Shape factor (boundary layer flow)

From Wikipedia, the free encyclopedia

See also: Shape factor

A shape factor is used in boundary layer flow to determine the nature of the flow.

H= \frac {\delta^*}{\theta}

where H is the shape factor, δ * is the displacement thickness and θ is the momentum thickness. Displacement thickness is defined as the distance that the surface would have to displace outwards in an inviscid flow in order to give the same mass flow rate deficit as that which exists in the boundary layer. Momentum thickness is defined as the distance that the wall would have to displace outwards in an inviscid flow in order to give the same momentum deficit (per unit width) of the mass flow rate.

The higher the value of H, the stronger the adverse pressure gradient. Large values of H implies that boundary layer separation is about to occur.

[edit] Further reading

  • F.M. White, "Fluid Mechanics", McGraw-Hill, 5th Edition, 2003.
  • B.R. Munson, D.F. Young and T.H. Okiishi, "Fundamentals of Fluid Mechanics", John Wiley, 4th Edition, 2002.
  • B. Massey and J. Ward-Smith, "Mechanics of Fluids", Taylor and Francis, 8th Edition, 2006.


This article about an engineering topic is a stub. You can help Wikipedia by expanding it.