Rake (theatre)
From Wikipedia, the free encyclopedia
English theatre stages in the Middle Ages and early Modern era typically sloped upwards away from the audience. This is known as a "rake" or "raked stage" and improves the view for the audience.
The slope of the rake is measured by the number of horizontal units it takes for one vertical unit measured in the direction of the slope. A rake of one horizontal unit to one vertical unit (1 in 1), would give an angle of 45° from the horizontal. Rakes of '1 in 18' to '1 in 48' were more common. Modern stages are constructed with no slope, and the majority of existing raked stages have been renovated into unraked arrangements.
Theaters constructed after the beginning of the 20th century feature a raked audience section. This change back to the method of construction seen in Greek and Roman theaters, (flat stage and terraced audience) was effected due the difficulty encountered when one tries to walk across a sloped surface, which had resulted in unnatural movement patterns to avoid the appearance of limping caused by the non-level surface.
On a raked stage an actor who is farther from the audience is higher than an actor who is closer to the audience. This led to the theatre positions "upstage" and "downstage," meaning, respectively, farther from or closer to the audience.
The practice of "upstaging" other actors comes from the practice of moving to a more elevated position on the rake, causing the upstaged actor to turn his back to the audience to address the case member. Rakes are rarely used in theatre today, and the term "upstaging" has since taken on the figurative meaning of an actor unscrupulously drawing the audience's attention away from another actor.
