Slotcar racing

From Wikipedia, the free encyclopedia

 This needs additional citations for verification.
Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (June 2006)

Note: this article concerns slot car racing competition. For information on the general slot car hobby, including more detailed coverage of history, scales, track-types and mechanical functioning, see slot car.

Two Scalextric VW Beetles on track.
Two Scalextric VW Beetles on track.

Slot car racing (also called slotcar racing or slot racing) is the competitive hobby of racing with powered miniature autos (or other vehicles) which are guided by grooves or slots in the track on which they run.

Slot cars are usually models of actual automobiles, though some have bodies purpose-designed for miniature racing. Most enthusiasts use commercially-available slot cars (often modified for better performance), others motorize static models, and some "scratch-build," creating their own mechanisms and bodies from basic parts and materials.

Slot car racing ranges from casual get-togethers at home tracks, using whatever cars the host makes available, to very serious competitions in which contestants painstakingly build or modify their own cars for maximum performance and compete in a series of races culminating in a national championship. Some hobbyists, much as in model railroading, build elaborate tracks, sculpted to have the appearance of a real-life racecourse, including miniature buildings, trees and people, while the more serious competitive racers often prefer a track unobstructed by scenery.


Contents

[edit] How it works

Drivers generally use a hand-held controller to regulate a low-voltage electric motor hidden within the car. Each car runs on a separate lane, with its own guide-slot, picking up power from metal strips in the track. The challenge in racing slot cars comes in taking curves and other obstacles at the highest speed that will not cause the car to lose its grip and spin sideways, or 'deslot' and leave the track altogether.

Today, in all scales, traction magnets are often used to provide downforce to help hold the car to the track at higher speeds, though some enthusiasts believe magnet-free racing provides greater challenge and enjoyment and allows the back of the car to slide or "drift" outward for visual realism.

[edit] Common slot car scales

There are three common slotcar scales (sizes) used for serious competition: 1:24 scale, 1:32 scale, and so-called HO (a generalized size, originally 1:76-1:87, now usually closer to 1:64 scale). These scales are also commonly written as 1/24, 1/32, 1/87 and 1/64. The scale designation indicates how many units of length (such as an inch or millimeter)on the actual car are represented by one unit on the model.

- 1:24 scale cars are the largest slot cars commonly raced. A typical 1:24 car might be 7 to 8 inches long (18-20 cm). 1:24 cars require a course so humungous as to be impractical for many home enthusiasts, so most serious 1:24 racing is done at commercial or club tracks.

- 1:32 scale cars are smaller and more suited to home-sized race courses but they are also widely raced on commercial tracks, in hobbyshops or in clubs. A 1:32 car averages 5 to 6 inches (13-15 cm).

A vintage Aurora HO slot car, the AMC Matador stocker, approx. 1:64 scale, circa 1975.
A vintage Aurora HO slot car, the AMC Matador stocker, approx. 1:64 scale, circa 1975.

- HO-sized cars vary in scale, running from 1:87 (generally the older cars) to 1:64 in scale; but they all run on track of approximately the same width, and are generically referred to as HO slot cars. A typical car is from 2.5 to 3.5 inches (5.5-8 cm). Though there is HO racing on commercial and shop-tracks, probably most HO racing occurs on home racetracks.

In addition to the major scales, 1:43 slot car sets are generally marketed today (2006) as children's toys. So far, there is little organized competition in 1:43, but the scale is gaining some acceptance among adult hobbyists for its affordability and moderate space requirements. An average car would be 4.3" (10.9 cm).

[edit] Slot car tracks for competition

Many home racetracks are made from the molded-plastic commercial track sections found in race sets; these courses are known as "Plastic Tracks." Shop and club tracks used for serious competition (especially in 1:32 and 1:24 scales) are usually "Routed Tracks" in which the guide slots for the entire racecourse are cut into one or a few large pieces of sheet material (such as plywood or MDF) providing a smooth and consistent surface that allows cars to perform to their full potential.

Competition tracks are usually laid out as road courses with many turns, though ovals and "tank tread" (trapezoidal) ovals are also fairly common. On a road course or oval, each car and each lane is generally marked with "lane tape" of a distinguishing color, allowing the corner marshals (officials) to return cars that have spun off the track to the proper lane.

Generally, tracks for formal competition may have banked corners and may bridge one section over another, but may not otherwise use "trick" configurations. Home tracks often include special features to increase the drama and/or challenge of racing, such as slots that wiggle or squeeze the lanes together, bumps, airborne jumps, or uneven surfaces, but these are typically called "toy" tracks and are not used for competition in more serious organizations.

A different segment of the hobby is slot car drag racing on a long straight strip of track. In HO size, these dragstrips are often a scale quarter-mile.

1:24 Scale tracks used for competition are generally 6-8 lane routed tracks with either wooden or flexible plastic retaining walls. The tracks are usually located in commercial or purpose-built racing centres. Most of the tracks used in the USRA regional and national events are either original American Raceways (AMF) commercial tracks or copies of these designs made from original blueprints. Generally tracks used for regional or national competition have an epoxy or polymer painted surface with braided electrical contacts. In USRA division 1, the use of traction-enhancing compounds on the racing surface ("glue" or "goop") is allowed.

The most popular type of 1:24 track is the "Blue King" (155 feet) which is the track that is recognized for world records in 1:24 racing. The current (2006) world record qualifying lap is held by Benny Justice at 1.4632 seconds, which computes to 105.93 feet per second! The "King" track is unusual in that the segments are "named" starting from the main straight in an anti-clock wise direction: bank, chute, deadman (corner), finger, back straight, 90 (corner), donut (corner), lead-on, and top-turn. Generally the "King" tracks are used for wing-car racing, where unbanked "flat" tracks of various designs are used for scale racing. A good example of a championship "flat" track is the Gary Gerding designed track installed in July 2007 at Mid America Raceway and Hobbies near Aurora, IL.

1:32 Scale is usually run on the same tracks as 1:24, at least in the USA.

HO Scale competition tracks are typically between 60 and 100 ft in length and 4 to 6 lanes wide. Plastic tracks, often modified for improved performance, are more common in HO competition than in the larger scales, as is the use of large home courses for formal racing.

[edit] Electrical standards for competition

Most HO rule sets require tracks to provide voltage between 18.5 and 19.0 volts, and at least 5 amperes per lane; 1:32 racing is between 12 and 16 volts depending on type of car and 1:24 racing is usually at 14 volts for qualifying and 12 under racing conditions. Lead-acid batteries or electronically-regulated power supplies are used to achieve this, though batteries are not used at national UFHORA events due to their inconsistent voltage.

[edit] Competition formats

Several race formats are employed in competition as time allows. The quickest to run is called round robin, which can be run in either of two ways. The first (and least common) way is begin with one driver on one lane of the track, a segment usually consisting of 2 minutes is run in which the driver attempts to complete as many laps as he can.

The second (and most common) way to run a round robin is to have four drivers (or as many as there are lanes) start at a time, and rotate through all the lanes, before being replaced by the next set of drivers. This is known as a "heat" or "consi". Often a small amount of practice time (usually 30 seconds) will be given to the drivers prior to the start of each heat. If there are an odd number of drivers such that they are not wholly divisible into the number of lanes, one of two measures is taken: either a heat is run with one or more positions unfilled, or a heat is run with extra drivers, with a "sit-out" position. After all drivers have run their heat, placement is determined by total laps completed.

Often round robins are modified to include a "main" and sometimes also a "last-chance" heat. When run with a main, the round robin is run as normal, but at the end the top competitors (as many as there are lanes) run an extra heat. This heat is usually longer (3 to 5 minutes per segment, 1.5 "pit" time, and 1 minute practice before the heat). At the end the drivers are re-placed based on the new lap totals.

Last-chance heats are similar to mains. The top competitors (number of lanes minus one) from the round robin move into the main, and the runners-up (as many as there are lanes) are moved into the last chance heat. The last chance heat is run before the main, and is usually run with the same time parameters as the other heats. At the end, the top competitors from the last-chance are re-placed based on their new lap totals (though never lower than a comptetitor that didn't make the last-chance), and the winner of the heat moves into the final position in the main.

Bracketed formats are usually reserved for national events, and include qualifying, elimination consis, semifinals, and a main.

When the segment time has elapsed, a small amount of time, usually one minute, is given for the driver to switch lanes, perform any necessary maintenance to his car, and return his car to its resting position (albeit in a different lane). At the same time, the next driver in the succession moves into the first lane, placing his car at the starting position. When a driver completes all the lanes, his total laps and final position are recorded. This continues until all drivers have completed all lanes. Lap totals are compared to determine placement.

Most racing organisations allow a "track call" (where the power is turned off) for a situation where a race car is in the wrong lane. This is also referred to as a "rider" and is considered to be a dangerous and unfair situation. Track calls are also sometimes used in the event that a car flies off the table and cannot be located by a marshal.

[edit] Slot racing organizations

1:24 scale racing organizations There are many different local, regional, national, and international organizations for 1:24 scale slot cars. 1:24 scale is primarilarily raced at commercial slot car raceways. The largest USA organisation, holding 2 Divisional USA National Championship events every year, is the USRA, United Slot Racers Association. The International Slot Racing Association (ISRA) sanctions the World Slot Car Racing Championship in a different country every year.

1:32 scale racing organizations In 2004, the True Scale Racing Federation (TSRF) was established by former pro 1:24 racer Phillipe de Lespinay (aka: PdL) with the goal being to establish a North American "true scale" 1:24 and 1:32 North American racing series. The TSRF concept is very similar to full-scale "spec" racing where only TSRF approved equipment can be used for competition. Although the TSRF-legal equipment has been available for some time, the racing series is still in its genesis, having mostly run points-races in the Buena Park, CA area. It is important to note that the TSRF racing series has attracted "name" racers such as Mike Steube, Paul Sterrett, and Mike Aguirre (see "USRA Division 3" above). A very active North American 1/32 Slot Racing Club is the Chicago-based West Suburban Slot Car Association (WSSCA).

HO Organizations There are two large HO racing organizations in the US: HOPRA (the HO Professional Racing Association) and UFHORA (the United Federation of HO Racers Association). Each hosts a national competition annually, usually in July. There are many state-wide organizations running under HOPRA and/or UFHORA rule sets.

The Fray In Ferndale , California boasts the largest turnout of any slot car race in the world. The highly competitive race is held yearly, in February, and more than 100 individuals, and 16 teams, show up to race on 8 tables. This is the race that determines the direction that the hobby takes, regarding the venerable Aurora Thunderjet. The race has been held since 1997.

Unlike 1:24 scale tracks, HO race tracks can be small enough to fit in common basements. Therefore, most state organizations run some, if not most, of their series on home tracks as opposed to hobby shop tracks. Additionally, home tracks are often used for national competition.

HO Scale Oval racing is very popular in the Northeastern USA. The cars are molded to look like Dirt Modifieds and Sprint Cars. The Sprint Cars and Dirt Modified cars are raced on oval tracks anywhere from 8 lanes to 4 lanes.

[edit] Competition classes

HO Racing Classes

HOPRA and UFHORA run similar classes and similar rules for those classes. The following are brief explanations of some of those classes.

General rules specify the size of the car and anything else that pertains to all classes.

Superstock (HOPRA and UFHORA): Cars may have at most 4 magnets (2 to drive the motor and 2 "traction" magnets for additional downforce). All magnets must be ceramic. Motors must be stock, and may be balanced and/or trued (referred to as "hot-stock").

Modified (HOPRA): Also known as "ceramic modified" is the same as superstock above, but the motor is unrestricted and the chassis may be sanded.

Modified (UFHORA): Cars may have at most 4 magnets (2 to drive the motor and 2 "traction" magnets for additional downforce). Motor magnets must be ceramic, traction magnets may be polymer. Motor must have a resistance of no less than 3.0 Ω on each pole.

Polymer Modified (HOPRA)/Restricted Open (UFHORA): Cars may have at most 4 magnets (2 to drive the motor and 2 "traction" magnets for additional downforce). All magents may be polymer. Motor is unrestricted. Chassis may be sanded. Shunt wires may be used.

Unlimited (UFHORA and HOPRA): No restrictions. Custom chassis permitted. Six neodymium magnets are usually employed.

1:24 Racing classes Most 1:24 racing series use some variation of the USRA rules. The USRA rules have their roots in the NCC rules of 1971 which were written with the goal of making a number of under-classes in slot racing to allow more diversity in competition.

USRA Division 1:

a) Spec-15: Amateur only b) GP-12: Amateur and Expert c) International 15 (15A): Amateur and Expert d) Cobalt 12/15: Amateur and Expert e) Group 27: Amateur and Expert f) Group 7 (open): Semi-Pro and Pro There is also a class in its genesis called "One Motor Only" that is similar to Group 7 with the difference being that motor changes after tech are not allowed.

USRA Division 2: a) Group 10 Stock Car b) Production 4 1/2" Stock Car c) GTP d) GT-1 e) GT-12 f) C-12e g) Eurosport

USRA Division 3: (Proposed) a) Nostalgia Can-Am b) Vintage NASCAR c) Nostalgia F1 d) TSR e) Vintage "Thingie"

F-2000 F-2000 is raced primarily in the midwest; it is a variation of the USRA rules with the prime exception being traction/braking "glue" is not allowed to be applied to the racing surface by participants.

Fray Racing (HO Scale) - Modified Thunderjets. Rules are found here:

See the current edition of the USRA rules for technical specifications and approved parts for USRA "group" racing classes.

Other international organisations such as the IMCA have their own classifications and technical regulations. Contact the organisation directly for their latest rules and series schedule.

[edit] Current standings

ISRA 2007 World Driver Rankings

Ranked Driver Country
1 Vladimir Horky CZE
2 Petr Krcil CZE
3 Paolo Trigilio ITA
4 Jiri Karlik CZE
5 Michael Landrud SWE
6 Brian Saunders GBR
7 Josef Korec CZE
8 Piero Castricone ITA
9 Antonin Vojtik CZE
10 Tomas Rosenberg CZE
11 Andris Podosinoviks LAT
12 Guido Santarelli ITA
13 Anders Gustafson SWE
14 Nikolay Dolzhanskiy RUS
15 Paul Gawronski USA

USRA The 2007 Division 1 (Wing) Nationals (or "Nats") were held at The Track in the Gaithesburg, Maryland August 4th to August 12th. All races were run on the Euro style King track designed by Gary Gerding.

2007 Wing Car USA Nats Champions

Am Spec-15: Luka Bernadino (Brazil) Am Box-12: Alan Sulak (Texas) Expert Box-12: Mike "Erkle" Tylinski (NY) Am International 15: Kevan Taylor (Virginia) Expert International 15: Mike "Erkle" Tylinsky (NY) Am Cobalt-12: John Davis Jr. (Mid Atlantic) Expert Cobalt-12: Connie Aloise (California) One Motor Opens: Joe "Chubbie" Salzman (NY) Geezer Group 7: Richard Curnutte (California) Am Gp 27: Mike Iga (Chicago) Expert Gp 27: William Skinner (NY) Semi-Pro Group 7: Shelby Thomas (Texas) Pro Group 7: Joe "Chubbie" Salzman (NY)

The 2006 Division 2 (Scale) Nationals were held at Slot Car Raceway in Rohnert Park, CA starting on April 18 and concluding on April 23rd.

2006 Scale Nats Champions

1:32 Eurosport - Paul Gawronski AM GT-12 - Zac Grinstead Expert GT-12 - Herman James C-12 Eurosport - Paul Gawronski Am GTP - Chris Rodriguez, Jr. Expert GTP - Duran Trujillo Am GT1 - Ron Southern Expert GT1 - Paul Gawronski
Jr Group 10 NASCAR - Zac Grinstead Am Group 10 NASCAR - Zac Grinstead
Expert 4.5 NASCAR - Duran Trujillo
Expert Group 10 NASCAR - Duran Trujillo Am 4.5 NASCAR - Bill Vanderziel

The President of the USRA, Chris Radisich, is considering sanctioning a "Division 3" which will be for vintage-type or retro slot racing cars. The rules and Division 3 series are at this moment still evolving, but the purpose is to create a class where the cars raced are easily recognized and to shift away from expensive high tech componentry.

The 25th World Slot Car Championship (aka "The Worlds") was held May 17-21 2006 in Rio De Janeiro, Brazil at Top Slot Raceways. It was sanctioned by the NPRA which is a South American slot racing federation.

2006 Worlds Champions: Group 7 (open) - Joao Carlos Geraldo

[edit] See also

[edit] External links

Languages