SGI Indy

From Wikipedia, the free encyclopedia

An SGI Indy running Linux
An SGI Indy running Linux

Introduced in 1993, the Indy, code named Guinness, was the fruit of SGI's effort to muscle into the market for desktop publishing, low-end CAD, and multimedia. At the time, the market was mostly dominated by Apple. The Indy was the first computer to include a digital video camera, and was built with a (then) forward-looking architecture including an on-board ISDN adapter. With the inclusion of analog and digital I/O, SCSI, and standard composite and S-Video inputs, the Indy really was a multimedia machine.

At the beginning of its life, the Indy came standard with 16MB of RAM. IRIX 5.1, the first operating system for the Indy, did not take full advantage of the hardware due to inadequate memory management. SGI realized this and quickly increased the base specification to 32 MB, at considerable cost. Subsequent IRIX releases made huge improvements in memory usage. The latest release of IRIX available for the Indy workstations is 6.5.22.

Contents

[edit] Physical traits

The Indy packed a reasonable amount of power into a very small (41 cm × 36 cm × 8 cm), simple, and elegant package. The sturdy, electric-blue colored "pizza box" chassis is comparable to a small desktop PC from the same era, and is designed to fit underneath a large CRT monitor.

One option for the Indy was a floptical drive. The floptical used 21 MB disks, but was also able to read and write standard magnetic floppies as well.

[edit] Processors

Indy's motherboard has a socket for the Processor Module (PM). Early Indys used the 100 MHz MIPS R4000 CPU, which quickly proved inadequate. The Indy, at the bottom of SGI's price list, thus became the primary platform for MIPS's low-cost, low-power-consumption R4600 CPU series. The R4600 had impressive integer performance, but had poor floating-point capability. This, however, wasn't too huge of a problem in a box that was generally not designed for floating-point-intensive applications. For this reason, the R4600 made an appearance outside the Indy line just once, and only briefly, in the SGI Indigo2. This series of CPU issues, along with the relatively low-powered graphics boards, lower maximum RAM amount, and relative lack of internal expansion ability compared to the SGI Indigo led to the Indy being pejoratively described amongst industry insiders as "An Indigo without the 'go'."

The R4600 chip itself has no L2 cache controller, external controller was used to add 512K of L2 cache. R4600s processor modules both with an L2 cache (SC) and without (PC) are common in the Indy. At the same clock rate, the SC version of the processor module is generally 20 to 40 percent faster than the PC version, due to the memory cache.

The Indy was also the first SGI to utilize the MIPS R5000 CPU, which offered significant advantages over the R4400 and R4600 it replaced. The Indy's 180 MHz R5000 module can be overclocked to 200 MHz by replacing its crystal oscillator chip.

[edit] Graphics

Three graphics subsystems were available for the Indy: 8-bit XL, 24-bit XL, and 24-bit XZ. Each supported a maximum resolution of 1280 × 1024 at a refresh rate of 76 Hz, and had a 13W3 monitor connection. Graphics options were connected to the system using a GIO32bis bus.

[edit] 8-bit XL

Also known as Newport graphics based on the REX3 chipset, these were designed for general 2D X11 applications; no hardware 3D acceleration was included. This was the first accelerator to demonstrate object-based antialiasing and sub-pixel exact Bresenham lines. These worked best for 2D CAD or general office use.

[edit] 24-bit XL (XGE)

Using an identical circuit board as the 8-bit XL, the 24-bit XL included three times as much framebuffer memory to accommodate 24-bit color. A popular choice for some general graphics work, since its 2D performance is better than the XZ card.

In an Indy with an R5000 CPU, these graphics options are called XGE, because an R5000 CPU can perform 3D geometry calculations faster than the XZ subsystems's four Geometry Engines--as a result, all 3D is done in software. XZ graphics were rarely paired with the R5000 for this reason.

[edit] XZ

These graphics were a port of the Indigo²'s XZ (Elan) graphics into Indy - they offered very good non-textured 3D performance at the time, sacrificing a bit of 2D performance in return. The XZ graphics option was not widely used in Indy systems that used the R5000 CPU. This was mostly due to extensions of the MIPS instruction set that were implemented in the R5000. With the new instructions, the R5000 CPU could perform coordinate transformations faster than the XZ graphics board. Because XZ graphics only provided assistance to the main CPU for coordinate transformations, 3D rendering was often faster when implemented only in software. However, using XZ to perform coordinate transforms does free the CPU to perform other rendering-related calculations. These graphics take the form of two boards, one on top of the other, and block both GIO option slots.

[edit] Video

The Indy was the first SGI to have video inputs by default. Each and every Indy has a composite, S-Video, and digital video input built into the motherboard, which collectively are known as "Vino" (video input, no output) video. None of them are of professional quality, but are still usable. The digital input is a proprietary D-sub connector with a rectangular array of pins, and is used by the SGI IndyCam. The connector is the same as serial ports on Cisco routers, however is electrically different.

The maximum supported input resolution is 640x480 (NTSC) or 768x576 (PAL). It takes a fast machine to capture at either of these resolutions, though; an Indy with slower R4600PC CPU, for example, may require the input resolution to be reduced before storage or processing. However, the Vino hardware is capable of DMAing video fields directly into the framebuffer with minimal CPU overhead.

None of the Indys support a video output by default - that would require the Indy Video GIO32 card. On top of that, there is an optional module called CosmoCompress, which offers on-the-fly JPEG video compression and decompression and uses up another GIO32 slot.

[edit] Drives

The Indy has two drive bays for 1-inch tall 3.5" drives. The upper drive bay is externally accessible and may hold a SCSI floptical drive. All external and internal drives share a single Fast SCSI bus (unless a GIO32 SCSI card has been installed).

[edit] CD-ROM

External CD-ROM drive connect via SCSI connector at rear side of the box. Typical drive supports boot, OS install, audio. Special ROM is required to boot from for certain device types. [1] A small number of CD-ROM drives have the firmware needed to do audio over SCSI.

[edit] Networking

All Indys shipped with AUI/10BASE-T Ethernet and ISDN as standard equipment. The Ethernet ports are half-duplex only. The 10BaseT port takes precedence over the AUI port - if the system detects a carrier on both ports, it will use the 10Base-T.

Two different manufacturers produced 100BASE-TX Ethernet cards compatible with the Indy, both of which attached to the system using the GIO32 bus. Set Engineering produced one such fast ethernet card, based on the Texas Instruments ThunderLAN chipset, under contract with SGI. Phobos also produced models of fast ethernet cards for the Indy (the G100 and G130).

The ISDN port provided on the Indy has no NT1. An external NT1 is required to use the ISDN port in North America.

[edit] SGI Challenge S

SGI Challenge S in a rack
SGI Challenge S in a rack

SGI released a variant of the Indy for low-end server usage. The SGI Challenge S has an identical case as the Indy (except for the name badge), and featured a nearly identical motherboard as the Indy, but without any graphics or sound hardware.[1] Interestingly, there are still volume control buttons on the front of the Challenge S, but they are not attached to anything. The Challenge S comes with an ISDN port standard. Also included is a 10Mbps AUI Ethernet port. All local administration is performed by serial console to one of the two DIN-8 serial ports (either one can be used to reach the PROM prompt and uses the same pin-out found on Macintosh modem/printer ports).

[edit] Continued use

The component of the Indy most prone to failure is the Nidec/Power General power supply. New power supplies are manufactured by Sony and sold through resellers, however they are expensive.

The Indy's Ethernet address, which doubles as the system's serial number, is stored in battery-backed RAM. This means that when the internal battery dies, so does the system - it will hang at the PROM monitor and refuse to boot any further as a result of the Ethernet address being reset to FF:FF:FF:FF:FF:FF (expressed in hexadecimal). A competent user can replace the PROM battery and reprogram it. The original battery was made by Dallas Semiconductor, now a division of Maxim Integrated Products. The original unit was marked the "DS-1386-8K-150", however its replacement unit, the "DS-1386-8K-120" can be directly substituted with no ill effects.

One can set a new MAC address from the Command Monitor with the command "setenv -f eaddr xx:xx:xx:xx:xx:xx". The -f switch here will force the new MAC address. The MAC address is (usually) on a sticker to the rear of the unit, and hence can be reprogrammed without losing software licences, which often rely on it to verify ownership. Otherwise, any MAC address in SGI's block is usable.

(Originally based upon Alex's SGI page (PageMirror), public domain as of September 7, 2003)

[edit] External links

[edit] References

  1. ^ SGIstuff - Challenge S