Shaft mining

From Wikipedia, the free encyclopedia

'Mineshaft' redirects here. For the horse, see Mineshaft (horse).
Abandoned mine shafts in Marl, Germany.
Abandoned mine shafts in Marl, Germany.
A plan-view schematic of a mine shaft showing cage and skip compartments. Services may be housed in either of the four open compartments.
A plan-view schematic of a mine shaft showing cage and skip compartments. Services may be housed in either of the four open compartments.

Shaft mining or Shaft sinking refers to the method of excavating a vertical or near-vertical tunnel from the top down, where there is initially no access to the bottom.[1] When the top of the excavation is the ground surface, it is referred to as a shaft, when the top of the excavation is underground, it is called a winze.

Contents

[edit] Off-shaft access

The mine shaft is used to access to an underground mining facility. Horizontal workings off the shaft are called drifts, galleries or levels. These extend from the central shaft towards the ore body. The point of contact between these levels and the shaft itself is known as the inset, shaft station or plat.

[edit] Surface facilities

On the surface above the shaft stands a building known as the headframe (or winding tower, poppet head or pit head). Depending on the type of hoist used the top of the headframe will either house a hoist motor or a sheave wheel (with the hoist motor mounted on the ground). The headframe will also contain bins for storing ore being transferred to the processing facility. If the shaft is used for mine ventilaton a plenum or casing, is incorporated into the headframe to ensure the proper flow of air into and out of the mine.

[edit] Shaft lining

In North and South America, smaller shafts are designed to be rectangular with timber supports. Larger shafts are round and are concrete lined.[2]

[edit] Shaft compartments

A mine shaft is split into multiple compartments. The largest compartment is used for the cage, a conveyance used for moving workers and supplies below the surface. It functions in a similar manner to an elevator. The second compartment is the skip, used to transport ore to the surface. Smaller mining operations use a skip mounted underneath the cage, rather than a separate device. The third compartment is used for an emergency exit; it may house an auxiliary cage or a system of ladders. An additional compartment houses mine services such as high voltage cables and pipes for transfer of water, compressed air or diesel fuel.

[edit] See also

[edit] References

  1. ^ Puhakka, Tuula (editor) (1997). Underground Drilling and Loading Handbook. Tampere, Finland: Tamrock Corp., 173. 
  2. ^ De la Vergne, Jack (August 2003). Hard Rock Miner's Handbook, Edition 3. North Bay, Canada: McIntosh Engineering, 92. ISBN 0-9687006-1-6. 

[edit] External links

Industry  This industry-related article is a stub. You can help Wikipedia by expanding it.