Oil immersion
From Wikipedia, the free encyclopedia
In light microscopy, oil immersion is a technique used to increase the resolution of a microscope. This is achieved by immersing both the objective lens and the specimen in a transparent oil of high refractive index, thereby increasing the numerical aperture of the objective lens.
Immersion oils are transparent oils that have specific optical and viscosity characteristics necessary for use in microscopy. An oil immersion objective is an objective lens specially designed to be used in this way. Many condensers also give optimal resolution when the condenser lens is immersed in oil.
Contents |
[edit] Theoretical background
The resolution of a microscope is defined as the minimum separation needed between two objects under examination in order for the microscope to discern them as separate objects. This minimum distance is labelled δ. If two objects are separated by a distance shorter than δ, they will appear as a single object in the microscope.
A measure of the resolving power of a lens is given by its numerical aperture, NA:
where λ is the wavelength of light. From this it is clear that a good resolution (small δ) is connected with a high numerical aperture.
The numerical aperture of a lens is defined as
- NA = nsinα0
where α0 is the angle spanned by the objective lens seen from the sample, and n is the refractive index of the medium between the lens and specimen (≈1 for air).
State of the art objectives can have a numerical aperture of up to 0.95. Because sin α0 is always less than or equal to unity, the numerical aperture can never be greater than unity for an objective lens in air. If the space between the objective lens and the specimen is filled with oil however, the numerical aperture can obtain values greater than unity. This is because oil has a refractive index greater than 1.
[edit] Oil immersion objectives
From the above it is understood that oil between the specimen and the objective lens improves the resolving power by a factor 1/n. Objectives specifically designed for this purpose are known as oil immersion objectives.
Oil immersion objectives are used only at very large magnifications that require high resolving power. Objectives with high power magnification have short focal lengths, facilitating the use of oil. The oil is applied to the specimen (conventional microscope), and the stage is raised, immersing the objective in oil. (In inverted microscopes the oil is applied to the objective).
The refractive indices of the oil and of the glass in the first lens element are nearly the same, which means that the refraction of light will be small upon entering the lens (the oil and glass are optically very similar). Oil immersion objectives are designed with this in mind, and can not be used without oil, because in this case there will be much refraction of light at the glass/air interface, drastically changing the path of light entering the lens and making it impossible to achieve focus. Using the oil immersion objective with oil can only be done on fixed specimens.
In addition to improving resolution, the use of oil is also advantageous in that it reduces the reflective losses as light enters the lens (again because the oil and glass are optically alike).
[edit] Oil immersion and the condenser
 |
Please help improve this section by expanding it. Further information might be found on the talk page or at requests for expansion. (January 2008) |
[edit] Immersion oil
|
|
Please help improve this section by expanding it. Further information might be found on the talk page or at requests for expansion. (January 2008) |
Cedar tree oil, has an index of refraction of approximately 1.516. The numerical aperture of cedar tree oil objectives is generally around 1.3. In modern microscopy, synthetic immersion oils are more commonly used. NA values of 1.6 can be achieved with different oils.
[edit] See also
[edit] References
- Practical Microscopy by L.C. Martin and B.K. Johnson , Glasgow (1966).
- Light Microscopy by J.K. Solberg, Tapir Trykk (2000).
[edit] External links
- "Microscope Objectives: Immersion Media" by Mortimer Abramowitz and Michael W. Davidson, Olympus Microscopy Resource Center (website), 2002.
- "Immersion Oil Microscopy" by David B. Fankhauser, Biology at University of Cincinnati, Clermont College (website), December 30, 2004.
- "History of Oil Immersion Lenses" by Jim Solliday, Southwest Museum of Engineering, Communications, and Computation (website), 2007.
- "Immersion Oil and the Microscope" by John J. Cargille, New York Microscopical Society Yearbook, 1964 (revised, 1985). (Archived at Cargille Labs (website).)
