Obelisk building technology in ancient Egypt

From Wikipedia, the free encyclopedia

 Please help improve this article or section by expanding it.
Further information might be found on the talk page or at requests for expansion. (June 2008)
This article or section needs sources or references that appear in reliable, third-party publications.
Primary sources and sources affiliated with the subject of the article are generally not sufficient for a Wikipedia article. Please include more appropriate citations from reliable sources, or discuss the issue on the talk page.
This article has been tagged since June 2008.
This article does not cite any references or sources. (June 2008)
Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed.
Modern Egyptian shows the use of Dolerite balls as carving tools for granite, at Aswan
Modern Egyptian shows the use of Dolerite balls as carving tools for granite, at Aswan

Obelisk making technology in ancient Egypt is an archaeological matter that is quite well understood today. Ancient Egyptian Obelisks are tapering stone pillars which have a square cross-section, were used for ornamental purposes in temples and had religious connotations. They were generally made from granite coming from well-known quarries located near the banks of the Nile, mainly in the region of Aswan. In a quarry in this area, the northern quarry which is now an open-air museum, there is the famous unfinished obelisk of huge proportions. It has been partially carved out of the rock, but its bottom face is still attached to the ground. When it cracked, unsuccessful attempts were made to salvage some of the effort by carving a smaller obelisk from it. It is only crudely carved, marks are left which hint to the technology employed in its extraction.

Contents

[edit] The carving procedure

Tip of the unfinished obelisk with marks that show clearly the use of Dolerite balls as carving tools
Tip of the unfinished obelisk with marks that show clearly the use of Dolerite balls as carving tools
Symmetrical marks at the quarry of the unfinished obelisk showing the perforation to be filled with wood in order to detach the stone pieces from the bed
Symmetrical marks at the quarry of the unfinished obelisk showing the perforation to be filled with wood in order to detach the stone pieces from the bed

The carving was done on granite directly on the surface of the stone at the ground, by cutting four sides. It is now known that the tools employed for carving the granite were small balls of Dolerite that is a mineral harder than granite. Once the sides were cut off, the process of separating the stone piece from the ground was a bit more complicated but very trivial. A series of perforations were made, again using Dolerite-made tools. These perforations were then filled with wood and these wood pieces were water saturated. The small pieces of wood expanded with the humidity breaking the separations between successive perforations and then effectively separating the carved piece from its bed. Many residues left at the rock beds and measuring nearly the size of many of the famous obelisks (for example the Cleopatra's Needles) are now known to exist at the Unfinished Obelisk open air museum.

[edit] The transportation

The obelisks were conveniently made at quarries situated in the banks of the Nile so that the heavy weight structures were easily transported by navigating the river in specially built ships that cruised at the flooding days when the river was more deep. This seems to be a very difficult task to perform but the engineers at the time managed perfectly well without modern machinery or steel cranes.

[edit] Raising obelisks

[edit] External links

 This article about Egyptology or subjects relating to ancient Egypt is a stub. You can help Wikipedia by expanding it.
v • d • e
Ancient Egypt topics
All the Giza pyramids

bob rules