ROMP
From Wikipedia, the free encyclopedia
 |
This article or section needs sources or references that appear in reliable, third-party publications. Primary sources and sources affiliated with the subject of the article are generally not sufficient for a Wikipedia article. Please include more appropriate citations from reliable sources, or discuss the issue on the talk page. This article has been tagged since January 2008. |
The ROMP or Research (Office Products Division) Micro Processor chip, also known in some circles as 032, was first in silicon in 1981 and was originally designed to be used in office products. It was intended as a follow-on to a mid-1970's processor called the "OPD Mini Processor", which was used in text editing systems such as the IBM Office System/6 and DisplayWriter. ROMP originally was shipped in the IBM RT/PC line, announced in 1986, and was later used in an IBM laser printer. For a time the IBM RT/PC was planned to be a personal computer, with ROMP replacing the Intel 8088. However, the software was targeted more towards engineering workstations.
The original ROMP had a 24-bit Reduced Instruction Set Computer (RISC) architecture developed by IBM, but the instruction set was changed to 32 bits a few years into the development. It was originally implemented in a 2 micron NMOS technology. It had sixteen 32-bit general purpose registers and used 32 bit addresses and data paths. The microprocessor was controlled by 118 simple 2 and 4 byte instructions. Internal processor organization enabled the CPU to execute most register-to-register instructions in a single cycle. An IBM-developed advanced memory management chip provided virtual memory address translation functions and memory control.
The architectural work started in late spring of 1977, as a spin-off of the T.J. Watson Research 801 processor (hence the "Research" in the acronym). Most of the architectural changes were for cost reductions, such as adding 16 bit instructions for byte-efficiency - a main concern at the time. For embedded systems, this is still a concern; both ARM and MIPS have added 16-bit instructions to their architectures, which were originally 32-bit only.
The first chips were ready in early 1981. Thus, ROMP was possibly the first working commercial RISC, depending on whether or not it was a true RISC and whether or not one could count it as a commercial product in 1981, since it didn't actually ship until 1986. This delay was caused by overly ambitious software plans for the RT/PC and its operating system (OS). This OS virtualized the hardware and could host multiple other operating systems, though UNIX was the only operating system to be ported to the underlying virtual OS. The IBM RT/PC consequently fell behind competitors such as Sun Microsystems and Apollo Computer who ported Unix directly to their platforms.
