Reflector (cipher machine)

From Wikipedia, the free encyclopedia

A reflector, in cryptology, is a component of some rotor cipher machines, such as the Enigma machine, that sends electrical impulses that have reached it from the machine's rotors, back in reverse order through those rotors.

The scrambling action of the Enigma rotors shown for two consecutive letters — current is passed into set of rotors, around the reflector, and back out through the rotors again. Note: The greyed-out lines represent other possible circuits within each rotor, which are hard-wired to contacts on each rotor. Letter A encrypts differently with consecutive key presses, first to G, and then to C. This is because the right hand rotor has stepped, sending the signal on a completely different route.
The scrambling action of the Enigma rotors shown for two consecutive letters — current is passed into set of rotors, around the reflector, and back out through the rotors again. Note: The greyed-out lines represent other possible circuits within each rotor, which are hard-wired to contacts on each rotor. Letter A encrypts differently with consecutive key presses, first to G, and then to C. This is because the right hand rotor has stepped, sending the signal on a completely different route.

[edit] Other names

The reflector is also known as the reversing drum or, from the German, the Umkehrwalze or UKW.