Murexide

From Wikipedia, the free encyclopedia

Murexide
IUPAC name Ammonium 2,6-dioxo-5-[(2,4,6-trioxo-5-hexahydropyrimidinylidene)amino]-3H-pyrimidin-4-olate
Identifiers
CAS number [3051-09-0],
[6032-80-0] (hydrate)
PubChem 18275
SMILES C1(=C(NC(=O)NC1=O)[O-])N=C2C(=O)NC(=O)NC2=O.[NH4+]
Properties
Molecular formula C8H8N6O6
Molar mass 284.19 g/mol
Hazards
R-phrases R20 R21 R22
Except where noted otherwise, data are given for
materials in their standard state
(at 25 °C, 100 kPa)

Infobox disclaimer and references

Murexide (NH4C8H4N5O6, or C8H5N5O6.NH3), also called ammonium purpurate or MX, is the ammonium salt of purpuric acid. It may be prepared by heating alloxantin in ammonia gas to 100° C, or by boiling uramil with mercury oxide. W.N. Hartley found considerable difficulty in obtaining specimens of murexide sufficiently pure to give concordant results when examined by means of their absorption spectra, and consequently devised a new method of preparation for murexide. In this process alloxantin is dissolved in a large excess of boiling absolute alcohol, and dry ammonia gas is passed into the solution for about three hours. The solution is then filtered from the precipitated murexide, which is washed with absolute alcohol and dried. The salt obtained in this way is in the anhydrous state. It may also be prepared by digesting alloxan with alcoholic ammonia at about 78° C; the purple solid so formed is easily soluble in water, and the solution produced is indistinguishable from one of murexide.

Murexide in its dry state has the appearance of a reddish purple powder, slightly soluble in water. In solution, its color ranges from yellow in strong acidic pH through reddish-purple in weakly acidic solutions to blue-purple in alkaline solutions. The pH for titration of calcium is 11.3.

Murexide is used in analytical chemistry as a complexometric indicator for complexometric titrations, most often of calcium ions, but also for Cu, Ni, Co, Th and rare earth metals. Cf. Eriochrome Black T. Due to the minute amounts needed for this purpose, it is often used in a 1:250 mixture with potassium sulfate.

Murexide is also used as a colorimetric reagent for measurement of calcium and rare earth metals; for calcium, the pH required is 11.3, detection range lies between 0.2-1.2 ppm, and the maximum absorbance wavelength is 506 nm.

Murexide and methyl red are investigated as promising enhancers of sonochemical destruction of chlorinated hydrocarbon pollutants.


[edit] References

This article incorporates text from the Encyclopædia Britannica Eleventh Edition, a publication now in the public domain.