Pyrotechnic star
From Wikipedia, the free encyclopedia
Pyrotechnic stars are pellets or simply pieces of pyrotechnic composition which may contain metal powders, salts or other compounds that, when ignited, burn a certain colour or exude a spark effect. They are a part of all projectile type fireworks. The most common is the aerial shell. When you watch this firework, it will launch into the sky, burning a lifting charge. Once the shell has attained proper altitude, due to other mechanisms within the firework, it will ignite the stars.
[edit] Procedure
Stars are either rolled, pumped or cut.
Rolled stars are small cores of a hard material which are coated in a cement mixer. First some water is sprayed on cores. Then an amount of a pyrotechnic composition is dropped into the mixer. These two steps are repeated, and the stars will grow bigger and bigger into a spherical shape.
Pumped stars are stars that have been pumped using a star pump. A dampened composition is put in the star pump and is pressed against a flat surface and ejected again creating cylinder shaped stars.
Cut stars is a dampened composition spread out to an even layer on a flat surface. The stars are then cut into cubes.
The stars are allowed to dry for some days before being put into the fireworks piece.
Priming the stars is often necessary because they may be hard to ignite. Priming consists of coating the surface of the star with a more easily ignited substance, such as black powder.
Certain examples of compounds commonly used in fireworks, and the colours they burn are listed in the pyrotechnic colorant article.
[edit] Putting Into Use
Stars can be used in aerial shells, roman candles, star mines, and certain bottle rockets. When used in aerial shells the stars sometimes may be required to be "Coated" or "Spiked" with black powder or sometimes a small amount of flash powder. This is usually done if the star compostion does not ignite easily. Or sometimes flash powder might be "pumped" in with the star to make it burn faster for certain effects.