Ostomy pouching system

From Wikipedia, the free encyclopedia

An ostomy pouching system (also colloquially and incorrectly called a colostomy bag) is a medical prosthetic that provides a means for the collection of waste from a diverted biological system (colon, ileum, urinary); pouching systems are most commonly associated with colostomies, ileostomies, and urostomies.

Pouching systems usually consist of a mounting plate, commonly called a wafer, and a collection pouch that is mechanically attached in an airtight seal. Ostomy pouching systems collect waste that is output from a stoma. The pouching system allows the stoma to drain into a sealed collection pouch, while protecting the surrounding skin from contamination. Pouching systems come in one- and two-piece designs; two-piece designs allow the changing and use of multiple pouches while retaining the wafer for several days. The selection of systems varies greatly between individuals and is often based on personal preference and lifestyle.

Ostomy pouching systems are air- and water-tight and allow the wearer to lead an active normal lifestyle that can include all forms of sports and recreation.

Ostomy pouching systems are also sometimes referred to as an appliance, where the term appliance refers to a prosthesis, as a mechanical replacement for a biological function.

Contents

[edit] Wafers

A typical ostomy wafer.
A typical ostomy wafer.

Most wafers are manufactured using pectin or similar organic material and are available in a wide variety of sizes to accommodate a person's particular anatomy. The internal opening must be the correct size to accommodate the individual's stoma while protecting the skin from contact with waste. The methods for sizing this opening varies depending on the type of wafer; some pre-cut sizes are available, however most users need to customize openings using scissors. Manufacturers have recently introduced moldable wafers than can be shaped by hand without the need for scissors.

Wafers are usually attached to the skin with a "peel and stick" adhesive backing. This skin-friendly adhesive is very strong and durable, and provides a water-tight seal between the skin and the wafer. A wafer typically lasts between 4 to 10 days before it needs to be replaced; this is highly dependent on the individual's lifestyle, ostomy type, and anatomy.

[edit] Pouches

A typical ostomy pouch, in this case a closed-end or  "disposable". Note the flange ring, which uses a "Tupperware" type of seal.
A typical ostomy pouch, in this case a closed-end or "disposable". Note the flange ring, which uses a "Tupperware" type of seal.

The method of attachment to the wafer varies between manufactures and includes permanent (one-piece), press-on ("Tupperware" type), turning locking rings and the recently introduced "sticky" adhesive mounts. The two-piece arrangement allows pouches to be swapped without removing the wafer; for example, some people prefer to temporarily switch to a "mini-pouch" for swimming or other activities.

Pouches can be broken down into two basic types: open-end (drainable) and closed-end (disposable).

  • Open-end pouches have a resealable end that can be opened to drain the contents of the pouch into a toilet. The end is traditionally sealed with a plastic clip, however many manufacturers now offer a velcro-type closure at the end that eliminates the need for the clip.
  • Closed-end pouches must be removed and replaced with a new pouch.

The use of open-end vs. closed-end pouches is dependent on the frequency in which an individual needs to empty the contents, as well as economics.

Gas is created during digestion, and an airtight pouch will collect this and inflate. To prevent this some pouch styles are available with special charcoal filtered vents that will allow the gas to escape.

[edit] Sources

[edit] See also

[edit] Major Manufacturers