Snow

From Wikipedia, the free encyclopedia

Part of the Nature series on
Weather
 
Seasons

Spring · Summer
Autumn · Winter

Dry season
Wet season

Storms

Thunderstorm · Tornado
Tropical cyclone (Hurricane)
Extratropical cyclone
Winter storm · Blizzard
Ice storm

Precipitation

Fog · Drizzle · Rain
Freezing rain · Ice pellets
Hail · Snow · Graupel

Topics

Meteorology
Weather forecasting
Climate · Air pollution

Weather Portal
 v  d  e 

Snow is a type of precipitation in the form of crystalline water ice, consisting of a multitude of snowflakes that fall from clouds. The process of precipitation is called snowfall.

Since snow is composed of small ice particles, it is a granular material. It has an open and therefore soft structure, unless packed by external pressure. The METAR code for snow is SN.

Contents

[edit] Snowflakes

Animation of snowcover changing with the seasons
Animation of snowcover changing with the seasons
Trees covered with snow
Trees covered with snow

Snow forms when water vapor condenses directly into ice crystals, usually in a cloud. Floating cloud particles (ice nucleators, often of biological origin [1]) are needed in order for snowflakes to form at temperatures above -40C. 85% of these nuclei are airborne bacteria, with dust particles making up the rest.[2] The ice crystals which form around the ice nucleators typically have a diameter of several milimetres and usually have six lines of symmetry. A snowflake is an aggregate of such ice crystals and may be several centimeters large[3]. The term "snowflake" is also used below for the symmetrical ice crystals themselves. The individual ice crystals are clear but because of the amount of light the individual crystals reflect snowflakes appear white in color unless contaminated by impurities.

[edit] Geometry

Symmetry of an idealized snowflake
Symmetry of an idealized snowflake
The first of a magnification series of a snow crystal (view the entire series) using a low temperature scanning electron microscope
The first of a magnification series of a snow crystal (view the entire series) using a low temperature scanning electron microscope

Large, well formed snowflakes are relatively flat and have six approximately identical arms, so that the snowflake nearly has the same 6-fold dihedral symmetry as a regular hexagon or hexagram. This symmetry arises from the hexagonal crystal structure of ordinary ice. However, the exact shape of the snowflake is determined by the temperature and humidity at which it forms.[3]. Rarely, at a temperature of around −2 °C (28 °F), snowflakes can form in threefold symmetry — triangular snowflakes. [4] Snowflakes are not perfectly symmetrical however. The most common snowflakes are visibly irregular, although near-perfect snowflakes may be more common in pictures because they are more visually appealing.

Snowflakes can come in many different forms, including columns, needles, bricks and plates (with and without "dendrites" - the "arms" of some snowflakes). These different forms arise out of different temperatures and water saturation - among other conditions. Six petaled ice flowers grow in air between 0 °C (32 °F) and −3 °C (27 °F). The vapor droplets solidify around a dust particle. Between temperatures of −1 °C (30 °F) and −3 °C (27 °F), the snowflake will be in the form of a dendrite or a plate or the six petaled ice flower. As temperatures get colder, between −5 °C (23 °F) and −10 °C (14 °F), the crystals will form in needles or hollow columns or prisms. When the temperature becomes even colder from −10 °C (14 °F) to −22 °C (−8 °F) the ice flowers are formed again, and at temperatures below −22 °C (−8 °F), the vapors will turn into prisms again. If a crystal has started forming at around −5 °C (23 °F), and is then exposed to warmer or colder temperatures, a capped column may be formed which consists of a column-like design capped with a dendrite or plate-like design on each end of the column.[3] At even colder temperatures, the snowflake design returns to the more common dendrite and plate. At temperatures approaching −20 °C (−4 °F), sectored plates are formed which appears as a dendrite, with each dendrite appearing flattened, like the design of a snowflake plate.[3]

Snowflakes by Wilson Bentley, 1902
Snowflakes by Wilson Bentley, 1902


There are, broadly, two possible explanations for the symmetry of snowflakes. First, there could be communication or information transfer between the arms, such that growth in each arm affects the growth in each other arm. Surface tension or phonons are among the ways that such communication could occur. The other explanation, which appears to be the prevalent view, is that the arms of a snowflake grow independently in an environment that is believed to be rapidly varying in temperature, humidity and other atmospheric conditions. This environment is believed to be relatively spatially homogeneous on the scale of a single flake, leading to the arms growing to a high level of visual similarity by responding in identical ways to identical conditions, much in the same way that unrelated trees respond to environmental changes by growing near-identical sets of tree rings. The difference in the environment in scales larger than a snowflake leads to the observed lack of correlation between the shapes of different snowflakes. The sixfold symmetry happens because of the basic hexagonal crystalline structure from which the snowflake grows. The exact reason for the threefold symmetry of triangular snowflakes is still a mystery[citation needed] although trigonal symmetry is a subsymmetry of hexagonal.

There is a widely held belief that no two snowflakes are alike. Strictly speaking, it is extremely unlikely for any two macroscopic objects in the universe to contain an identical molecular structure; but there are, nonetheless, no known scientific laws that prevent it. In a more pragmatic sense, it's more likely—albeit not much more—that two snowflakes are virtually identical if their environments were similar enough, either because they grew very near one another, or simply by chance. The American Meteorological Society has reported that matching snow crystals were discovered in Wisconsin in 1988 by Nancy Knight of the National Center for Atmospheric Research.[citation needed] The crystals were not flakes in the usual sense but rather hollow hexagonal prisms.

Snowflakes
Snowflakes

[edit] Snow on the ground

Snow in the city of Rovaniemi, Finland
Snow in the city of Rovaniemi, Finland
Record breaking snowfall March 2008 at Aubrey, Texas
Record breaking snowfall March 2008 at Aubrey, Texas

Snow remains on the ground until it melts or sublimes. In colder climates this results in snow lying on the ground all winter; when the snow does not all melt in the summer it becomes glaciers.

This is often called snowpack, especially when it does persist a long time. The deepest snowpacks occur in mountainous regions. It is influenced by temperature and wind events which determine melting, accumulation and wind erosion.

The water equivalent of the snow is the thickness of a layer of water having the same content. For example, if the snow covering a given area has a water equivalent of 50 centimetres (20 in), then it will melt into a pool of water 50 centimetres (20 in) deep covering the same area. This is a much more useful measurement to hydrologists than snow depth, as the density of cool freshly fallen snow widely varies. New snow commonly has a density of between 5% and 15% of water. Snow that falls in maritime climates is usually denser than snow that falls in mid-continent locations because of the higher average temperatures over oceans than over land masses. Cloud temperatures and physical processes in the cloud affect the shape of individual snow crystals. Highly branched or dendritic crystals tend to have more space between the arms of ice that form the snow flake and this snow will therefore have a lower density, often referred to as "dry" snow. Conditions that create columnar or platelike crystals will have much less air space within the crystal and will therefore be more dense and feel "wetter".

First snow of winter, Truckee, California, United States
First snow of winter, Truckee, California, United States

Once the snow is on the ground, it will settle under its own weight (largely due to differential evaporation) until its density is approximately 30% of water. Increases in density above this initial compression occur primarily melting and refreezing, caused by temperatures above freezing or by direct solar radiation. By late spring, snow densities typically reach a maximum of 50% of water.[5]

Spring snow melt is a major source of water supply to areas in temperate zones near mountains that catch and hold winter snow, especially those with a prolonged dry summer. In such places, water equivalent is of great interest to water managers wishing to predict spring runoff and the water supply of cities downstream. Measurements are made manually at marked locations known as snow courses, and remotely using special scales called snow pillows.

Many rivers originating in mountainous or high-latitude regions have a significant portion of their flow from snowmelt. This often makes the river's flow highly seasonal resulting in periodic flooding. In contrast, if much of the melt is from glaciated or nearly glaciated areas, the melt continues through the warm season, mitigating that effect.

[edit] Energy balance

The energy balance of the snowpack is dictated by several heat exchange processes. The snowpack absorbs solar shortwave radiation that is partially blocked by cloud cover and reflected by snow surface. A longwave heat exchange takes place between the snowpack and its surrounding environment that includes overlaying air mass, tree cover and clouds. Convective (sensible) heat exchange between the snowpack and the overlaying air mass is governed by the temperature gradient and wind speed. Moisture exchange between the snowpack and the overlaying air mass is accompanied with latent heat transfer that is influenced by vapor pressure gradient and air wind. Rain on snow could induce significant heat input to the snowpack. A generally insignificant conductive heat exchange takes place between the snowpack and the underlying ground. That is the reason there is a small temperature rise after or before the snowfall.[6]

[edit] Effects on human society

Section of an icehouse
Section of an icehouse

[edit] Activity

Substantial snowfall can disrupt public infrastructure and services, slowing human activity even in regions that are accustomed to such weather. Air and ground transport may be greatly inhibited or shut down entirely. Populations living in snow-prone areas have developed various ways to travel across the snow, such as skis, snowshoes, and sleds pulled by horses, dogs, or other animals. Basic infrastructures such as electricity, telephone lines, and gas supply can also fail. In addition, snow can make roads much harder to travel and cars attempting to traverse them can easily become stuck. The combined effects can lead to a "snow day" on which gatherings such as school, work, or church are officially canceled. In areas that normally have very little or no snow, a snow day may occur when there is only light accumulation or even the threat of snowfall, since those areas are ill-prepared to handle any amount of snow.

[edit] Agriculture

Snowfall can be beneficial to agriculture by serving as a thermal insulator, conserving the heat of the Earth and protecting crops from subfreezing weather. Some agricultural areas depend on an accumulation of snow during winter that will melt gradually in spring, providing water for crop growth.

[edit] Conservation

In areas near mountains, people have harvested snow and stored it as layers of ice covered by straw or sawdust in icehouses. This allowed the ice to be used in summer for refrigeration or medical uses.

[edit] Damage

A mudslide, flash flood, or avalanche can occur when excessive snow has accumulated on a mountain and there is a sudden change of temperature. Large amounts of snow that accumulate on top of man-made structures can lead to structural failure.

[edit] Records

The highest seasonal total snowfall ever measured was at Mount Baker Ski Area, outside of the town Bellingham, Washington in the United States during the 19981999 season. Mount Baker received 1,140 inches (29 m) of snow,[7] thus surpassing the previous record holder, Mount Rainier, Washington, which during the 19711972 season received 1,122 in. (28.5 m) of snow.[8] Guinness World Records list the world’s largest snowflakes as those of January 1887 at Fort Keogh, Montana;. allegedly one measured 15 inches (38 cm) wide.[9]

[edit] Recreation

Building a snowman.
Building a snowman.

[edit] Types of snow

Hoar frost that grows on the snow surface due to water vapor moving up through the snow on cold, clear nights
Hoar frost that grows on the snow surface due to water vapor moving up through the snow on cold, clear nights

[edit] Falling snow

Blizzard
A long-lasting snow storm with intense snowfall and usually high winds. Particularly severe storms can create whiteout conditions where visibility is reduced to less than 1 m.
Columns
A class of snow flakes that is shaped like a six sided column. One of the 4 classes of snow flakes.
Dendrites
A class of snow flakes that has 6 points, making it somewhat star shaped. The classic snow flake shape. One of the 4 classes of snow flakes.
Flurry
A period of light snow with usually little accumulation with occasional moderate snowfall.
Freezing rain
Supercooled rain that freezes on impact with a sufficiently cold surface. This can cover trees in a uniform layer of very clear, shiny ice – a beautiful phenomenon, though excessive accumulation can break tree limbs and utility lines, causing utility failures and possible property damage.
Snowbird ski resort, one of the snowiest places in the U.S.
Snowbird ski resort, one of the snowiest places in the U.S.
Graupel
Precipitation formed when freezing fog condenses on a snowflake, forming a ball of rime ice. Also known as snow pellets.
Ground blizzard
Occurs when a strong wind drives already fallen snow to create drifts and whiteouts.
Hail
Many-layered ice balls, ranging from "pea" sized (0.25 in, 6 mm) to "golf ball" sized (1.75 in, 43 mm), to, in rare cases, "softball" sized or greater (­>4.25 in, 108 mm).
Hailstorm
A storm of hail. If the hail is sufficiently large, it can cause damage to cars or even people.
Lake effect snow
Produced when cold winds move across long expanses of warmer lake water, picking up water vapor which freezes and is deposited on the lake's shores.
Needles
A class of snow flakes that are acicular in shape (their length is much longer than their diameter, like a needle). One of the 4 classes of snow flakes.
Rimed snow
Snow flakes that are partially or completely coated in tiny frozen water droplets called rime. Rime forms on a snow flake when it passes through a super-cooled cloud. One of the 4 classes of snow flakes.
Sleet
In Britain, rain mixed with snow; Some Americans also refer to this as sleet, while others refer to sleet as ice pellets formed when snowflakes pass through a layer of warm air, partially or completely thaw, then refreeze upon passing through sufficiently cold air during further descent.
Snow on trees in DuBois, Pennsylvania.
Snow on trees in DuBois, Pennsylvania.
Snow pellets
See graupel.
Snow squall
A brief, very intense snowstorm.
Snow storm
A long storm of relatively heavy snow.
Soft hail
See graupel.
Thundersnow
A thunderstorm which produces snow as the primary form of precipitation.
Wintry mix
Precipitation consisting of both snow and rain.

[edit] Snow on the ground

Snow covering a leaf
Snow covering a leaf
Snow blowing from a roof in Ottawa
Snow blowing from a roof in Ottawa
Artificial snow
Snow can be also manufactured using snow cannons, which actually create tiny granules more like soft hail (this is sometimes called "grits" by those in the southern U.S. for its likeness to the texture of the food). In recent years, snow cannons have been produced that create more natural-looking snow, but these machines are prohibitively expensive.
Blowing snow
Snow on ground that is being moved around by wind. See ground blizzard.
Chopped powder
Powder snow that has been cut up by previous skiers.
Corn
Coarse, granular wet snow. Most commonly used by skiers describing good spring snow. Corn is the result of diurnal cycle of melting and refreezing.
Cornice
An overhanging formation of windblown snow. Important in skiing and alpine climbing because the overhang can be unstable and hard to see from the leeward side.
Crud
This covers varieties of snow that all but advanced skiers find impassable. Subtypes are (a) windblown powder with irregularly shaped crust patches and ridges, (b) heavy tracked spring snow re-frozen to leave a deeply rutted surface strewn with loose blocks, (c) a deep layer of heavy snow saturated by rain (although this may go by another term). Crud is negotiated with a even weighting along the length of the skis, and smooth radius turns started, if necessary, with a pop or jump. When an advanced skier falls over on crud, it is probably because it is 'heavy crud', q.v.
Crust
A layer of snow on the surface of the snowpack that is stronger than the snow below, which may be powder snow. Depending on their thickness and resulting strength, crusts can be termed "supportable," meaning that they will support the weight of a human, "breakable," meaning that they will not, or "zipper," meaning that a skier can break and ski through the crust. Crusts often result from partial melting of the snow surface by direct sunlight or warm air followed by re-freezing.
Depth Hoar
Faceted snow crystals, usually poorly or completely unbonded (unsintered) to adjacent crystals, creating a weak zone in the snowpack. Depth hoar forms from metamorphism of the snowpack in response to a large temperature gradient between the warmer ground beneath the snowpack and the surface. The relatively high porosity (percentage of air space), relatively warm temperature (usually near freezing point), and unbonded weak snow in this layer can allow various organisms to live in it.
Finger Drift
A narrow snow drift(1-3 feet in width) crossing a roadway. Several finger drifts in succession resemble the fingers of a hand.
Heavy crud
See 'Crud'.
Ice
Densely packed material formed from snow that doesn't contain air bubbles. Depending on the snow accumulation rate, the air temperature, and the weight of the snow in the upper layers, it can take snow a few hours or a few decades to form into ice.
Firn
Snow which has been lying for at least a year but which has not yet consolidated into glacier ice. It is granular.
Packed Powder
The most common snow cover on ski slopes, consisting of powder snow that has lain on the ground long enough to become compressed, but is still loose.
Packing snow
Snow that is at or near the melting point, so that it can easily be packed into snowballs and hurled at other people or objects. This is perfect for snow fights and other winter fun, such as making a snowman, or a snow fort.
Penitentes
Tall blades of snow found at high altitudes.
Pillow Drift
A snow drift crossing a roadway and usually 10-15 feet in width and 1-3 three feet in depth.
Powder
Freshly fallen, uncompacted snow. The density and moisture content of powder snow can vary widely; snowfall in coastal regions and areas with higher humidity is usually heavier than a similar depth of snowfall in an arid or continental region. Light, dry (low moisture content, typically 4 - 7% water content) powder snow is prized by skiers and snowboarders. It is often found in the Rocky Mountains of North America and in Niseko, Japan.
The textures of a snowdrift on the Long Mynd, Shropshire
The textures of a snowdrift on the Long Mynd, Shropshire
Slush
Snow which partially melts upon reaching the ground, to the point that it accumulates in puddles of partially-frozen water.
Snirt
Snow that is dirty, often seen by the side of roads and parking lots that have been plowed.
Snowdrift
Large piles of snow which occur near walls and curbs, as the wind tends to push the snow up toward the vertical surfaces.
Surface Hoar
Faceted, corn-flake shaped snow crystals that are a type of frost that forms on the surface of the snow pack on cold, clear, calm nights. Subsequent snow fall can bury layers of surface hoar encorporating them into the snowpack where they can form a weak layer. Sometimes referred to as hoar frost.
Watermelon snow
A reddish/pink colored snow that smells like watermelons, and is caused by a red colored green algae called Chlamydomonas nivalis.
Wind slab
A layer of relatively stiff, hard snow formed by deposition of wind blown snow on the leeward side of a ridge or other sheltered area. Wind slabs can form over weaker, softer freshly fallen powder snow creating an avalanche hazard on steep slopes.
Wikimedia Commons has media related to:

[edit] See also

Find more about Snow on Wikipedia's sister projects:
Dictionary definitions
Textbooks
Quotations
Source texts
Images and media
News stories
Learning resources

[edit] References

  1. ^ Christner, Brent C.; Morris, Cindy E.; Foreman, Christine M.; Cai, Rongman; Sands, David C. (2008). "Ubiquity of Biological Ice Nucleators in Snowfall". Science 319 (5867): 1214. doi:10.1126/science.1149757. 
  2. ^ Brenn, Max. Bacteria – The Main Ingredient in Snowflakes, Scientists Say. eFluxMedia. 29-02-2008.
  3. ^ a b c d Klesius, Michael (2007), "The Mystery of Snowflakes", National Geographic 211 (1): 20, ISSN 0027-9358
  4. ^ Guide to Snowflakes
  5. ^ California Data Exchange Center
  6. ^ http://www.scientificjournals.org/journals2007/articles/1118.pdf
  7. ^ NOAA: Mt. Baker snowfall record sticks
  8. ^ http://www.nps.gov/archive/mora/interp/faq.htm
  9. ^ Giant Snowflakes as Big as Frisbees? Could Be - Crystalization - Science - New York Times

[edit] External links