Obturating ring
From Wikipedia, the free encyclopedia
An obturating ring is a ring of relatively soft material designed to obturate under pressure to form a seal. Obturating rings are often found in artillery and other ballistics applications, and similar devices are also used in other applications such as plumbing, like the olive in a compression fitting.
[edit] Ballistics uses
Obturating rings are common in artillery, where the hard steel casing of the shell is too hard to practically deform to provide a tight seal for the propelland gasses. An obturating ring or driving band made of a softer material is the typical solution. mortar bombs also use obturating rings to provide a seal around the projectile. Recoilless rifles and some artillery use rings with a reverse impression of the rifling cut in them for a tighter seal even at very low pressures.
Some artillery shells use an obturating ring at the rear of the shell to provide a tight seal for the breech. This allows a mostly caseless ammunition without the sealing issues generally encountered in such ammunition. The obturating ring provides the sealing that would normally be provided by a cartridge case.
[edit] References
- Atmos 2000 155mm Self-Propelled Artillery System, Israel, which uses an obturating ring for a breech seal
- 81 mm mortar shell information, showing the obturating ring