Pacific tool company

From Wikipedia, the free encyclopedia

Pacific Tool Company

Type	Private
Founded	1920's
Dissolved	1992
Headquarters	Grand Island, United States
Area served	California, Nebraska
Industry	Reloaders
Products	Shotshell and Rifle Presses
Parent	Pacific Gun Sight Co.
Website	http://pacificreloaders.awardspace.com

Pacific Tool Company was a major reloading company in the 1950s to 1990's. A lot of these reloaders show up on the market because they are built to last and are very dependable. Although these reloaders have not been manufactured since 1992, they are still highly sought after products.

[edit] History

The Pacific Tool Company started off as the Pacific Gunsight Company, which opened its doors in the early 1920’s at 353 Hays St, San Francisco, Calififornia. In 1953 they moved to 2901 El Camino Real, Palo Alto, Calif. Pacific was then sold to R.R. Deitemeyer of DL Products Co., maker of Deitemeyer shotshell loaders. The tool colors changed to blue with the move from California to P.O. Box 4495 Lincoln, Nebraska in 1960. While in Lincoln, Pacific tools were made by Bair Machine Company until there was a parting of the ways in 1969. This resulted in Bair offering the same Pacific tools under their own name. In 1972 the company name was changed to Pacific Tool Company while the address remained the same. In 1974 came another change, the address was moved to P.O. Drawer 2048, Ordnance Plant Rd., Grand Island, Nebraska. Pacific was now a part of Hornady. This resulted in the color change to red seen most often in the fourth generation reloaders. By 1992 the Pacific name had been dropped as Hornady began offering reloading tools under its own name. For more information about Pacific reloaders, visit http://pacificreloaders.awardspace.com

[edit] Generation One

[edit] Pacific DL-100

Produced in the 1950s, this Pacific reloader came into production while being produced under Deitemeyer Products Co. The DL included in every reloader's name stands for Deitemeyer Loader. The DL-100 is a single stage reloader in the shape of a half moon. The DL-100 can be equipped with a taper-loc die, crimp starting die, die sets for 12, 12 Mag, 20, 20 Mag, 16, 28, 40, 410, and an automatic primer feeder. The DL-100 does not use regular shot and powder bushings found on most Pacific reloaders, but charge bars similar to an MEC with both shot and powder holes pre-drilled into the bar with designated powder types and shot weight already assigned. For reloading instructions, visit http://pacificreloaders.awardspace.com/Pacific%20DL-100.htm

Pacific DL-100

[edit] Pacific DL-200

The Pacific DL-200 was also another Pacific - Deitemeyer reloader. Deitemeyer reloaders can also be found to look like the DL-200 but in a bright red color. The DL-200 is a single stage reloader in a straight line press. The DL-200 can resize shells, and features separate shot and powder charge bars. For reloading instructions, visit http://pacificreloaders.awardspace.com/Pacific%20DL-200.htm

Pacific DL-200

[edit] Pacific DL-300

Pacifics first progressive reloader, the DL-300 offers a faster reloading method. Instead of moving a single case throughout the different stages individually, the DL-300 lets the operator move all eight cases at once, performing the operations at the same time. The DL-300 is recognizable by the base casting with the four bolt holes sticking out from the reloader. For reloading instructions, visit http://pacificreloaders.awardspace.com/Pacific%20300.htm

Pacific DL-300

[edit] Generation Two

[edit] Pacific DL-110

The DL-110 has been designed for the hunter and novice reloader. Simplicity, ease of operation, safety and economy are built into this loader. The DL-110 was the base model for the second generation. The DL-110 does not resize the shell and is recognizable from its counterpart the DL-120 by the lack of a wad guide in the middle of the base casting. Generation two is the first to use powder and shot bushings. For reloading instructions, visit http://pacificreloaders.awardspace.com/Pacific%20DL-110.htm

Pacific DL-110

[edit] Pacific DL-150

The Dl-150, although old, is still by today's standards a well built press. Recognizable by its blue paint, this reloader's design was later incorporated into the DL-155. The DL-150 features a resizing die, but no automatic primer feed. For reloading instructions, visit http://pacificreloaders.awardspace.com/Pacific%20DL-150.htm

Pacific DL-150

[edit] Pacific DL-250

A straight line single stage press, the DL-250 was the forefather of the DL-260 and the DL-266. The straight line makes single stage reloading easier and faster for those who need more speed, but not as much as a progressive reloader. For reloading instructions, visit http://pacificreloaders.awardspace.com/Pacific%20DL-250.htm

Pacific DL-250

[edit] Pacific DL-350

Built on the same base casting at the DL-250, the DL-350 was the next generation of progressive reloaders offered by Pacific. For reloading information visit http://pacificreloaders.awardspace.com/Pacific%20350.htm

Pacific DL-350

[edit] Pacific DL-500

Pacifics one and only hydraulic powered press. The DL-500 offered the easy of the progressive press with the automatic power of the hydraulic pump. The hydraulic pump was included with the reloader, and are a rare treat to find. For reloading information, visit http://pacificreloaders.awardspace.com/Pacific%20500.htm

Pacific DL-500

[edit] Third Generation

[edit] Pacific DL-120

The DL-120 has been designed for the hunter and novice reloader. Simplicity, ease of operation, safety and economy are built into this loader. The DL-120 is basically a modified DL-110 with an added wad guide post. Some models can be seen with an offset handle. For reloading information, visit http://pacificreloaders.awardspace.com/Pacific%20DL-120.htm

Pacific DL-120

[edit] Pacific DL-260

The DL-260 is basically a modified DL-250 with an added wad guide post very similar to the one on the DL-120. For reloading information, visit http://pacificreloaders.awardspace.com/Pacific%20DL-260.htm

Pacific DL-260

[edit] Pacific DL-360

The DL-360 is a basically a modified DL-350. You still must rotate the shell plate. The DL-360 can also be modified to accept a hydraulic unit to power the press. For reloading information, visit http://pacificreloaders.awardspace.com/Pacific%20360.htm

Pacific DL-360

[edit] Fourth Generation

[edit] Pacific DL-105

The final generation of reloaders, the DL-105 was designed for the cheaper hunter and novice reloader. It is a simple press, but still can turn out good looking shells. The press can resize the shells, but not very effectively. There is no primer feeder available for this reloader. For reloading information, visit http://pacificreloaders.awardspace.com/Pacific%20DL-105.htm

Pacific DL-105

[edit] Pacific DL-155

A modified DL-150, this press can be seen in both blue and red. A very effective single stage press capable of producing very good looking shells. An automatic primer feeder (APF) can be added to the unit to increase productivity. For reloading information, visit http://pacificreloaders.awardspace.com/Pacific%20DL-155.htm

Pacific DL-155

[edit] Pacific DL-266

The grand daddy of all single stage presses. This straight line give the user ease of use combined with high quality reloads. This press can also be seen in both blue and red colors. For reloading information, visit http://pacificreloaders.awardspace.com/Pacific%20DL-266.htm

Pacific DL-266

[edit] Pacific DL-366

The final progressive press Pacific manufactured before Hornady took the name and made it its own reloader. This reloader can still be purchased for Hornady as the DL-366. This press can be seen in both blue and red colors and feature either a swing out wad guide or a stationary one depending on the year the reloader was manufactured. For reloading information, visit http://pacificreloaders.awardspace.com/Pacific%20366.htm