NMR (SSNMR) spectroscopy is a kind of nuclear magnetic resonance (NMR) spectroscopy, characterized by the presence of anisotropic (directionally dependent) interactions.
Contents |
[edit] Introduction
Basic concepts A spin interacts with a magnetic or an electric field. Spatial proximity and/or a chemical bond between two atoms can give rise to interactions between nuclei. In general, these interactions are orientation dependent. In media with no or little mobility (e.g. crystals, powders, large membrane vesicles, molecular aggregates), anisotropic interactions have a substantial influence on the behaviour of a system of nuclear spins. In contrast, in a classical solution-state NMR experiment, Brownian motion leads to an averaging of anisotropic interactions. In such cases, these interactions can be neglected on the time-scale of the NMR experiment.
Examples of anisotropic nuclear interactions Two directionally dependent interactions commonly found in solid-state NMR are the chemical shift anisotropy (CSA) and the internuclear dipolar coupling. Many more such interactions exist, such as the anisotropic J-coupling in NMR, or in related fields, such as the g-tensor in electron spin resonance. In mathematical terms, all these interactions can be described using the same formalism.
Experimental background Anisotropic interactions modify the nuclear spin energy levels (and hence the resonance frequency) of all sites in a molecule, and often contribute to a line-broadening effect in NMR spectra. However, there is a range of situations when their presence can either not be avoided, or is even particularly desired, as they encode structural parameters, such as orientation information, on the molecule of interest.
High-resolution conditions in solids (in a wider sense) can be established using magic angle spinning (MAS), macroscopic sample orientation, combinations of both of these techniques, enhancement of mobility by highly viscous sample conditions, and a variety of radio frequency (RF) irradiation patterns. While the latter allows decoupling of interactions in spin space, the others facilitate averaging of interactions in real space. In addition, line-broadening effects from microscopic inhomogeneities can be reduced by appropriate methods of sample preparation.
Under decoupling conditions, isotropic interactions can report on the local structure, e.g. by the isotropic chemical shift. In addition, decoupled interactions can be selectively re-introduced (recoupling"), and used, for example, for controlled de-phasing or transfer of polarization, which allows to derive a number of structural parameters.
Solid-state NMR line widths The residual line width (full width at half max) of 13C nuclei under MAS conditions at 5–15 kHz spinning rate is typically in the order of 0.5–2 ppm, and may be comparable to solution-state NMR conditions. Even at MAS rates of 20 kHz and above, however, non linear groups (not a straight line) of the same nuclei linked via the homonuclear dipolar interactions can only be suppressed partially, leading to line widths of 0.5 ppm and above, which is considerably more than in optimal solution state NMR conditions. Other interactions such as the quadrupolar interaction can lead to line widths of 1000's of ppm due to the strength of the interaction. The first-order quadrupolar broadening is largely suppressed by sufficiently fast MAS, but the second-order quadrupolar broadening has a different angular dependence and cannot be removed by spinning at one angle alone. Ways to achieve isotropic lineshapes for quadrupolar nuclei include spinning at two angles simultaneously (DOR), sequentially (DAS), or through refocusing the second-order quadrupolar interaction with a two-dimensional experiment such as MQMAS or STMAS.
Anisotropic interactions in solution-state NMR From the perspective of solution-state NMR, it can be desirable to reduce motional averaging of dipolar interactions by alignment media. The order of magnitude of these residual dipolar couplings (RDCs) are typically of only a few rad/Hz, but do not destroy high-resolution conditions, and provide a pool of information, in particular on the orientation of molecular domains with respect to each other.
Dipolar truncation The dipolar coupling between two nuclei is inversely proportional to the cube of their distance. This has the effect that the polarization transfer mediated by the dipolar interaction is cut off in the presence of a third nucleus (all of the same kind, e.g. 13C) close to one of these nuclei. This effect is commonly referred to as dipolar truncation. It has been one of the major obstacles in efficient extraction of internuclear distances, which are crucial in the structural analysis of biomolecular structure. By means of labeling schemes or pulse sequences, however, it has become possible to circumvent this problem in a number of ways.
[edit] Nuclear spin interactions in the solid phase
[edit] Chemical shielding
The chemical shielding is a local property of each nucleus, and depends on the external magnetic field.
Specifically, the external magnetic field induces currents of the electrons in molecular orbitals. These induced currents create local magnetic fields that often vary across the entire molecular framework such that nuclei in distinct molecular environments usually experience unique local fields from this effect.
Under sufficiently fast magic angle spinning, or in solution-state NMR, the directionally dependent character of the chemical shielding is removed, leaving the isotropic chemical shift.
[edit] J-coupling
The J-coupling or indirect nuclear spin-spin coupling (sometimes also called "scalar" coupling despite the fact that J is a tensor quantity) describes the interaction of nuclear spins through chemical bonds.
[edit] Dipolar coupling
Main article: Dipolar coupling (NMR)
Nuclear spins exhibit a dipole moment, which interacts with the dipole moment of other nuclei (dipolar coupling). The magnitude of the interaction is dependent on the spin species, the internuclear distance, and the orientation of the vector connecting the two nuclear spins with respect to the external magnetic field B (see figure). The maximum dipolar coupling is given by the dipolar coupling constant d,
,
where r is the distance between the nuclei, and γ1 and γ2 are the gyromagnetic ratios of the nuclei. In a strong magnetic field, the dipolar coupling depends on the orientation of the internuclear vector with the external magnetic field by
.
Consequently, two nuclei with a dipolar coupling vector at an angle of θm=54.7° to a strong external magnetic field, which is the angle where D becomes zero, have zero dipolar coupling. θm is called the magic angle. One technique for removing dipolar couplings, at least to some extent, is magic angle spinning.
[edit] Quadrupolar interaction
Nuclei with a spin greater than one-half have a non spherical charge distribution. This is known as a quadrupolar nucleus. A non spherical charge distribution can interact with an electric field gradient caused by some form of non-symmetry (e.g. in a trigonal bonding atom there are electrons around it in a plane, but not above or below it) to produce a change in the energy level in addition to the Zeeman effect. The quadrupolar interaction is the largest interaction in NMR apart from the zeeman interaction and they can even become comparable in size. Due to the interaction being so large it can not be treated to just the first order, like most of the other interactions. This means you have a first and second order interaction, which can be treated separately. The first order interaction has an angular dependency with respect to the magnetic field of (3cos2θ − 1) (the P2 Legendre polynomial), this means that if you spin the sample at 
(~54.74°) you can average out the first order interaction over one rotor period (all other interactions apart from Zeeman, Chemical shift, paramagnetic and J coupling also have this angular dependency). However, the second order interaction depends on the P4 Legendre polynomial which has zero points at 30.6° and 70.1°. These can be taken advantage of by either using DOR (DOuble angle Rotation) where you spin at two angles at the same time, or DAS (Double Angle Spinning) where you switch quickly between the two angles. But these techniques suffer from the fact that they require special hardware (probe). A revolutionary advance is Lucio Frydman's multiple quantum magic angle spinning (MQMAS) NMR in 1995 and it has become a routine method for obtaining high resolution solid-state NMR spectra of quadrupolar nuclei[1]. A similar method to MQMAS is satellite transisition magic angle spinning (STMAS) NMR proposed by Zhehong Gan in 2000.
[edit] Other interactions
Paramagnetic substances are subject to the Knight shift.
[edit] History
See also: nuclear magnetic resonance or NMR spectroscopy articles for an account on discoveries in NMR and NMR spectroscopy in general.
History of discoveries of NMR phenomena, and the development of solid-state NMR spectroscopy:
Purcell, Torrey and Pound: "nuclear induction" on 1H in paraffin 1945, at about the same time Bloch et al. on 1H in water.
[edit] Modern solid-state NMR spectroscopy
Methods and techniques
[edit] Basic example
A fundamental RF pulse sequence and building-block in most solid-state NMR experiments is cross-polarization (CP) [Pines, 1973]. It can be used to enhance the signal of nuclei with a low gyromagnetic ratio (e.g. 13C, 15N) by magnetization transfer from nuclei with a high gyromagnetic ratio (e.g. 1H), or as spectral editing method (e.g. directed 15N→13C CP in protein spectroscopy). In order to establish magnetization transfer, the RF pulses applied on the two frequency channels must fulfill the Hartmann–Hahn condition [Hartmann, 1962]. Under MAS, this condition defines a relationship between the voltage through the RF coil and the rate of sample rotation. Experimental optimization of such conditions is one of the routine tasks in performing a (solid-state) NMR experiment.
CP is a basic building block of most pulse sequences in solid-state NMR spectroscopy. Given its importance, a pulse sequence employing direct excitation of 1H spin polarization, followed by CP transfer to and signal detection of 13C, 15N) or similar nuclei, is itself often referred to as CP experiment, or, in conjunction with MAS, as CP-MAS [Schaefer and Stejskal, 1976]. It is the typical starting point of an investigation using solid-state NMR spectroscopy.
[edit] Decoupling
Nuclear spin interactions need to be removed (decoupled) in order to increase the resolution of NMR spectra, and to isolate spin systems.
A technique that can substantially reduce or remove the chemical shift anisotropy, the dipolar coupling is sample rotation (most commonly magic angle spinning, but also off-magic angle spinning).
Homonuclear RF decoupling decouples spin interactions of nuclei which are the same as those which are being detected. Heteronuclear RF decoupling decouples spin interactions of other nuclei.
[edit] Recoupling
Although the broaden lines are often not desired, dipolar couplings between atoms in the crystal lattice can also provide very useful information. Dipolar coupling are distance dependent, and so they may be used to calculate interatomic distances in isotopically labelled molecules.
Because most dipolar interactions are removed by sample spinning, recoupling experiments are needed to re-introduce desired dipolar couplings so they can be measured.
An example of a recoupling experiment is the Rotational Echo DOuble Resonance (REDOR) experiment [Gullion and Schaefer, 1989].
[edit] Applications
[edit] Material science
Solid-state NMR spectroscopy can, for example, be used to investigate the molecular structure of polymers and speciation in glassy materials.
[edit] Biology
Membrane proteins and amyloid fibrils, the latter related to Alzheimer's disease and Parkinson's disease, are two examples of application where solid-state NMR spectroscopy complements solution-state NMR spectroscopy and beam diffraction methods (e.g. X-ray crystallography, electron microscopy).
[edit] Chemistry
Solid-state NMR spectroscopy serves as an analysis tool in organic and inorganic chemistry. SSNMR is also a valuable tool to study local dynamics, kinetics, and thermodynamics of a variety of systems.
[edit] References
- ^ Isotropic Spectra of Half-Integer Quadrupolar Spins from Bidimensional Magic-Angle Spinning NMR, Lucio Frydman and John S. Hardwood, J. Am. Chem. Soc., 1995, 117, 5367—5368, (1995)
[edit] Suggested readings for beginners
- David D. Laws, Hans-Marcus L. Bitter, and Alexej Jerschow: "Solid-State NMR Spectroscopic Methods in Chemistry", Angewandte Chemie International Edition (engl.), Vol. 41, pp. 3096 (2002) doi:10.1002/1521-3773(20020902)41:17<3096::AID-ANIE3096>3.0.CO;2-X
- Levitt, Malcolm H. Spin Dynamics: Basics of Nuclear Magnetic Resonance, Wiley-VCH. (NMR basics, including solids)
- Duer, Melinda J.: Introduction to Solid-State NMR Spectroscopy, Blackwell Publishing. (Some detailed examples of SSNMR spectroscopy)
[edit] Advanced readings
Books and major review articles
- Mehring, M, Principles of High Resolution NMR in Solids, Springer, 2nd ed., 1983
- Slichter, Principles of Magnetic Resonance, 3rd ed.
- Schmidt-Rohr and Spiess: Multidimensional Solid-State NMR and Polymers, Academic Press, 1994.
2D and Solid state NMR by Cecil Dybowski & Robert L.Lichter
[edit] General
References to books and research articles
- Andrew, E. R., Bradbury, A. and Eades, R. G., "Removal of Dipolar Broadening of Nuclear Magnetic Resonance Spectra of Solids by Specimen Rotation," Nature 183, 1802, (1959)
- Ernst, Bodenhausen, Wokaun: Principles of Nuclear Magnetic Resonance in One and Two Dimensions
- Hartmann S.R., Hahn E.L., "Nuclear Double Resonance in the Rotating Frame" Phys. Rev. 128 (1962) 2042.
- Pines A., Gibby M.G., Waugh J.S., "Proton-enhanced NMR of dilute spins in solids" J. Chem. Phys. 59, 569-90, (1973)
- Purcell, Torrey and Pound (1945).
- Schaefer, J. and Stejskal, E. O., "Carbon-13 Nuclear Magnetic Resonance of Polymers Spinning at the Magic Angle," Journal of the American Chemical Society 98, 1031 (1976).
- Gullion, T. and Schaefer, J., "Rotational-Echo, Double-Resonance NMR," J. Magn. Reson., 81, 196 (1989).
[edit] External links
- NMRWiki.ORG NMR resource you can edit
- SSNMRBLOG Solid-State NMR Literature Blog by Prof. Rob Schurko's Solid-State NMR group at the University of Windsor
