Sharpening jig
From Wikipedia, the free encyclopedia
A sharpening jig is often used when sharpening woodworking tools. Many of the tools used in woodworking have steel blades which are sharpened to a fine edge. A cutting edge is created on the blade at the point at which two surfaces of the blade meet. To create this cutting edge a bevel is formed on the blade, usually by grinding. This bevel is subsequently refined by honing until a satisfactorily sharp edge is created.
The purpose of the sharpening jig is to hold the blade or tool at the desired angle whilst grinding or honing the bevel. In some cases, the angle of the bevel is critical to the performance of the cutting edge - a jig allows for repeatability of this angle over a number of sharpening sessions.
There are many styles of jig available commercially. Fundamentally, all jigs are similar in that they allow the user to clamp the blade or tool in some way. The jig then has some means of referencing the clamped blade to the grinding or honing apparatus so that the bevel angle is maintained. One of the more common approaches is to have the jig ride on a roller. These types of jigs are usually used with a sharpening stone or plate, such as a waterstone, oilstone or diamond plate. Other types of jigs are used to present the blade to the wheel of a grinder.
Many woodworkers prefer to learn the technique of sharpening by hand. This method does not require any jigs but does require a lot of practice to achieve satisfactory results, especially in situations where the bevel angle is critical. A sharpening jig allows a novice to achieve satisfactory results with little practice.
