Talk:Reflectivity
From Wikipedia, the free encyclopedia
Contents |
[edit] water reflectance
Should the following be added? If so, where?
That part of incident light that is reflected from a body of water is specular and is calculated by the Fresnel equations. Fresnel reflection is directional and therefore does not contribute significantly to albedo which is primarily diffuse reflection. A graph showing the reflectivity of water vs. incident angle of can be seen at[1].
A real water surface may be wavy. Reflectance assuming a flat surface as given by the Fresnel equations can be adjusted to account for waviness. A formula and graph for correction for waviness for two different wave energy spectrum definitions exists. [1] 4.232.0.81 02:39, 11 August 2006 (UTC)
[edit] Reflectance
This is currently the Reflectivity and Reflectance article -- it should say so right at the top.-69.87.202.60 11:49, 17 May 2007 (UTC)
I am inclined to delete this entire section and replace it with a more accurate definition of reflectance, unless somebody can provide a reference for where this definition of reflectance originates. Bulk reflectivity is not called reflectance any more than thin film reflectance is called reflectivity. They are two fundamentally different, albeit related quantities. In any case, I will provide the proper optical/physical definition of reflectivity and reflectance. —Preceding unsigned comment added by Nanoguitar (talk • contribs) 20:17, 28 May 2008 (UTC)
[edit] metal mirrors
Reflectance vs. wavelength curves for aluminium (Al), silver (Ag), and gold (Au) metal mirrors
This is a nice graph; might be nice to also have it in the mirror article. It would be of more general use if the bounds of visible light could be added.-69.87.202.60 11:52, 17 May 2007 (UTC)
[edit] data needed
This article is a good theoretical start, but needs a lot more real-world data.
Please add typical range of total visible-light reflectivity for ordinary mirrors (80%?), white paper (up to at least 90%?), other ordinary white surfaces, and ordinary black surfaces. And spectral curves for all of those, too, from UV to IR, with the visible portion clearly marked.
And, links to great sources of such details.-69.87.202.60 11:59, 17 May 2007 (UTC)
[edit] Human eye
This seems to be the pure physics term/concept. In dealing with light, much of the terminology is weighted by the response of the human eye to different colors (Lumens, for example). What is the term for reflectance, weighted in the visible spectrum by the human visual response? It should be at least mentioned in this article, and linked to.-69.87.204.232 11:26, 19 May 2007 (UTC)
- Photopic spectral responsivity (cf. Color vision#Physiology of color perception) --Adoniscik (talk) 00:19, 7 February 2008 (UTC)
[edit] Reflectance Table
- Colors
- 70-80% White
- 70-80% Light cream
- 55-65% Light yellow
- 45-50% Light green
- 45-50% Pink
- 40-45% Sky-blue
- 40-45% Light grey
- 25-35% Beige
- 25-35% Yellow ocher
- 25-35% Light brown
- 25-35% Olive green
- 20-25% Orange
- 20-25% Vermilion red
- 20-25% Medium grey
- 10-15% Dark green
- 10-15% Dark blue
- 10-15% Dark red
- 10-15% Dark grey
- Materials
- 95% Mirror
- 80% Plaster
- 65-75% White enamel
- 60-75% Glazed white tiles
- 60% Maple
- 60% Birch
- 40% Light oak
- 15-20% Dark oak
- 15-20% Dark walnut
- 15-40% Concrete
- 5-25% Red brick
- 2-10% Carbon-black
- 6-8% Clear glass
- Lighting design
- 60-90% Ideal Ceilings
- 35-60% Ideal Walls
- 30-50% Ideal Countertops
-69.87.203.133 01:04, 25 May 2007 (UTC)
[edit] Broken link
Link (1) is broken. 128.12.103.70 (talk) 15:45, 14 December 2007 (UTC)
[edit] Reflectivity units
I think the unit(s) of reflectivity must be mentioned. --Sylvestersteele (talk) 12:02, 10 February 2008 (UTC)