Set-top box
From Wikipedia, the free encyclopedia
 |
It has been suggested that Cable converter box be merged into this article or section. (Discuss) |
A set-top box (STB) or set-top unit (STU) is a device that connects to a television and an external source of signal, turning the signal into content which is then displayed on the television screen.
Contents |
[edit] History
Before the All-Channel Receiver Act of 1962 required US television receivers be able to tune the entire VHF and UHF range (which in North America was NTSC-M channels 2 through 83 on 54 to 890 MHz), a set-top box known as a UHF converter would be installed at the receiver to shift a portion of the UHF-TV spectrum onto low-VHF channels for viewing. As some 1960s-era twelve-channel TV sets remained in use for many years, and Canada and Mexico were slower than the US to require UHF tuners to be factory-installed in new TV's, a market for these converters continued to exist for much of the 1970s.
Cable television represented a possible alternative to deployment of UHF converters as broadcasts could be frequency-shifted to VHF channels at the cable head-end instead of the final viewing location. Unfortunately, cable brought a new problem; most cable systems could not accommodate the full 54-890 MHz VHF/UHF frequency range and the twelve channels of VHF space were quickly exhausted on most systems. Adding any additional channels therefore needed to be done by inserting the extra signals into cable systems on non-standard frequencies, typically either below VHF channel 7 (midband) or directly above VHF channel 13 (superband).
These frequencies corresponded to non-television services (such as two-way radio) over-the-air and were therefore not on standard TV receivers. Before cable-ready TV sets became common in the late 1980s, a set-top box known as a cable converter box was needed to receive the additional analog cable TV channels and convert them to frequencies that could be seen on a regular TV. These boxes often provided a wired or wireless remote control which could be used to shift one selected channel to a low-VHF frequency (most often channels 3 or 2) for viewing. Block conversion of the entire affected frequency band onto UHF, while less common, was used by some models to provide full VCR compatibility and the ability to drive multiple TV sets, albeit with a somewhat non-standard channel numbering scheme.
Newer television receivers greatly reduced the need for external set-top boxes, although cable converter boxes continue to be used to descramble premium cable channels and to receive digital cable channels, along with using interactive services like video on demand, pay per view, and home shopping through television. Satellite and microwave-based services also require specific external receiver hardware, so the use of set-top boxes of various formats never completely disappeared.
[edit] Digital television
Special digital set-top boxes are available for receiving digital television broadcasts on TV sets that do not have a built in digital tuner. In the case of direct broadcast satellite (mini-dish) systems such as SES Astra, Dish Network, or DirecTV, the set-top box is an integrated receiver/decoder (or IRD).
In the United Kingdom, digital set-top boxes (often referred to as digiboxes, after Sky Digital's trademark for their unit) are usually for digital terrestrial television through services such as Freeview, a service operated by the Freeview Consortium, or through digital satellite with BSkyB and also with digital cable. They are used to access television as well as audio and interactive services through the "Red Button" promoted by broadcasters such as the BBC with BBCi or Sky with Sky Active. Current Freeview set-top boxes and digital televisions are not capable of decoding the protocol DVB-T2 that terrestrial High-definition will use in 2009, so viewers will need to purchase an HD receiver when the time comes.
In Australia set-top boxes are the principal means of receiving digital terrestrial broadcasts as comparably few television sets have in-built digital tuners. The Foxtel set-top boxes (including the Foxtel iQ unit) are also used to receive subscription television from Foxtel. For HDTV receiving they are using Beyonwiz manufactured media centers which came to market at March of 2007.
In the United States, deployment of a very basic coupon-eligible converter box is supported through a $40 federal subsidy to encourage viewers of over-the-air television to adopt ATSC standards ahead of the planned DTV transition and shutdown of full-power analog broadcasts (by Feburary 17, 2009). These boxes are not as readily available in Canada and Mexico, where broadcasters are not yet required to transition to digital television, although ATSC-capable tuners are appearing in some new TV's and other television-related products such as computer video capture cards and DVD recorders in those nations.
Globally, some boxes also have a built-in digital video recorder (or DVR) which often utilises the electronic programme guide scheduling data and records content to an internal hard drive.
[edit] Many TV signal sources
The signal source might be an ethernet cable , a satellite dish, a coaxial cable (see cable television), a telephone line (including DSL connections), Broadband over Power Line, or even an ordinary VHF or UHF antenna. Content, in this context, could mean any or all of video, audio, Internet webpages, interactive games, or other possibilities.
[edit] IPTV
In IPTV networks, the set-top box is a small computer providing two-way communications on an IP network, and decoding the video streaming media. IP set-top boxes have a built in home network interface which can be Ethernet or one of the existing wire home networking technologies such as HomePNA.
[edit] Ambiguities in the definition
With the advent of flat panel televisions set-top boxes are now deeper in profile than the tops of most modern TV sets. Because of this set-top boxes are often placed beneath televisions and the term set-top box has become something of a misnomer.
A set-top box does not necessarily contain a tuner of its own. A box connected to a television (or VCR) set's SCART connector is fed with the baseband television signal from the set's tuner, and can ask the television to display the returned processed signal instead.
This SCART feature had been used for connection to analogue decoding equipment by Pay TV operators in Europe, and in the past was used for connection to teletext equipment before the decoders became built-in. The outgoing signal could be of the same nature as the incoming signal, or RGB component video, or even an "insert" over the original signal, thanks to the "fast switching" feature of SCART.
In case of analogue pay-TV, this approach avoided the need for a second remote control. The use of digital television signals in more modern pay-TV schemes requires that decoding take place before the digital-to-analogue conversion step, rendering the video outputs of an analogue SCART connector no longer suitable for interconnection to decryption hardware. Standards such as DVB's Common Interface and ATSC's CableCARD therefore use a PCMCIA-like card inserted as part of the digital signal path as their alternative to a tuner-equipped set-top box.
[edit] Software quality
As complexity of the set-top box increases, the software quality practices of the industry become obvious and many systems have bugs, which may force the user to disconnect the box physically for 30 seconds and then restart it. [1]
[edit] See also
Related Technologies:
- ATSC tuner
- Audio
- Cable modem
- Connectivity: RS-232, USB, Bluetooth and Wi-Fi
- Digital television adapter (DTA)
- DOCSIS
- DVB
- Free-to-air
- Integrated Services Digital Broadcasting
- Interactive television
- IPTV
- QAM tuner
- QPSK
- Satellite dish
- Symbol rate
- Cable Converter Box
- Media extender, Digital media receiver or HDD media player
[edit] References
- ^ The Chimera of Software Quality. 080322 computer.org
[edit] External links
- The Freedom Box, a STB with Free Software: www.freedombox.tv
|
|||||||||||||||||||||||||||||||||||||||
