Membrane potential

From Wikipedia, the free encyclopedia

This article or section includes a list of references or external links, but its sources remain unclear because it lacks in-text citations. You can improve this article by introducing more precise citations.

This article needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (November 2007)

Membrane potential (or transmembrane potential or transmembrane potential difference or transmembrane potential gradient), is the electrical potential difference (voltage) across a cell's plasma membrane. The plasma membrane surrounds the cell to provide a stable environment for biological processes. Membrane potential arises from the action of ion transporters embedded in the membrane which maintain viable ion concentrations inside the cell. The term "membrane potential" is sometimes used interchangeably with cell potential but is applicable to any lipid bilayer or membrane.

The membrane potential of most cells is kept relatively stable. Unlike most cells, neurons are specialized to use changes in membrane potential for fast communication, primarily with other neurons. When a neuron fires, the action potential travels down the axon to the synapses: the magnitude of the axonal membrane potential varies dynamically along its length. On reaching a (chemical) synapse, a neurotransmitter is released causing a localized change in potential in the membrane of the target neuron by opening ion channels in its membrane.

[edit] Graded membrane potential

Main article: Postsynaptic potential

A graded membrane potential is a gradient of transmembrane potential difference along a length of cell membrane. Graded potentials are particularly important in neurons that lack action potentials, such as some types of retinal neurons. Graded potentials that depolarize the membrane, increasing the membrane potential above the resting potential are important as "triggering potentials" that can spread along the surface of neuronal cell bodies to axon initial segments and trigger action potentials. Graded potentials that hyperpolarize the membrane potential to values more negative than the resting potential can inhibit the generation of action potentials. Graded potentials can arise at either portions of cells that function as sensory receptors or at synapses that are activated by neurotransmitters. These two types of graded potentials are called receptor potentials or synaptic potentials. Graded potentials are distinct from action potentials in that graded potentials spread electric potential changes along cell membranes without activating the kind of constant magnitude propagating signal that is characteristic of the action potential. Graded potentials are highest at a source and decay with increasing distance from the source.Membrane potential is significantly important as far as normal body functions are to be maintained

[edit] The Ionic Basis of the resting potential

At its core, the origin of every resting membrane potential is some sort of ion pump exchanger or transporter. Any voltage — membrane potentials included — is a separation of electric charges across a resistive barrier. The typical membrane potential of a cell arises from the separation of sodium ions from intracellular immobile anions across the membrane of the cell. In order for this separation to occur, a concentration gradient of potassium ions must first be set up. This work is done by the ion pumps/transporters and/or exchangers and generally is powered by ATP.

In the case of the standard membrane potential across a cell's plasma membrane, potassium (and sodium) gradients are established by the NaKATPase (sodium potassium exchanger). In other cases for example, a membrane potential may be established by acidification of the inside of a membranous compartment (such as the proton pump that generates membrane potential across synaptic vesicle membranes).

In its most simple terms one can trace the origin of the energy of the membrane potential (voltage is, after all, potential energy) thus:

Solar energy → converted to sugar by plants → converted by glycolysis to ATP → converted to concentration gradient by NaKATPase (sodium/potassium pump) → converted to voltage by passive K⁺ transport across a selectively permeable cell membrane.

[edit] Electroneutrality

In most quantitative treatments of membrane potential, such as the derivation of Goldman equation, electroneutrality is assumed; that is, that there is no measurable charge excess in any side of the membrane. So, although there is an electric potential across the membrane due to charge separation, there is no actual measurable difference in the global concentration of positive and negative ions across the membrane (as it is estimated below), that is, there is no actual measurable charge excess in either side. That occurs because the effect of charge on electrochemical potential is hugely greater than the effect of concentration so an undetectable change in concentration creates a great change on electric potential.

[edit] Generation of the resting potential

Cell membranes are typically permeable to only a subset of ionic species. These species usually include potassium ions, chloride ions, bicarbonate ions, and others. To simplify the description of the ionic basis of the resting membrane potential, it is most useful to consider only one ionic species at first, and consider the others later. Since trans-plasma-membrane potentials are almost always determined primarily by potassium permeability, that is where to start.

A diagram showing the progression in the development of a membrane potential from a concentration gradient (for potassium). Green arrows indicate net movement of K⁺ down a concentration gradient. Red arrows indicate net movement of K⁺ due to the membrane potential. The diagram is misleading in that while the concentration of potassium ions outside of the cell increases, only a small amount of K⁺ needs to cross the membrane in order to produce a membrane potential with a magnitude large enough to counter the tendency the potassium ions to move down the concentration gradient.

• Panel 1 of the diagram shows a digramatic representation of a simple cell where a concentration gradient has already been established. This panel is drawn as if the membrane has no permeability to any ion. There is no membrane potential, because despite there being a concentration gradient for potassium, there is no net charge imbalance across the membrane. If the membrane were to become permeable to a type of ion that is more concentrated on one side of the membrane, then that ion would contribute to membrane voltage because the permeant ions would move across the membrane with net movement of that ion type down the concentration gradient. There would be net movement from the side of the membrane with a higher concentration of the ion to the side with lower concentration. Such a movement of one ion across the membrane would result in a net imbalance of charge across the membrane and a membrane potential. This is a common mechanism by which many cells establish a membrane potential.
• In panel 2 of the diagram, the cell membrane has been made permeable to potassium ions, but not the anions (An^-) inside the cell. These anions are mostly contributed by protein. There is energy stored in the potassium ion concentration gradient that can be converted into an electrical gradient when potassium (K) ions move out of the cell. Note that K ions can move across the membrane in both directions but by the purely statistical process that arises from the higher concentration of K inside the cell, there will be more K ions moving out of the cell. Because there is a higher concentration of K ions inside the cells, their random molecular motion is more likely to encounter the permeability pore (ion channel) than is the case for the K ions that are outside and at a lower concentration. An internal K⁺ is simply "more likely" to leave the cell than an extracellular K⁺ is to enter it. It is a matter of simple diffusion doing work by dissipating the concentration gradient. As potassium leaves the cell, it is leaving behind the anions. Therefore a charge separation is developing as K⁺ leaves the cell. This charge separation creates a transmembrane voltage. This transmembrane voltage is the membrane potential. As potassium continues to leave the cell, separating more charges, the membrane potential will continue to grow. The length of the arrows (green indicating concentration gradient, red indicating voltage), represents the magnitude of potassium ion movement due to each form of energy. The direction of the arrow indicates the direction in which that particular force is applied. Thus, the building membrane voltage is an increasing force that acts counter to the tendency for net movement of K ions down the potassium concentration gradient.
• In Panel 3, the membrane voltage has grown to the extent that its "strength" now matches the concentration gradient's. Since these forces (which are applied to K⁺ions) are now the same strength and oriented in opposite directions, the system is now in equilibrium. Put another way, the tendency of potassium to leave the cell by running down its concentration gradient is now matched by the tendency of the membrane voltage to pull potassium ions back into the cell. K⁺ continues to move across the membrane, but the rate at which it enters and leaves the cell are the same, thus, there is no net potassium current. Because the K⁺ is at equilibrium, membrane potential is stable, or "resting".

[edit] The number of ions involved in generating the upstroke of the action potential

You may have noticed that in the diagram above, while the red arrow (with length proportional to the voltage) was growing, the green arrow (with length proportional to the concentration gradient) was not changing significantly. How can this be? If K⁺ is leaving the cell, won't this deplete the cell of intracellular K⁺, thus decreasing the concentration gradient? The answer to the latter question is "not much", the concentration gradient is not dissipated very much. So how can this be? To answer this question, one must understand is that the number of potassium ions that must cross the membrane is actually quite small. This is because the membrane potential occurs only right next to the membrane. The membrane potential is stored in the membrane capacitance, which physically is only the charges in direct contact with the membrane surfaces. The voltage across the capacitor is the membrane potential (see action potential for an example of a membrane RC circuit). Knowing that, one needs only to calculate how much current needs to flow to discharge the membrane capacitance to calculate the number of charges that must flow across the membrane to change the capacitor voltage (membrane potential) by, say 100 mV.

The capacitative current that flows into or out of a capacitor to effect a change in membrane potential of amplitude dV, is given by the equation:

To make a back-of-the-envelope calculation, let’s assume the normal conditions for cylindrical cardiomyocytes during the action potential upstroke:

• dV: 100 mV
• dt: 2 ms
• c_m: 0.01 to 0.02 farads·m^-2, the latter for cardiomyocytes due to the membrane invaginations of the T tubules.
• A: cell membrane surface area
• Length L: 100 μm
• radius r: 5 μm
  • Thus, since the cell is a cylinder,
  • Area, A: 3.3×10^-9 m²
  • Volume, V: 7.85×10^-12 liters
• Intracellular sodium concentration, [Na⁺]_i: 15 mM

This equals 3.3 nanoamps. Now, we wanted to know the number of ions, n, this corresponds to. dt is 2 ms, every ion has 1 elementary charge, e, each, and one coulomb is 6.24×10¹⁸ e.

Therefore, it would take the movement of 41 million charges (i.e. sodium ions) across the membrane to change the voltage of the cardiomyocyte by 100 mV in 2 ms. We want to know what that will do to the intracellular sodium concentration, which in cardiomyocytes is about 15 millimoles per liter. Avogadro's number, which relates numbers to moles, is 6.022·10²³ mol^-1:

Since the normal inside concentration of sodium is some 15 mM, 8.7 μM entering the cell during the action potential upstroke is only about 0.058% extra sodium ions

The bottom line for those who don’t want to sift through the calculation is that only about 40,000,000 sodium ions must cross the membrane to move the membrane potential by 100 mV in 2 ms, and that this constitutes only some 0.06% of the sodium already present in the cell. This is at the action potential's most extreme and in a very large cell. In other cells, calculations may look different, depending on surface-to-volume ratio, max dV/dt etc.

[edit] Equilibrium potentials

An equilibrium potential (also called reversal potential or Nernst Potential) is the membrane voltage at which the distribution across the membrane of a particular ion is in equilibrium. This means that the transmembrane voltage exactly matches (resists) the diffusive tendency of the ion (or vice versa), such that the net current of the ion across the membrane is zero and unchanging. The equilibrium potential of a particular ion is designated by the notation E_ion. In the previous section, the equilibrium potential specifically for potassium ions was described, but any ion present will have an equilibrium potential that is determined by the concentration difference for that ion across the membrane and temperature. For potassium, E_K is typically around −80 mV. For sodium, E_Na is typically around +60 mV. Note that the sign of E_Na and E_K are opposite. This is because the concentration gradient for potassium is directed out of the cell, while the concentration gradient for sodium is directed into the cell.

[edit] Resting potential revisited

The resting potential of a cell can be most thoroughly understood by thinking of it in terms of equilibrium potentials. In the example diagram above, the model cell was given only one permeant ion (potassium). In this case, the resting potential of this cell would be the same as the equilibrium potential for potassium.

However, a real cell is more complicated, having permeabilities to many ions, each of which contributes to the resting potential. To understand better, consider a cell with only two permeant ions, potassium and sodium. Consider a case where these two ions have equal concentration gradients directed in opposite directions, and that the membrane permeabilities to both ions are equal. K⁺ leaving the cell will tend to drag the membrane potential toward E_K. Na⁺ entering the cell will tend to drag the membrane potential toward E_Na. Since the permeabilities to both ions were set to be equal, the membrane potential will, at the end of the Na/K tug-of-war, end up halfway between E_Na and E_K. As E_Na and E_K were equal but of opposite signs, halfway in between is zero, meaning that the membrane will rest at 0 mV. Note that even though the membrane potential at 0 mV is stable, it is not an equilibrium condition because neither of the contributing ions are in equilibrium. Ions diffuse down their electrochemical gradients through ion channels, but the membrane potential is upheld by continual K influx and Na efflux via ion pumps.

Closer to the actual case for a real resting potential is that neither the equilibrium potentials nor the permeabilities of Na and K are equal. Na permeability is rather about 5% of the K permeability, whereas E_K is about -80 mV and E_Na about + 60 mV. Thus the membrane potential will not be right at E_K, but rather depolarized from E_K by an amount of approximately 5% of the 140 mV difference between E_K and E_Na. Thus, the cell's resting potential will be about −73 mV.

In a more formal notation, the membrane potential is the weighted average of each contributing ion's equilibrium potential. The size of each weight is the relative permeability of each ion. In the normal case, where three ions contribute to the membrane potential:

,

where

• E_m is the membrane potential, measured in volts
• E_X is the equilibrium potential for ion X, also in volts
• P_X is the relative permeability of ion X in arbitrary units (e.g. siemens for electrical conductance)
• P_tot is the total permeability of all permeant ions, in this case P_K⁺ + P_Na⁺ + P_Cl^-

[edit] All other values of membrane potential

From the viewpoint of biophysics, there is nothing particularly special about the resting membrane potential. It is merely the membrane potential that results from the membrane permeabilities that predominate when the cell is resting. The above equation of weighted averages always applies, but the following approach may be easier to visualize. At any given moment, there are two factors for an ion that determine how much influence that ion will have over the membrane potential of a cell.

1. That ion's driving force and,
2. That ion's permeability

Intuitively, this is easy to understand. If the driving force is high, then the ion is being "pushed" across the membrane hard (more correctly stated: it is diffusing in one direction faster than the other). If the permeability is high, it will be easier for the ion to diffuse across the membrane. But what are 'driving force' and 'permeability'?

• Driving force: the driving force is the net electrical force available to move that ion across the membrane. It is calculated as the difference between the voltage that the ion "wants" to be at (its equilibrium potential) and the actual membrane potential (E_m). So formally, the driving force for an ion = E_m - E_ion

• For example, at our earlier calculated resting potential of −73 mV, the driving force on potassium is 7 mV ((−73 mV) − (−80 mV) = 7 mV. The driving force on sodium would be (−73 mV) − (60 mV) = −133 mV.

• Permeability: is simply a measure of how easily an ion can cross the membrane. It is normally measured as the (electrical) conductance and the unit, siemens, corresponds to 1 C·s^-1·V^-1, that is one charge per second per volt of potential.

So in a resting membrane, while the driving force for potassium is low, its permeability is very high. Sodium has a huge driving force, but almost no resting permeability. In this case, the math tells us that potassium carries about 20 times more current than sodium, and thus has 20 times more influence over E_m than does sodium.

However, consider another case—the peak of the action potential. Here permeability to Na is high and K permeability is relatively low. Thus the membrane moves to near E_Na and far from E_K.

The more ions are permeant, the more complicated it becomes to predict the membrane potential. However, this can be done using the Goldman-Hodgkin-Katz equation or the weighted means equation. By simply plugging in the concentration gradients and the permeabilities of the ions at any instant in time, one can determine the membrane potential at that moment. What the GHK equations says, basically, is that at any time, the value of the membrane potential will be a weighted average of the equilibrium potentials of all permeant ions. The "weighting" is the ions relative permeability across the membrane.

[edit] Effects and implications

While cells expend energy to transport ions and establish a transmembrane potential, they use this potential in turn to transport other ions and metabolites such as sugar. The transmembrane potential of the mitochondria drives the production of ATP, which is the common currency of biological energy.

Cells may draw on the energy they store in the resting potential to drive action potentials or other forms of excitation. These changes in the membrane potential enable communication with other cells (as with action potentials) or initiate changes inside the cell, which happens in an egg when it is fertilized by a sperm.

In neuronal cells, an action potential begins with a rush of sodium ions into the cell through sodium channels, resulting in depolarization, while recovery involves an outward rush of potassium through potassium channels. Both these fluxes occur by passive diffusion.

[edit] See also

• Action potential
• Electrochemical potential
• Goldman Equation
• Membrane biophysics
• Signal (biology)

[edit] External links

• Nernst/Goldman Equation Simulator
• membrane+potential at eMedicine Dictionary

[edit] References

• Alberts et al. Molecular Biology of the Cell. Garland Publishing; 4th Bk&Cdr edition (March, 2002). ISBN 0-8153-3218-1. Undergraduate level.
• Guyton, Arthur C., John E. Hall. Textbook of medical physiology. W.B. Saunders Company; 10th edition (August 15, 2000). ISBN 0-7216-8677-X. Undergraduate level.
• Hille, B. Ionic Channel of Excitable Membranes Sinauer Associates, Sunderland, MA, USA; 1st Edition, 1984. ISBN 0-87893-322-0
• Nicholls, J.G., Martin, A.R. and Wallace, B.G. From Neuron to Brain Sinauer Associates, Inc. Sunderland, MA, USA 3rd Edition, 1992. ISBN 0-87893-580-0
• Ove-Sten Knudsen. Biological Membranes: Theory of Transport, Potentials and Electric Impulses. Cambridge University Press (September 26, 2002). ISBN 0-521-81018-3. Graduate level.