Semovente da 149/40

From Wikipedia, the free encyclopedia

Semovente 149/40
Semovente da 149/40 displayed in the US Army Ordnance Museum.
Type	Self-propelled gun
Place of origin	Italy
Production history
Designer	Ansaldo

Semovente da 149/40 was an Italian self-propelled artillery piece. Only a single unit was built; this vehicle is displayed in the US Army Ordnance Museum, Aberdeen, Maryland.

[edit] History

The Italian Army was not far behind the Germans in realizing the need for assault guns and developed a string of vehicles that outwardly resembled the StuG III. These Italian assault guns were produced in appreciable numbers for they were better armored and quicker to produce than the contemporary Italian tanks. But by the time significant numbers had been issued, Italy was effectively out of the war, and most of these guns fell into German hands. The majority of these semovente were armed with 75mm and 105mm guns and howitzers, but were mostly direct fire weapons. The Italian artillery arm still needed self-propelled artillery weapons to support the armored formations.

Ansaldo therefore diverted some of its development facilities to design a powerful artillery weapon that could be carried on a trucked chassis. In the end, Ansaldo settled on an existing weapon, the Canone da 149/40 modello 35 and placed it on a much modified Carro Armato M15/42 tank chassis. The selection of these two pieces of equipment was made in order to produce as good a carriage/weapon combination as possible. The snag however was that the Italian army was already crying out for large numbers of both the gun and tank and Italian industry could not keep up with the demand. This new weapon, the Semovente da 149/40 got off to a shaky start.

The Semovente da 149/40 was a completely unprotected weapon as the long gun barrel was placed on an open mounting carried on the turretless tank chassis. The gun crew stood in the open to serve the gun that had is trunnions mounted right to the rear to absorb some of the recoil forces produced on firing. It was late 1942 before the first prototype was ready for prolonged firing trials, but even before these were over unsuccessful attempts were being made to start production. Before the lines could start rolling the Italians surrendered to the Allies and the Germans took over what was left of the Italian economy. Thus the Semovente da 149/40 prototype remained the sole example of what seemed to be a promising design. The Canone da 149/40 modello 35 could fire a 101.4lb (46kg) shell to a range of 25,919 yards (23,700m), at which distance the lack of protection for the gun crew would have been of relatively little importance.

Italian armoured fighting vehicles of World War II
Light Tanks and Tankettes
L3/35 | Fiat L6/40
Medium Tanks
Fiat M11/39 | Fiat M13/40 | Fiat M14/41 | M15/42
Heavy Tanks
P40
Armoured Cars
AB 40 | AB 41 | Lince scout car
Self propelled guns
Semovente 47/32 | Semovente 75/18 | Semovente 75/34 | Semovente 90/53 | Semovente 105/25 | Semovente 149/40
Italian armoured fighting vehicle production during World War II