Image:PCB design and realisation smt and through hole.png
From Wikipedia, the free encyclopedia
Size of this preview: 800 × 427 pixels
Full resolution (3,000 × 1,600 pixels, file size: 2.74 MB, MIME type: image/png)
| This is a file from the Wikimedia Commons. The description on its description page there is shown below.
|
| Description |
en: This picture shows (left) a printed circuit board (PCB) layout, created on a computer and (right) the manufactured board, populated with parts. Both through-hole and surface mounts components have been used; the board is double-sided, with through-hole plating, green solder resist, white solder paste (visible on unsoldered holes, such as the four corner mounting holes and the nine holes down the right hand side of the board) and white silkscreen printing. |
||
|---|---|---|---|
| Source |
Photographed by User:Mike1024 |
||
| Date |
02 February 2007 |
||
| Author |
User Mike1024 |
||
| Permission (Reusing this image) |
|
||
| Other versions | None. |
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 19:10, 2 February 2007 | 3,000×1,600 (2.74 MB) | Mike1024 | ({{Information| |Description=This picture shows (left) a printed circuit board (PCB) layout, created on a computer and (right) the manufactured board, populated with parts. Both through-hole and surface mounts components have been used; the board is double) |
