Microlens

From Wikipedia, the free encyclopedia

Microlenses are small lenses, generally with diameters less than a millimetre (mm) and often as small as 10 micrometres (µm). The small sizes of the lenses means that a simple design can give good optical quality but sometimes unwanted effects arise due to optical diffraction at the small features. A typical microlens may be a single element with one plane surface and one spherical convex surface to refract the light. Because microlenses are so small, the substrate that supports them is usually thicker than the lens and this has to be taken into account in the design. More sophisticated lenses may use aspherical surfaces and others may use several layers of optical material to achieve their design performance.

A different type of microlens has two flat and parallel surfaces and the focusing action is obtained by a variation of refractive index across the lens. These are known as gradient-index (GRIN) lenses. Some microlenses achieve their focusing action by both a variation in refractive index and by the surface shape.

Another class of microlens, sometimes known as micro-Fresnel lenses, focus light by refraction in a set of concentric curved surfaces. Such lenses can be made very thin and lightweight. Binary-optic microlenses focus light by diffraction. They have grooves with stepped edges or multilevels that approximate the ideal shape. They have advantages in fabrication and replication.

Microlens arrays contain multiple lenses formed in a one-dimensional or two-dimensional array on a supporting substrate. If the individual lenses have circular apertures and are not allowed to overlap they may be placed in a hexagonal array to obtain maximum coverage of the substrate. However there will still be gaps between the lenses which can only be reduced by making the microlenses with non-circular apertures.

Contents

[edit] Fabrication

In the 17th century, Robert Hooke and Antonie van Leeuwenhoek both developed techniques to make small glass lenses for use with their microscopes. Hooke melted small filaments of glass and allowed the surface tension in the molten glass to form the smooth spherical surfaces required for lenses.[1] The principle has been repeated by etching patterns into material such as photoresist and melting the resist to form arrays of multiple lenses.[2][3]

Advances in technology have enabled microlenses to be designed and fabricated to close tolerances by a variety of methods. In most cases multiple copies are required and these can be formed by moulding or embossing from a master lens array. The ability to fabricate arrays containing thousands or millions of precisely spaced lenses has led to an increased number of applications.[4]

The optical efficiency of diffracting lenses depends on the shape of the groove structure and, if the ideal shape can be approximated by a series of steps or multilevels, the structures may be fabricated using technology developed for the integrated circuit industry. This area is known as binary optics.[5]

Microlenses in recent imaging chips have attained smaller and smaller sizes. The Canon EOS-1Ds Mark III packs 21.1 million microlenses onto its CMOS imaging chip, one per photosite, each just 6.4 micrometer across. An announced Sony DSLR 24.6MP image sensor will have even smaller microlenses.

[edit] Applications

Single microlenses are used to couple light to optical fibres while microlens arrays are often used to increase the light collection efficiency of CCD arrays. They collect and focus light that would have otherwise fallen on to the non-sensitive areas of the CCD. Microlens arrays are also used in some digital projectors, to focus light to the active areas of the LCD used to generate the image to be projected.

Combinations of microlens arrays have been designed that have novel imaging properties, such as the ability to form an image at unit magnification and not inverted as is the case with conventional lenses. Microlens arrays have been developed to form compact imaging devices for applications such as photocopiers and mobile-phone cameras.

Another application is in 3D imaging and displays. In 1902 Frederick Ives proposed the use of an array of alternately transmitting and opaque strips to define the viewing directions for a pair of interlaced images and hence enable the observer to see a 3D stereoscopic image.[6] The strips were later replaced by Hess with an array of cylindrical lenses known as a lenticular screen, to make more efficient use of the illumination.[7]

More recently, the availability of arrays of spherical microlenses has enabled Gabriel Lippmann’s idea for integral photography to be explored and demonstrated.[8][9]

[edit] Characterisation

In order to characterise microlenses it is necessary to measure parameters such as the focal length and quality of transmitted wavefront.[10] Special techniques and new definitions have been developed for this.

For example, because it is not practical to locate the principal planes of such small lenses, measurements are often made with respect to the lens or substrate surface. Where a lens is used to couple light into an optical fibre the focused wavefront may exhibit spherical aberration and light from different regions of the microlens aperture may be focused to different points on the optical axis. It is useful to know the distance at which the maximum amount of light is concentrated in the fibre aperture and these factors have led to new definitions for focal length. To enable measurements on microlenses to be compared and parts to be interchanged, a series of international standards has been developed to assist users and manufacturers by defining microlens properties and describing appropriate measurement methods.[11][12][13][14]

[edit] Microoptics in nature

Examples of microoptics are to be found in nature ranging from simple structures to gather light for photosynthesis in leaves to compound eyes in insects. As methods of forming microlenses and detector arrays are further developed then the ability to mimic optical designs found in nature will lead to new compact optical systems.[15][16]

[edit] References

  1. ^ Hooke R, Preface to Micrographia. The Royal Society of London. (1665).
  2. ^ Popovic CD, Sprague RA, Neville Connell GA, "Techniques for monolithic fabrication of microlens arrays", Appl. Opt. 27 1281–1284, (1988).
  3. ^ Daly D, Stevens R F, Hutley M C, Davies N, "The manufacture of microlenses by melting photoresist". Proceedings of seminar "Microlens Arrays", May 1991. IOP Short Meeting Series No 30, 23–34.
  4. ^ Borrelli, N F. Microoptics technology: fabrication and applications of lens arrays and devices. Marcel Dekker, New York (1999).
  5. ^ Veldkamp W B, McHugh T J. "Binary optics", Scientific American, Vol. 266 No. 5 pp 50–55, (May 1992).
  6. ^ Ives FE. Parallax stereogram and process of making same. US Patent 725,567 (1903).
  7. ^ Hess W. Improved manufacture of stereoscopic pictures. UK Patent 13,034 (1912).
  8. ^ Lippmann G. "Epreuves reversibles. Photographies integrales", Comptes Rendus 146 446–451 (1908).
  9. ^ Stevens R F, Davies N. "Lens arrays and photography". The Journal of Photographic Science. Vol 39 pp 199–208, (1991).
  10. ^ Iga K, Kokburn Y, Oikawa M. Fundamentals of microoptics. Academic Press, London (1984).
  11. ^ ISO 14880-1:2001. Optics and photonics - Microlens arrays - Part 1: Vocabulary
  12. ^ ISO 14880-2:2006. Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations
  13. ^ ISO 14880-3:2006. Optics and photonics - Microlens arrays - Part 3: Test methods for optical properties other than wavefront aberrations
  14. ^ ISO 14880-4:2006. Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties.
  15. ^ Land M. "The optics of animal eyes". Proc Royal Institution, vol 57, pp. 167–189, (1985)
  16. ^ Duparré J. et al, "Microoptical telescope compound eye". Optics Express, Vol. 13, Issue 3, pp. 889–903 (2005).
Languages