Safety valve

From Wikipedia, the free encyclopedia

 This article needs additional citations for verification.
Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (May 2007)
Oxygen Safety Valve
Oxygen Safety Valve
ND250-Safety Valves
ND250-Safety Valves

A safety valve is a valve mechanism for the automatic release of a gas from a boiler, pressure vessel, or other system when the pressure or temperature exceeds preset limits. It is part of a bigger set named Pressure Safety Valves (PSV) or Pressure Relief Valves (PRV). The other parts of the set are named relief valves, safety relief valves, pilot-operated safety relief valves, low pressure safety valves, vacuum pressure safety valves.

Safety valves were first used on steam boilers during the industrial revolution. Early boilers without them were prone to accidental explosion when the operator allowed the pressure to become too high, either deliberately or through incompetence.

Contents

[edit] Function and design

Proportional-Safety Valve
Proportional-Safety Valve

The earliest and simplest safety valve used a weight to hold the pressure of the steam, (this design is still commonly used on pressure cookers); however, these were easily tampered with or accidentally released. On the Stockton and Darlington Railway, the safety valve tended to go off when the engine hit a bump in the track. A valve less sensitive to sudden accelerations used a spring to contain the steam pressure, but these (based on Salter spring balances) could still be screwed down to increase the pressure beyond design limits. This dangerous practice was sometimes used to marginally increase performance of a steam engine. In 1856 John Ramsbottom invented a tamper-proof spring safety valve which became universal on railways.

Safety valves also evolved to protect equipment such as pressure vessels (fired or not) and heat exchangers. Safety valve term should be limited to compressible fluid application (gas, vapor, steam).

The two general types of protection encountered in industry are thermal protection and flow protection.

For liquid-packed vessels, thermal relief valves are generally characterized by the relatively small size of the safety valve necessary to provide protection from excess pressure caused by thermal expansion. In this case a small valve is adequate because most liquids are nearly incompressible, and so a relatively small amount of fluid discharged through the relief valve will produce a substantial reduction in pressure.

Flow protection is characterized by safety valves that are considerably larger than those mounted in thermal protection. They are generally sized for use in situations where significant quantities of gas or high volumes of liquid must be quickly discharged in order to protect the integrity of the vessel or pipeline.

[edit] Legal and code requirements in industry

 This article or section needs to be wikified to meet Wikipedia's quality standards.
Please help improve this article with relevant internal links. (November 2007)

In the petroleum refining, petrochemical and chemical manufacturing, natural gas processing and power generation industries, the term safety valve is associated with the terms pressure relief valve (PRV), pressure safety valve (PSV) and relief valve.

The generic term is or Pressure Relief Valve (PRV) or Pressure Safety Valve (PSV)

Relief Valve (RV): automatic system that relief by static pressure on a liquid. It specifically open proportionally with pressure increasing.

Safety Valve (SV): automatic system that relief by static pressure on a gas. It specifically open almost straight to full lift after a pop sound.

Safety Relief Valve (SRV): automatic system that relief by static pressure on both gas and liquid.

Pilot-Operated Safety Relief Valve (POSRV): automatic system that relief by remote command from a pilot on which the static pressure (from equipment to protect) is connected.

Low Pressure Safety Valve (LPSV): automatic system that relief by static pressure on a gas. The pressure is small and near the atmospheric pressure.

Vacuum Pressure Safety Valve (VPSV): automatic system that relief by static pressure on a gas. The pressure is small, negative and near the atmospheric pressure.

Low and Vacuum Pressure Safety Valve (LVPSV): automatic system that relief by static pressure on a gas. The pressure is small, negative or positive and near the atmospheric pressure.

RV, SV and SRV are spring operated (even said spring loaded). LPSV and VPSV are spring operated or weight loaded.

In most countries, industries are legally required to protect pressure vessels and other equipment by using relief valves. Also in most countries, equipment design codes such as those provided by the ASME, API and other organizations like ISO (ISO 4126) must be complied with and those codes include design standards for relief valves.[1][2]

The main standards, laws or directives are:

  • ASME (American Society of Mechanical Engineers) Boiler & Pressure Vessel Code, Section VIII, Division 1
  • API (American Petroleum Institute) Recommended Practice 520 and API Standard 526, API Standard 2000 (low pressure -Storage tank)
  • ISO 4126 (originated from from European Union directives)
  • EN 764-7 (from CEN - European Committee for Standardization - originate from European Union directives)
  • AD Merckblatt (German)
  • PED 97/23/EC (Pressure Equipment Directive - European Union)

[edit] Water heaters

Temperature and Pressure safety valve on a water heater.
Temperature and Pressure safety valve on a water heater.

They are required on water heaters, where they prevent disaster in certain configurations in the event a thermostat should fail. There are still occasional, spectacular failures of older water heaters that lack this equipment. Houses can be levelled by the force of the blast.[3]

[edit] Pressure cookers

Pressure cookers are pots for cooking with a pressure proof lid. Cooking at pressure allows the temperature to rise above the boiling point of water (100 degrees Celsius at sea level ) which speeds up the cooking and makes the cooking more thorough.

Pressure cookers usually have two safety valves. One in a hole upon which a weight sits. The other is a sealed rubber grommet which is ejected in a controlled explosion if the first valve gets blocked.

The term safety valve is also used metaphorically.

[edit] See also

[edit] External links

Safety Valves Why are safety valves required? What different types are available and how are they selected, sized and installed? - Spirax Sarco


The main manufacturers of pressure safety valves are:

[edit] References

  1. ^ List of countries accepting the ASME Boiler & Pressure Vessel Code
  2. ^ API 5210-1, Sizing and Selection of Pressure-Relieving Devices
  3. ^ Elaine Porterfield, Paul Shukovsky, and Lewis Kamb (Saturday, July 28, 2001). Four hurt as water heater explodes. seatlepi.nwsource.com, Retrieved on Saturday, May 12, 2007