Solar panels on spacecraft

From Wikipedia, the free encyclopedia

This article does not cite any references or sources. (November 2006) Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed.

It has been suggested that this article or section be merged with Space solar power . (Discuss)

Spacecraft operating in the inner solar system usually rely on the use of photovoltaic solar panels to derive electricity from sunlight. In the outer solar system, where the sunlight is too weak to produce sufficient power, radioisotope thermal generators (RTGs) are used as a power source^[1].

Contents 1 History 2 Implementation 3 Types of solar cells typically used 4 Spacecraft that have used solar power 5 Power Available 6 Future Uses 7 See also 8 References

[edit] History

The first spacecraft to use solar panels was the Vanguard 1 satellite, launched by the US in 1958.

[edit] Implementation

Solar panels need to have a lot of surface area that can be pointed towards the Sun as the spacecraft moves. More exposed surface area means more electricity can be converted from light energy from the Sun. Since spacecraft have to be small, this limits the amount of power that can be produced ^[1].

Spacecraft are built so that the solar panels can be pivoted as the spacecraft moves. Thus, they can always stay in the direct path of the light rays no matter how the spacecraft is pointed. Spacecraft are usually designed with solar panels that can always be pointed at the Sun, even as the rest of the body of the spacecraft moves around, much as a tank turret can be aimed independently of where the tank is going. A tracking mechanism is often incorporated into the solar arrays to keep the array pointed towards the sun^[1].

Sometimes, satellite operators purposefully orient the solar panels to "off point," or out of direct alignment from the Sun. This happens if the batteries are completely charged and the amount of electricity needed is lower than the amount of electricity made; off-pointing is also sometimes used on the International Space Station for orbital drag reduction.

[edit] Types of solar cells typically used

Gallium arsenide-based solar cells are typically favored over silicon in industry, because they have a higher efficiency. The most efficient solar cells currently in production are multi-junction cells. These use a combination of several layers of both gallium arsenide and silicon to capture the largest spectrum of light possible. Leading edge multi-junction cells are capable of nearly 29% efficiency under ideal conditions. ^[2]

[edit] Spacecraft that have used solar power

To date, solar power, other than for propulsion, has been practical for spacecraft operating no farther from the sun than the orbit of Mars. For example, Magellan, Mars Global Surveyor, and Mars Observer used solar power as does the Earth-orbiting, Hubble Space Telescope. The Rosetta space probe, launched March 2, 2004, will use solar panels as far as the orbit of Jupiter (5.25 AU); previously the furthest use was the Stardust spacecraft at 2 AU. Solar power for propulsion was also used on the European lunar mission SMART-1 with a Hall effect thruster.

The upcoming Juno mission will be the first mission to Jupiter to use solar panels instead of the traditional RTGs that are used by previous outer solar system missions^[3].

[edit] Power Available

In 2005 Rigid-Panel Stretched Lens Arrays were producing 7 kW per wing. Solar arrays producing 300 W/kg and 300 W/m² from the sun's 1366 W/m² energy near the Earth are available. Entech Inc. hopes to develop 100 kW panels by 2010 and 1 MW panels by 2015. ^[4]

[edit] Future Uses

For future missions, it is desirable to reduce solar array mass, and to increase the power generated per unit area. This will reduce overall spacecraft mass, and may make the operation of solar-powered spacecraft feasible at larger distances from the sun. Solar array mass could be reduced with thin-film photovoltaic cells, flexible blanket substrates, and composite support structures. Solar array efficiency could be improved by using new photovoltaic cell materials and solar concentrators that intensify the incident sunlight. Photovoltaic concentrator solar arrays for primary spacecraft power are devices which intensify the sunlight on the photovoltaics. This design uses a flat lens, called a Fresnel lens, which takes a large area of sunlight and concentrates it onto a smaller spot. The same principle is used to start fires with a magnifying glass on a sunny day.

Solar concentrators put one of these lenses over every solar cell. This focuses light from the large concentrator area down to the smaller cell area. This allows the quantity of expensive solar cells to be reduced by the amount of concentration. Concentrators work best when there is a single source of light and the concentrator can be pointed right at it. This is ideal in space, where the Sun is a single light source. Solar cells are the most expensive part of solar arrays, and arrays are often a very expensive part of the spacecraft. This technology may allow costs to be cut significantly due to the utilization of less material.

It has been proposed that it may be possible to develop space-based solar plants — solar power satellites with large arrays of photovoltaic cells-- that would beam the energy they produce to Earth using microwaves or lasers. This could, in principle, be a significant source of electrical power generated using non-fossil fuel sources. Japanese and European space agencies, among others, are analyzing the possibility of developing such power plants in the 21st century.

[edit] See also

• Main article on space solar power
• Main article on solar cells
• Main article on Photovoltaic arrays
• For solar arrays on the International Space Station, see ISS_Solar_Arrays#Solar_arrays or Electrical system of the International Space Station

[edit] References