Multiphase flow

From Wikipedia, the free encyclopedia

In fluid mechanics, multiphase flow is a generalisation of the modelling used in two-phase flow to cases where the two phases are not chemically related (e.g. dusty gases) or where more than two phases are present (e.g. in modelling of propagating steam explosions).

Each of the phases is considered to have a separately defined volume fraction (the sum of which is unity), and velocity field. Conservation equations for the flow of each species (perhaps with terms for interchange between the phases), can then be written down straightforwardly.

The momentum equation for each phase is less straightforward. It can be shown that a common pressure field can be defined, and that each phase is subject to the gradient of this field, weighted by its volume fraction. Transfer of momentum between the phases is sometimes less straightforward to determine, and in addition, a very light phase in bubble form has a virtual mass associated with its acceleration. (The virtual mass of a single bubble is about half its displaced mass).

These terms, often called constitutive relations, are often strongly dependent on flow regime.

[edit] See also

• Two-phase flow
• Buckley–Leverett equation
• Darcy's law for multiphase flow in porous media.
• Multiphase flow meter

[edit] References

• Crowe, Clayton; Sommerfield, Martin; Yutaka, Tsuji (1998). Multiphase Flows with Droplets and Particles. CRC Press. ISBN 0849394694. 
• Wang, M. Impedance mapping of particulate multiphase flows, Flow Measurement and Instrumentation, (2005) Vol. 16
• Crowe, Clayton (2005). Multiphase Flow Handbook. CRC Press. ISBN 0849312809. 
• Brennen, Christopher (2005). Fundamentals of Multiphase Flow. Cambridge University Press. ISBN 0521848040.