Mechanical biological treatment
From Wikipedia, the free encyclopedia
A mechanical biological treatment system is a form of waste processing facility that combines a sorting facility with a form of biological treatment such as composting or anaerobic digestion. MBT plants are designed to process mixed household waste as well as commercial and industrial wastes.
Contents |
[edit] Process
The terms 'mechanical biological treatment' or 'mechanical biological pre-treatment' related to a group of solid waste treatment systems. These systems enable the recovery of materials contained within the and stabilisation of the biodegradable component of the material.[1] [2]
The sorting component of the plants resemble a materials recovery facility. This component is either configured to recover the individual elements of the waste or produce a refuse-derived fuel that can be used for the generation of power.
The components of the mixed waste stream that can be recovered include:
[edit] Terminology
MBT is also sometimes termed BMT – biological mechanical treatment – however this simply refers to the order of processing, i.e. the biological phase of the system precedes the mechanical sorting. MBT should not be confused with MHT – mechanical heat treatment - which does not include any form of biological degradation or stabilisation.
[edit] Mechanical sorting
- See also: Materials recovery facility
The "mechanical" element is usually an automated mechanical sorting stage. This either removes recyclable elements from a mixed waste stream (such as metals, plastics, glass and paper) or processes them. It typically involves factory style conveyors, industrial magnets, eddy current separators, trommels, shredders and other tailor made systems, or the sorting is made by hand. The mechanical element has a number of similarities to a materials recovery facility (MRF).[3]
Some systems integrate a wet MRF to recover & wash the recyclable elements of the waste in a form that can be sent for recycling. MBT can alternatively process the waste to produce a high calorific fuel given the term refuse derived fuel (RDF). RDF can be used in cement kilns or power plants and is generally made up from plastics and biodegradable organic waste. Systems which are configured to produce RDF include the Herhof and Ecodeco Processes. It is a common misconception that all MBT processes produce RDF. This is not the case and depends strictly on system configuration and suitable local markets for MBT outputs.
[edit] Biological processing
- See also: composting and anaerobic digestion
The "biological" element refers to either:
- Anaerobic digestion
- Composting
- Biodrying
Anaerobic digestion breaks down the biodegradable component of the waste to produce biogas and soil improver. The biogas can be used to generate electricity and heat.
Biological can also refer to a composting stage. Here the organic component is treated with aerobic microorganisms. They break down the waste into carbon dioxide and compost. There is no green energy produced by systems employing only composting treatment for the biodegradable waste.
In the case of biodrying, the waste material undergoes a period of rapid heating through the action of aerobic microbes. During this partial composting stage the heat generated by the microbes result in rapid drying of the waste. These systems are often configured to produce a refuse-derived fuel where a dry, light material is advantageous for later transport combustion.
Some systems incorporate both anaerobic digestion and composting. This may either take the form of a full anaerobic digestion phase, followed by the maturation (composting) of the digestate. Alternatively a partial anaerobic digestion phase can be induced on water that is percolated through the raw waste, dissolving the readily available sugars, with the remaining material being sent to a windrow composting facility.
By processing the biodegradable waste either by anaerobic digestion or by composting MBT technologies help to reduce the contribution of greenhouse gases to global warming.
Usable wastes for this system:
- Municipal solid waste
- Sewage sludge
Products of this system:
- Recycable materials such as metals, paper, plastics, glass etc.
- Organic fertilizer (separate collection of organic waste)
- Unusable materials prepared for their unharmful final deposit (compaction > 1.3 t/m³)
- Carbon credits – additional revenues
- High calorific fraction (refuse derived fuel – RDF) – additional revenues
Further advantages:
- The finally deposited waste is inert
- Reduction of the waste volume to be deposited to at least a half (density > 1.3 t/m³), thus the lifetime of the landfill is at least twice as long as usually
- Utilization of the leachate in the process
- No unbidden guests such as birds, dogs, vermin, rats on site
- No additional facilities for the collection and combustion of biogas as there is no biogas
- Daily covering not necessary
- Aftercare 3 to 5 years
[edit] Consideration of applications
MBT systems can form an integral part of a region's waste treatment infrastructure. These systems are typically integrated with kerbside collection shemes. In the event that a refuse-derived fuel is produced as a by-product then a combustion facility would be required.
Alternatively MBT solutions can diminish the need for home separation and kerbside collection of recyclable elements of waste. This gives the ability of local authorities and councils to reduce the use of waste vehicles on the roads and keep recycling rates high.
[edit] Position of Environmental Groups
Friends of the Earth suggests that the best environmental route for residual waste is to firstly remove the remaining recyclable elements from the waste stream (such as metals, plastics and some paper). The small amount of waste remaining should be composted or anaerobically digested and unless sufficiently clean to be used as a compost should be disposed of by incineration or - as the least favourable option - in landfills[4]. MBT plants that fit in with these statements could therefore play an increasing role in the environmental management of mixed streams. [5]
[edit] See also
- Anaerobic digestion
- Composting
- List of solid waste treatment technologies
- Lubeck Waste Treatment Facility
- Materials recovery facility
- Renewable energy
- Waste
- Waste management
[edit] External links
- Environment Agency Waste Technology Data Centre An independent UK government review of advanced waste treatment technologies.
- Enviros Mechanical Biological Treatment Information Page
- Juniper MBT report An independent study of MBT technologies commissioned with the use of UK landfill tax credits.
- SEPA MBT Planning Information Sheet Fact Sheet for Scottish Planning Considerations
[edit] References
- ^ Enviros (2006) Mechanical biological treatment website, www.mbt.landfill-site.com, Waste Technology Home Page, Accessed 22.11.06
- ^ Juniper (2005) MBT: A Guide for Decision Makers – Processes, Policies & Markets, www.juniper.co.uk, (Project funding supplied by Sita Environmental Trust), Accessed 22.11.06
- ^ Sita (2004) Sita Mechanical Biological Treatment Position Paper, www.sita.co.uk, Accessed 22.11.06
- ^ On the Main EU Directives on Waste, Briefing document by Friends of the Earth
- ^ Friends of the Earth (2005)MBT & FOE, www.foe.co.uk, Mechanical Biological Treatment Briefing, Friends of the Earth, Accessed 22.11.06
|
|||||
