Medium machine gun
From Wikipedia, the free encyclopedia
 |
This article does not cite any references or sources. (December 2006) Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed. |
A medium machine gun or MMG in modern terms, usually refers to a belt-fed, full-power rifle caliber (such as 7.62 mm rifle caliber) automatic weapon with some provision for more extended firing than lighter automatic firearms, often using an extra-heavy barrel, fins, barrel-changing, or even a water-cooling jacket; but they are light enough to be used by infantry with a bipod. Typically, they weigh between 15 and 40 pounds. The descriptor is a grey area, especially historically, and occupies an uncertain realm between machine guns called light and heavy.
Two features which have remained somewhat constant, however, are some added ability for greater fire over automatic rifles, and the ability to be used in both light infantry support roles on a bipod, but also on mounts and tripods. While heavy machine guns (HMG) are mostly fired from heavy mounts, and light machine guns (LMG) are usually operated with bipods, MMGs have historically been used in both. Heavy machine guns are either crew-served or mounted, while MMGs are usually operated by one to two soldiers. Light machine guns and automatic rifles are often an individual weapon with a fixed, naked barrel. On the other hand medium machine guns have usually had more endurance of some sort, such as the aforementioned heavier barrel, barrel-change, fins etc.
Contents |
[edit] History
In the late 1800s, Gatling gun and other externally-powered types such as the Nordenfelt were often made in different ranges of calibers, such as half-inch and one-inch. Thanks to their many barrels, overheating was not so much of issue, and they were also quite heavy; being, essentially, heavy machine guns.
When Hiram Maxim developed his recoil-powered machine gun that used a single barrel, the first main design was a modest 26 pounds (11.8 kg) in weight, and fired a .45-inch rifle caliber bullet (from a 24 inch long barrel). As depicted in a famous photo of Maxim, it could be picked up complete with its 15 pound (6.8 kg) tripod with one arm. It was similar to present day (2005) medium machine guns, but it could not be fired for extended periods. As a result, he created a water jacket cooling system to enable it to fire for extended periods. This added significant weight, as did changes to more powerful cartridges. This class of heavy water-cooled machines gun would eventually be regarded as the classic heavy machine guns.[citation needed] However, the much lighter total weight possible by using recoil to power automatic loading was not lost on the firearms designers of the day. Soon there was a host of new automatic firearms that used this concept, such as the Borchardt pistol, the Cei-Rigotti rifle, the Madsen 1902, as well as lighter, gas-operated, air-cooled designs.
[edit] Early 1900s: Medium, Heavy and Light
Many new designs were developed, some powered by gas or recoil or some combination of two (Colt 1895, Hotchkiss, etc). Also, rather than the rather heavy water jacket, new designs introduced other types of cooling, such as barrel replacement, metal fins, and/or heat sinks or some combination of all of them.
Machine guns then diverged into heavier and lighter designs. The later model water-cooled Maxim gun and its derivatives (the MG 08 and the Vickers gun, as well as the American Browning Model 1917 machine gun) were all substantial weapons. The .303 inch Vickers, for example, weighed 33 lb (15 kg) alone and on its tripod mount the total weight was 50 lb (22.7 kg). The heavier designs could, and in some cases did literally, fire for days on end. The need was to be able to cut down potentially thousands of charging soldiers. The heavy machine gun was mounted on a tripod and was often water-cooled, and a well-trained and well-supplied crew could fire for hours on end. Carefully positioned heavy machine guns could stop an attacking force before they reached their objectives.
The first machine guns in use before World War I covered a wide range of characteristics. In addition to these heavier designs, there were also a number of types of lighter types. During the same period a number of new lighter air-cooled designs were developed, that rather than weighing well over 30 lb (15 kg) were lighter and mobile. In WWI they were to be as important as the heavier designs, and were used to support squads and infantry on the move, on aircraft, and on many types of vehicle as well (and on tanks to some extent). The two that would become critical were new medium and light machine guns. The new medium machine guns offered less, or more difficult to use cooling than the heavier designs, but more than the lightest.
Light machine guns were introduced as lighter, more portable automatic weapons. They still fired the same full power rifle caliber ammunition, but used lighter barrels without extra cooling and were fired from a bipod. Light machine guns were not intended to be fired for extended periods of time. The lightest of the new designs were not capable of sustained fire, as they did not have extra cooling features and were fed from a comparatively small magazine. Essentially a machine rifle with a bipod, weapons like the Chauchat or the Madsen 1902 were the most mobile, but were made for single and burst fire. These were used in assaults to great effect by infantry, but not as popular on other mounts.
The medium designs offered greater flexibility, either using a bipod and being used like lighter designs, or being put on a tripod, or on heavier mounts. The Hotchkiss Mark I (e.g. Benet-Mercie M1909) was a 27.6 lb (12.2 kg) MG that normally used a mini tripod and linkable 30 round strips or in vehicles, but there was also a belt-fed version of it. Not be confused with heavier Hotchkiss models (such as the M1914), the design proved a useful intermediate and would serve even to the end of WWII in some jobs. The design would be followed by lighter machine rifles and better medium types. They also shared a common characteristics: they fired full power rifle caliber ammunition such as 8 mm Mauser or .30-06 Springfield.
The Lewis gun, which weighed 27 lb (12.3 kg), was commonly used with a 47 round drum and bipod;it was used on the move in support of squads, and on vehicles and aircraft as well, or on a tripod (either for Anti-Aircraft use, or to fill in for a heavier MG). What made it very useful was that it was significantly lighter than water-cooled weapons, but could fire nearly as much due to a very large cooling assembly. These sort of multi-purpose machine guns, would be further developed, and later given names like Universal Machine gun or later, general-purpose machine gun, and would eventually supplant the water cooled designs. Later designs have mostly switched to fast barrel replacement as an alternative to cooling, which further reduces the weapons weight (but can increase the total weight carried by a soldier). Some earlier designs like the Vickers could easily change barrels, but it was for replacing worn barrels. It was in the 1920s and 1930s that barrel replacement as a means for cooling became more popular (Such as the ZB 1930, and later the MG34 and the Bren gun).
[edit] Mid 1900s
The heavier water cooled designs continued to be used throughout WWII and into the 1960s, but were gradually phased out in favor of the heavier air cooled designs. The mediums are now used both as heavy machine guns while mounted on tripods and as light machine guns while mounted on bipods. This was possible in part because a heavy static MG position was not a very effective tactic in vehicle centered warfare, and the lighter air-cooled designs could nearly match the capabilities of water cooled designs with a combination of other, lighter cooling features. This resulted in the widespread use of medium weight machine guns by infantry, but also on tanks, aircraft, and on tripods.
The practice of using medium weight machine guns continued into the 1930s. The French made a version of their infantry machine gun, the Chatellerault M1924, with 150 round magazine and internal water cooler. The German requirement for new medium machine gun, a Einheitsmaschinengewehr (standard machine gun), resulted in a Universelle Maschinengewehr (universal machine gun) that was to not only be a medium machine gun that was used in many roles, but was specifically named so. It was similar to older mediums in that it was a medium machine gun intended to replace older light and heavy machine guns of the same caliber, though Germany would continue using a variety of heavier and lighter automatic machine guns to a limited extent. The use of medium machine guns to replace other types would later be called a General Purpose Machine Gun by the Belgians in the 1950s. The actual practice of using medium machine guns in different roles dates back to WWI, whatever the name given by different countries. The trend toward replacing more types with mediums would receive a great boost as tactics using heavy water cooled MGs were slowy phased out, but suffer a loss when there was shift back to lighter caliber automatic infantry support weapons.
[edit] Late 1900s
The Belgian name Mitrailleuse d'Appui General, or General Purpose Machine Guns (GPMG) became popular for describing medium machine guns used in multiple roles. The mediums fired full power rifle caliber ammunition, but had some concessions for more extended firing and more general usage. This generally included both bipod and tripod/pintle mounting options and quick-change barrels. Water cooled machine guns of the same caliber of the existing mediums were no longer useful, as the situation in which they excelled (non-stop firing) was regarded as no longer being needed in modern warfare. This is because mass charges by infantry are rarely done, replaced by AFV based thrusts, and that a static MG position is a high priority target for infantry rocket-launchers. Medium machine guns did not, and still do not actually match the sustained firing ability of many older mediums; there is no longer a need for it. Most medium machine guns that use barrel replacement overheat after about 200 rounds, and then a quick barrel replacement is needed (such as was done on the Bren). They can only keep firing if they have spare barrels. However, barrels are expensive and heavy so only a limited amount are kept. As a result, even if 2-3 barrels were carried and rotated in and out, it would not allow non-stop fire; the removed barrel does not cool down before the next must be replaced. This has become a moot point, since situations where non-stop fire is needed is rare, and other tactics and weapons can deal with an emergency.
[edit] Lighter caliber light machine guns
The 1960s and 70s saw the introduction of new families of automatic weapons using smaller cartridges than the full power rifle caliber cartridges previously in use. These weapons were called Squad Automatic Weapons (SAW). They have taken roles away from the previous medium machine guns, as well as lighter machine guns of the same caliber. The medium machine guns continue to be used in many of their previous roles however, especially on tanks and vehicles. Often countries field a mix of medium caliber medium machine guns, and smaller caliber light machine guns.
These weapons typically fired the 7.62x39 cartridge fired by the AK-47 series or the 5.56x45 NATO standard cartridge first used in the AR-15/M-16 rifles. These very lightweight machineguns were designed for more sustained fire than normal infantry rifles, several hundred rounds worth of extended firing. They were similar in weight to an empty older light machine gun and several pounds lighter than mediums, but offered a much higher volume of fire due to their smaller caliber and lighter round. Many models were scaled-down medium caliber designs or heavier, longer barrel versions of infantry standard Assault rifles. Examples include the FN Minimi, M249 or the RPK.
[edit] 21st century and modern usage
The term Medium machine gun is used to refer to the ubiquitous full power rifle caliber machine gun designs, which are alternately called General purpose machine guns or Universal machine guns.
They essentially all have provisions for quick change barrels and the ability to be fired from a bipod, tripod, or pintle mount, and weigh between 20-30 pounds. Modern Western MMG/GPMG weapons almost always fire 7.62x51 full power rifle ammunition; modern Eastern MMG/GPMG weapons usually fire 7.62x54R full power rifle ammunition with a rimmed cartridge.
For example, the US Army and Marines now use the FN MAG (as the M240 machine gun) which is almost always called by its current designation M240 medium machine gun. It was originally adopted as vehicle co-axial machine in the late 1970s, but its higher reliability resulted the infantry adopting it for use over the M60 machine gun, despite being several pounds heavier. They both have quick-detachable barrels, bipods in their light infantry model, tripod and pintle mount options for other models, and similar weight and size. The M60 was typically referred to either as a Light Machine gun or a General Purpose Machine gun.
Non-military experts are often frustrated by the confused terminology in use today. Even experts agree that many of the specific terms have blended together in common usage and are not sufficiently distinct today.
