Milwaukee Road class A

From Wikipedia, the free encyclopedia

Milwaukee Road class A
Milwaukee Road class A
Milwaukee Road class A #2 at Chicago, Illinois on September 25, 1935.
Power type steam
Builder American Locomotive Company
Serial number 68684, 68685, 68729, 68828
Build date May 1935, May 1936, April 1937
Configuration 4-4-2
Gauge 4 ft 8½ in (1,435 mm)
Driver size 84 in diameter (2.13 m)
Length 88 ft 8 in (27.02 m)
Weight on drivers 144,500 lb (66,000 kg)
Locomotive and tender combined weight 537,000 lb (244,000 kg)
Fuel type oil
Fuel capacity 4,000 US gallons (15,100 L)
Water capacity 13,000 US gallons (49,000 L)
Boiler pressure 300 lbf/in² (2.07 MPa)
Heating surface: Firebox 69 ft² (6.4 m²)
Heating surface: Total 3,245 ft² (301.5 m²)
Superheater area 1,029 ft² (96 m²)
Cylinders 2
Cylinder size 19 in × 28 in (480 mm × 710 mm)
Tractive effort 30,685 lbf
Career Milwaukee Road
Number in class 4
Number 1 – 4
Retired 1949 – 1951
Disposition scrapped

The Milwaukee Road's class A comprised four (#1–#4) high-speed, streamlined 4-4-2 "Atlantic" type steam locomotives built by ALCO in 1935-37 to haul the Milwaukee's Hiawatha express passenger trains. They were among the last Atlantic types built in the United States, and certainly the largest and most powerful. The class were the first locomotives in the world built for daily operation at over 100 mph, and the first class built completely streamlined, bearing their casings their entire lives. Although partially supplanted by the larger F7 "Hudsons" from 1937, they remained in top-flight service until the end. Locomotive #3 was taken out of service in 1949 and cannibalised for spares to keep the other three running until 1951. None survive.

[edit] History

Rear view of A class locomotive #2.
Rear view of A class locomotive #2.

They proved highly successful, indeed exceeding design goals. Designed for keeping a 6½ hour schedule between Chicago, Illinois and the Minneapolis-St. Paul "Twin Cities", the class proved themselves capable of handling nine cars on a 6¼ hour schedule. The only change over the years, except bumps and dents in the casing, was the addition of a Mars light beneath the winged emblem on the nose in 1947.

When introduced, they hauled the fastest scheduled express trains in the world, with average speeds over the whole run, including stops, of greater than 80 mph. Regular running at 100 mph or greater was required to keep these schedules; the class A locomotives were designed to cruise at over 100 mph and be able to achieve 120 mph. A recorded run with a dynamometer car behind the locomotive was made on May 15, 1935 by locomotive #2 between Milwaukee, Wisconsin and New Lisbon, Wisconsin. Over a 14-mile stretch the speed of 112.5 mph was recorded. This was the fastest authenticated speed reached by a steam locomotive at the time, making #2 the rail speed record holder for steam and the first steam locomotive to top 110 mph. There are reports, without physical evidence or accurate records, that these locomotives could exceed 120 mph. Such speeds would have placed the class A in contention with the LNER Class A4 and German BR 05 for the crown of fastest locomotive of all time, but so far no records have been unearthed.

The design was fairly conventional but unusual in some aspects. One major goal was reducing reciprocating mass, which could not be completely counterbalanced. This was the reason for the high boiler pressure of 300 lbf/in³, which enabled the use of smaller, lighter pistons. The main rods connected to the first pair of driven wheels rather than the (more conventional) second; again, this reduced the reciprocating mass. The large 84 inch diameter driving wheels (80 inch was the standard) reduced piston speed and made high speeds less taxing on the machinery. The streamlined casings were designed to open easily for servicing; the front end contained a pair of clamshell doors to access the smokebox front.

[edit] References

Languages