Picton-Battersby Line
From Wikipedia, the free encyclopedia
| Picton-Battersby Line | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The Picton-Battersby Line was a section of line running from Picton, North Yorkshire on what is now the Northallerton-Eaglescliffe Line, to Battersby on what is now the Esk Valley Line.
Contents |
[edit] History
[edit] Construction
The line was constructed by the North Yorkshire & Cleveland Railway (NY&C) between Picton (on the Leeds Northern's 1852 route between Northallerton and Stockton) and Grosmont. It was opened in 1857 from Picton to Stokesley, with intermediate stations at Trenholme Bar, Potto and Sexhow. The line included a two mile branch south from Potto to the mines at Whorlton.
The NY&C was incorporated into the North Eastern Railway (NER) in 1858, the same year the Rosedale Branch Line for the Rosedale mines was purchased from private owners and began conversion from narrow gauge to standard gauge. It was left to NER to finish the line to Grosmont via Battersby. This and the link line to Nunthorpe were completed in stages to 1865.
[edit] Stations
There were seven stations on the Picton-Battersby section of the NY&C.
- Picton
- Picton is the station at which the line met the Leeds Northern's route between Northallerton and Stockton, which is now the Northallerton-Eaglescliffe Line. The station has since closed, but the stationmaster's house still survives.
- Trenholme Bar
- One of the original stations upon opening in 1857, the station closed along with passenger traffic in 1954.
- Potto
- Serving the village of Potto, the station served from 1857 to 1954. It was also the last station before the branch to Whorlton mines, receiving two daily shipments of ironstone. The station building still survives.
- Sexhow
- Served the village of Sexhow from 1857 to 1954. The station building still survives.
- Stokesley
- The last of the original stations opened in 1857, Stokesley closed in 1954 along with the rest of the passenger traffic. Closed to freight in 1965. The station building still survives, after being well restored by a firm of architects. Stokesley station featured comprehensively in the BTF production "A farmer moves south" and is therefore one of the best documented of the closed rural stations. The film is available from the usual sources.
- Ingleby
- This station served the village of Ingleby from 1858 to 1954. The station building remains.
- Battersby
- Originally called Ingleby Junction in 1858, then Battersby Junction from 1878, before finally becoming Battersby in 1893, the station is the only one on the P-B line to remain in use, as part of the modern Esk Valley Line.
[edit] Closure
When the freight from the mines ceased, the passenger services along the Picton-Battersby and Esk Valley lines still remained important to the region, despite competition along the coast lines, with seven weekday trains along the line between Teesside and Whitby in 1900. However, this dropped to four in 1922 and by 1954 it was only two. Passenger services were withdrawn on 14 June 1954, with goods traffic ending west of Stokesley in 1958. Freight traffic remained between Stokesley and Battersby until 1965, when it too ceased, and the line dropped completely out of use.
Battersby station (originally Ingleby Junction, later Battersby Junction in 1878, and its current name from 1893) and the line to Grosmont remain as part of the Esk Valley Line.
[edit] References
- Suggitt, G. (2005). Lost Railways of North & East Yorkshire: Countryside Books. ISBN 1-85306-918-3
