POMZ

From Wikipedia, the free encyclopedia

POMZ-2M mine, showing a potential bobby trap configuration.
POMZ-2M mine, showing a potential bobby trap configuration.
POMZ-2 mine, showing detail of the mine and various fuze configurations.
POMZ-2 mine, showing detail of the mine and various fuze configurations.

The POMZ, POMZ-2 and POMZ-2M (ПОМЗ, ПОМЗ-2, ПОМЗ-2М) are three types of Russian-made stake mounted anti-personnel fragmentation mine. The POMZ mine was used during the Second World War. It was superseded by the POMZ-2, and later by the improved POMZ-2M. These mines (and copies thereof) have been used in numerous conflicts, including the Vietnam War and the Korean War.

Contents

[edit] Description

The mines consist of a small TNT explosive charge inside a hollow cylindrical-cast iron fragmentation sleeve. The sleeve has large fragments cast into the outside and is open at the bottom to accept the insertion of a wooden or plastic mounting stake. On top is a weather cap, covering a standardised fuse well, which in operation is normally armed with an MUV or VPF tripwire fuse.

The POMZ-2M has a threaded fuse well, while the earlier POMZ-2 was unthreaded and the fuse and igniter would sometimes fall out if the mine was disturbed. The POMZ-2 has 6 rows of square performed fragments, while the POMZ-2M has 5 rows and is slightly shorter.

The crude fragmentation jacket produces an uneven fragmentation effect. The effective radius of the mine is often quoted as four meters, but a small number of large fragments may be lethal at ranges far exceeding that.

The wooden stakes tend to rot in tropical climates, leaving the mine, if armed, in an extremely unpredictable state.

[edit] Variants

Yugoslav PMR-2A variant of POMZ anti-personnel mine, Balkans 1996
Yugoslav PMR-2A variant of POMZ anti-personnel mine, Balkans 1996

Being of simple construction, these mines have been widely copied, including non-standardised patterns informal guerilla workshops. Some mass produced copies:

[edit] Specification

These specifications of a POMZ-2 and POMZ-2M are typical for their various copies

POMZ-2 POMZ-2M
Diameter 60 mm
Height of case 130 mm 107 mm
Height of stake ~300 mm but easily varied
Weight 2.3 kg 1.8 kg
Charge 75 g rod of cast TNT
Fuse MUV series tripwire
(2 to 5 kg pull)

[edit] Packaging

The POMZ 2M comes packed in a rectangular wooden box which has a clamp in each corner to lock on the lid. It holds eight mine bodies, eight stakes, eight 75g charges and eight MUV series fuses complete with detonators.

[edit] See also

[edit] References