Newton 6 inch Mortar

From Wikipedia, the free encyclopedia

Newton 6 inch Mortar

Canadian troops firing the 6-inch (152.4 mm) Mortar in the open at Valenciennes in 1918
Type medium mortar
Place of origin Flag of the United Kingdom United Kingdom
Service history
In service 1917 - 1918
Used by British Empire
Flag of the United States United States
Wars World War I
Production history
Designer Captain H Newton, 5th Btn Sherwood Foresters
Designed 1916
Specifications
Barrel length 54 inches (1.372 m) bore, 57 inches (1.448 m) barrel total.[1]

Shell HE 52 pounds (23.59 kg)[2]
Calibre 6 inches (152.4 mm)
Elevation 77°–45°
Rate of fire 6 rounds/min
Effective range 100 yards (91 m) - 1,420 yards (1,300 m)
Filling Amatol, Ammonal or Sabulite
Filling weight 22 pounds (9.98 kg)

The Newton 6 inch Mortar was the standard British medium mortar in World War I from early 1917 onwards.

Contents

[edit] Description

The Newton 6 inch replaced the 2 inch Medium Mortar beginning in February 1917.

It was a simple smooth bore muzzle-loading (SBML) mortar consisting of a 57-inch (1,448 mm) one-piece steel tube barrel, with a "striker stud" inside the centre of the closed base of the tube. The rounded external base of the tube sat in a socket in the flat cast steel base, which in turn sat on a wooden platform. An "elevating guy" (cable) connected to a loop in the upper side of the barrel and the rear end of the bed. "Traversing guys" (cables) connected to loops on each side of the barrel and eyebolts on the upper sides of the bed. Hence aiming of the barrel was done by adjusting the length of the guys via adjusting screws. A socket in the barrel base allowed for emergency firing via a "misfire plug" in the case of misfires (i.e. if the bomb remained in the barrel due to failure of the propellant to ignite).[3]

[edit] Combat service

Loading bomb in typical trench emplacement, Mesopotamia 1918
Loading bomb in typical trench emplacement, Mesopotamia 1918

British Empire Divisions were initially equipped with 3 batteries of 4 mortars designated X, Y, Z. From February 1918 onwards these were consolidated into 2 batteries, X and Y, of 6 mortars each, and Z was dissolved. In British use they were operated by the Royal Field Artillery and formed part of the Divisional Artillery with 1 battery attached to each of the Divisional artillery brigades.

The United States Army began production and equipping with this mortar late in the war but it is doubtful whether any were used in combat.

3rd Australian Medium Trench Mortar Battery in action, Ville-sur-Ancre, Somme, 29 May 1918
3rd Australian Medium Trench Mortar Battery in action, Ville-sur-Ancre, Somme, 29 May 1918

The mortar was operated from concealed pits close to the front line during trench warfare, and was used in the open during the final "mobile warfare" phase of the First World War, as demonstrated in the photograph, depending on available transport. The disassembled weapon was usually transported on horsedrawn carts but the Canadian Automobile Machine Gun Brigade (the Canadian Independent Force or "Brutinel's Brigade") is known to have successfully used the mortar both mounted on motor trucks and dismounted in the closing months of the war.[4][5]

The 52-pound cast-iron fin-stabilised high explosive bomb carried the percussion primer at the base in the intersection of the 4 vanes (fins), consisting of a specially loaded blank .303 rifle cartridge. The basic propellant charges were contained in 4 small white cambric bags each containing 1 oz of guncotton yarn. These were held in place in the 4 angles between the bomb's fins. For ranges less than 1000 yards 1 or more bags could be removed, as per range tables.

For ranges above 1,000 yards (910 m), additional charges were loaded before the bomb, held in 2 white cambric bags each containing 1 oz 4 drm cordite.[6]

In action the gunners would adjust the angle of the barrel via the elevating guy (for distance) and traversing guys (for direction). The manual warns: "See that the elevating and traversing screws of the guys are always tight. A slack guy leads to inaccurate shooting, and the stresses on firing are not equally distributed; this is usually the cause of the guys breaking".[7]

The range tables specified the barrel angle and propellant charges required. The additional cordite propelling charge bags were dropped down the barrel if necessary, or necessary number of propellant charges removed from the bomb, and the bomb's fuze was set. The gunners stood back, the bomb was dropped down the barrel, the detonator in the base of the .303 cartridge in the base of the bomb struck a pin in the bottom of the barrel and fired, igniting the guncotton charges in the base of the bomb, which in turn ignited the cordite charges if present. The resulting rapid gas expansion propelled the bomb up the barrel and to its target.

[edit] Range tables

52 lb Bomb, ML 6 inch Trench Mortar.
Propellant : 1-4 one ounce guncotton charges in the base of the bomb, plus optional 2.5 oz cordite charge.[8]

Range
(yards)
1 oz charge
degrees
2 oz charge
degrees
3 oz charge
degrees
4 oz charge
degrees
4 oz + 2.5 oz cordite
degrees seconds
100 77
120 74
140 71
160 67.5
180 63.5
200 59
220 47.5 77.25
226 45




240
76



260
74.75



280
73.25



300
72



320
70.5 77.5


340
69 76.75


360
67.5 76


380
66 75


400
64.25 74.25


420
62.25 73.25


440
60.25 72.25 77.25

460
57.75 71.5 76.5

480
55 70.5 76

500
50.5 69.5 75.25

510
45



520

68.5 74.5

540

67.5 74

560

66.25 73.25

580

65.25 72.5

600

64 72

620

62.75 71.25

640

61.25 70.5

660

59.75 69.75

680

58.25 69

700

56.5 68.25 75.25 23.9
720

54.5 67.5 74.75 23.9
740

51.75 66.75 74.25 23.8
760

45.5 65.75 73.75 23.8
761

45


780


65 73.25 23.7
800


64 72.75 23.6
820


63.25 72.25 23.6
840


62.25 71.75 23.5
860


61 71.25 23.4
880


60 70.75 23.4
900


58.75 70.25 23.3
920


57.5 69.75 23.2
940


56 69.25 23.1
960


54.5 68.75 23.1
980


52.5 68.25 23.0
1000


50 67.5 22.9
1016


45

1020



67 22.8
1040



66.5 22.7
1060



66 22.6
1080



65.25 22.5
1100



64.5 22.8
1120



64 22.2
1140



63.25 22.1
1160



62.75 22.0
1180



62 21.8
1200



61.25 21.7
1220



60.5 21.5
1240



59.5 21.3
1260 58.75 21.1
1280 57.75 20.9
1300 56.75 20.7
1320 55.75 20.4
1340 54.75 20.2
1360 53.5 19.9
1380 52 19.5
1400 50 19.0
1420 45 17.5

[edit] Photo gallery

[edit] See also

Wikimedia Commons has media related to:

[edit] Surviving examples

[edit] Notes

  1. ^ Preliminary Notes on the M.L. 6-Inch Trench Mortar Mark I. 1917
  2. ^ 52 lb total weight for bomb is quoted in Range Tables. Preliminary Notes on the M L 6-inch Trench Mortar, Mark I. Handbook of the M L 6-inch Trench Mortar Mark I.
  3. ^ Preliminary Notes on the M.L. 6-Inch Trench Mortar, Mark I, 1917, page 1
  4. ^ Michael Holden, University of New Brunswick, "Training, Multi-National Formations, and Tactical Efficiency: The Canadian Motor Machine Gun Brigades in 1918"
  5. ^ Danish Military History Society, "The Canadian Motor Machine Gun Brigade, Part 1"
  6. ^ Handbook of the M.L. 6-Inch Trench Mortar Mark I. 1918
  7. ^ Handbook of the M.L. 6-Inch Trench Mortar Mark I. 1918, page 10
  8. ^ Preliminary Notes, 1917

[edit] References

[edit] External links

British Empire weapons of the First World War