Packard Hawk
From Wikipedia, the free encyclopedia
The 1958 Packard Hawk was the sportiest of the four Packard-badged Studebakers produced in the final year of Packard production,. Packard's plant in Detroit, Michigan had been leased to Curtiss-Wright (and would be soon sold to them), and Packard models in this dying-gasp year were all rebadged and retrimmed Studebaker products. The 1958 Packard Hawk was essentially Studebaker's 1957 Golden Hawk 400 with a fibreglas front end and a modified deck lid.
Instead of the Studebaker Hawk's upright Mercedes-style grille, the Packard Hawk had a wide, low opening just above the front bumper and covering the whole width of the car. Above this, a smoothly sloping nose, and hood--reminiscent of the 1953 Studebakers, but with a bulge as on the Golden Hawk--accommodated the engine's McCulloch supercharger that gave the Studebaker 289 in³ (4.7 L) V8 a total of 275 bhp (205 kW). At the rear, the sides of the fins were coated in metallized PET film, giving them a shiny metallic gold appearance. A fake spare-tire bulge adorned the 1953-53-style Studebaker deck lid. 'PACKARD' was spelled out in capitals across the nose, with a gold 'Packard' emblem in script--along with a Hawk badge--on the trunk lid and fins.
The interior was full leather, with a fully instrumentation in an engine-turned dash. As on early aircraft and custom boats, padded armrests were mounted outside the windows, a rare touch.
The styling was definitely controversial, often described as 'vacuum-cleaner' or 'catfish' by detractors. Interestingly, the styling has come to be appreciated today than in its debut. Only 558 were sold, with Packard's impending demise a likely contributing factor. Most were equipped with the Borg-Warner three-speed automatic transmission. Approximately 28 were produced with the B-W T85 3-speed w/overdrive manual transmission. Studebaker-Packard was the first manufacturer to popularize the limited-slip differential, which they termed Twin-Traction. Most Packard Hawks came with TT. It was certainly the fastest Packard ever sold, since it shared the majority of its components with Studebaker's Golden Hawk. The price was $3995, about $700 higher than the Studebaker model, but with a more luxurious interior. Electric window-lifts and power seats were optional extras.
Its rarity and status as the best-regarded of the 'Packardbaker' final-year cars have made the Packard Hawk quite collectible. Values are roughly double those of the equivalent Studebaker, although they are still low by comparison with Corvettes and Thunderbirds. Because a Studebaker drivetrain was used, mechanical parts are more readily available, although body and trim parts are more difficult-to-impossible to find. While it is a unique car, current restoration costs almost always exceed the selling price.
ENGINE
Type: Cast iron 90° V8, Silver Light dish-type pistons
Displacement: 289 cubic inches
Bore X stroke: 3.56 X 3.63 inches
Compression ratio: 7.5:1
Power @ rpm: 275 hp (205 kW) @ 4,800 RPM
Torque @ rpm: 333 lb-ft @ 3,200 RPM
Valvetrain: In-head valves, solid lifters
Main bearings: 5
Ignition: Delco-Remy breaker-point
Fuel system: 2-bbl Stromberg 380475 downdraft carburetor, McCulloch supercharger, 5 p.s.i. max
Lubrication system: Full-pressure, gear-driven
Electrical system: 12-volt, 30 amperes
Exhaust system: Cast iron, dual exhaust
TRANSMISSION
Type: Borg-Warner Flightomatic automatic
Ratios: 1st: 2.40:1
2nd: 1.47:1
3rd: 1.0:1
Reverse: 2.0:1
'
DIFFERENTIAL
Type: Semi-floating hypoid, Twin-Traction Spicer-Thornton limited slip
Ratio: 3.31:1
STEERING
Type: Power assist, Saginaw recirculating ball
Ratio: 19.2:1
Turns, lock-to-lock: 4.5
Turning circle: 41 feet'
BRAKES
Type: Four wheel, power-assist Wagner hydraulic
Front: Cast-iron finned drum, 11 X 2.5 inches
Rear: Cast-iron drum, 10 X 2 inches
Swept area: 172.8 square inches
CHASSIS & BODY
Construction: All-steel, box section, double-drop side rails, 5 crossmembers
Body style: Two-door, five passenger hardtop
Layout: Front engine, rear-wheel drive'
SUSPENSION
Front: Individual unequal-length upper and lower control arms, coil springs, hydraulic shocks, anti-sway bar
Rear: Live axle, semi-elliptic leaf springs, hydraulic shocks
WHEELS & TIRES
Wheels: Kelsey-Hays tubeless 5-lug stamped steel
Front/rear: 5.5 X 14 inches
Tires: Classic bias-ply
Front/rear: 8.00 X 14 inches
WEIGHTS & MEASURES
Wheelbase: 120.5 inches
Overall length: 205.2 inches
Overall width: 71.3 inches
Overall height: 54.6 inches
Front track: 56.7 inches
Rear track: 55.7 inches
Shipping weight: 3,470 pounds'
CAPACITIES
Crankcase: 5 quarts
Cooling system: 17 quarts[vague]
Fuel tank: 18 gallons[vague]
Transmission: 19 pints[vague]'
CALCULATED DATA
Bhp per c.i.d.: 1.06
Weight per bhp: 12.62 pounds
Weight per c.i.d.: 11.88 pounds'
PERFORMANCE
0-60 mph: 12.0 seconds
¼ mile ET: 16.7 seconds @ 82.3 mph
Top speed: 125 mph
Fuel mileage: 12 mpg city, 20 mpg highway
PRODUCTION
1958 Packard Hawk: 588
| Studebaker-Packard Hawk series | (edit) | ||
| Studebaker: | Golden Hawk - Sky Hawk - Power Hawk - Flight Hawk - Silver Hawk - Hawk - GT Hawk | ||
| Packard: | Hawk | ||
|
|||||||||||||||||
