Navy Mark V
From Wikipedia, the free encyclopedia
The Navy Mark V high-altitude pressure suit was a full-body pressure suit developed by the B.F. Goodrich Company and the U.S. Navy for wear in high-altitude fighter aircraft operations. It is best known for its role as the "Mercury Spacesuit" worn for all manned Project Mercury spaceflights.
Contents |
[edit] Pre-Mercury development
The suit was designed by Russell Colley (who designed and built the high-altitude pressure suit worn by aviator Wiley Post) as a means of providing an Earth-like atmosphere in the primitive, unpressurized high-altitude fighter jets developed by the U.S. Air Force and U.S. Navy after the Korean War. Prior to the development of the Mark V suit, the Navy developed different type of the Mark-series full-pressure suits, but all suits had problems with both mobility and weight.
The Mark V suit solved the mobility problems with the use of elastic cord which arrested the "ballooning" of the suit, and at 22 lb., was the lightest pressure suit developed for military use. The suit was first introduced in the late 1950s, but with the advent of pressurized cockpits, and the David Clark Company's contract with the U.S. Air Force and the National Advisory Committee for Aeronautics (later NASA) for a full pressure suit for the X-15 rocket plane, the suit fell out of use.
[edit] Project Mercury
When NASA started the Mercury Project in 1958, one of the first needs the newly formed agency needed was a pressure suit to protect the astronaut from a sudden depressurization in the cabin while in the vacuum of space. To solve the problem, NASA tested both the Navy Mark V and the X-15 high-altitude suit and decided that the Navy Mark V suit proved satisfactory for the role, mainly because it had less bulk than the David Clark suit, and that it could be easily modified for the new space role.
Unlike the military Mark V suit, the Mercury suit incorporated several changes:
- The "open loop" system was replaced with a "closed loop" system, eliminating the rubber diaphragm around the wearer's face. Oxygen entered the suit through a hose connected at the wearer's waist, circulated through the suit to provide cooling, and exited through a hose on the right side of the helmet, or through the face opening depending on whether the faceplate was closed or open. A small pressure bottle connected by a small hose to a connector next to the astronaut's left jaw was used to pressurize a pneumatic seal when the faceplate was closed.
- The replacement of the dark gray nylon outer shell with one made of aluminum-coated nylon, for thermal control purposes.
- The replacement of the black leather safety boots with ones made first from white coated leather, later aluminum-coated nylon leather. This again was for thermal control.
- Introduction of straps and zippers to provide a snug fit, along with refinements in the shoulder, elbow, and knee retaining cords.
- Special gloves with four curved fingers for grasping the controls, with the middle finger made straight for pushing buttons and flipping toggle switches. (In the book We Seven, the astronauts pointed out that the special design of the gloves allowed them to avoid the use of a so-called "Swizzle Stick" for the button pushing and switch throwing.)
- A "biomed" flap on the right thigh for the connection of biomedical connections to the spacecraft's telemetry systems.
Each astronaut had three pressure suits; one for training, one for flight, and another as a backup. All three suits cost $20,000 USD total and unlike the military Mark V suits, had to be individually tailored for each astronaut. No Mercury pressure suit failed during launch, although an uncapped ventilation inlet valve almost led to the drowning of astronaut Gus Grissom, at the end of the MR-4 mission the capsule hatch blew off while in the Atlantic Ocean, forcing Grissom to make an emergency exit from the ship without securing his suit for the recovery operations. Most complaints that arose during the Mercury program was that the astronauts were uncomfortable due to faulty thermostats, raising the suit temperature to uncomfortable levels.
[edit] Later modifications
Since the launching of MR-3 in May, 1961, the Mercury pressure suit underwent several changes to incorporate improvements, mainly for comfort, and also for mobility. These changes included:
- Incorporation of wrist bearings and ring locks on the sleeves starting with Grissom's MR-4 suit. Alan Shepard's MR-3 suit had gloves that were zippered onto the suit itself, preventing the astronaut from easily rotating his wrists to control the spacecraft's controllers.
- Incorporation of a urine collection device starting with the MR-4 suit--Shepard, going through long countdown delays had to urinate into the heavy cotton underwear in his suit because the German rocket engineers felt a UCD was not needed because the flight itself was to last only 15 minutes.
- Incorporation of a convex mirror, dubbed the "Hero Medal," on the chest of the astronauts so that the same onboard camera used to record the astronaut could also cover the instrument panel, eliminating the weight of a separate camera which had been used for this purpose on MR-3. This was eliminated beginning with MA-8.
- After the near drowning of astronaut Gus Grissom during recovery operations after the MR-4 a small inflatable life vest was worn on the astronaut's chest.
In preparation for the final Mercury mission, flown by Gordon Cooper, the suit underwent the most modifications, most notably the replacement of the leather boots with ones incorporated directly into the suit. Other changes were made in the shoulder construction, along with the pressure helmet. A new mechanical seal for the faceplate eliminated the need for the small pressure bottle and hose, and incorporated new microphones and an oral thermometer, the latter eliminated the rectal thermometer used on prior flights. Cooper's wore neither the convex mirror or the life vest. Shepard, who was Cooper's backup, had an identical flight and backup suit for the mission, and was to wear the modified suit for the cancelled MA-10 flight. MA-9 was the last fight of the Mercury pressure suit.
[edit] Later use
After Mercury, the pressure suit was used for the early development phases for the Gemini Program, but because of the success of the X-15 high altitude pressure suit, along with the need to develop a suit for Extra Vehicular Activity outside of the spacecraft, the Mercury suit was phased out of service and replaced with a Gemini version of the X-15 suit. Since then, NASA has used either the David Clark Company, ILC Dover, and Hamilton Sundstrand for all pressure and spacesuit needs. B.F. Goodrich would only be used after Mercury for the production of the landing gear tires for the Space Shuttle, but this has since been done by Michelin.
[edit] See also
|
|||||||||||||||||||
