LMS Garratt

From Wikipedia, the free encyclopedia

LMS Beyer-Garratt
LMS Beyer-Garratt
An unidentified garratt near Ampthill Tunnel north portal, 1954 with a Toton-Brent coal train for which it was designed. Note the Midland milepost in the foreground.
Power type Steam
Builder Beyer, Peacock & Co.
Serial number 6325–6327, 6648–6677
Build date 1927 (3), 1930 (30)
Configuration 2-6-0+0-6-2
UIC classification (1'C)(C1')ht
Gauge 4 ft 8½ in (1,435 mm)
Leading wheel size 39.5 in (1.003 m)
Driver size 63 in (1.600 m)
Wheelbase 79 ft (24.08 m)
Length 87 ft 10½ in
Locomotive weight 1927 built: 148.75 long tons (151.1 t)
1930 built: 152.5 long tons (154.9 t)
Fuel type Coal
Fuel capacity 1927 built: 7 long tons (7.1 t)
1930 built: 9 long tons (9.1 t)
Water capacity 4,500 imp gal (20,000 l)
Boiler LMS type Garratt
Boiler pressure 190 psi (1.31 MPa)
Fire grate area 44.5 sq ft (4.13 m²)
Heating surface: Tubes & flues 1,954 sq ft (181.5 m²)
Heating surface: Firebox 183 sq ft (17.0 m²)
Superheater area 500 sq ft (46 m²) or 466 sq ft (43.3 m²)
Cylinders Four, outside
Cylinder size 18½×26 in (470×660 mm)
Valve gear Walschaerts, piston valves
Tractive effort 45,620 lbf (202.9 kN)
Retired 1955–1958

The London Midland and Scottish Railway (LMS) Garratt was a class of Garratt 2-6-0+0-6-2 steam locomotive designed for heavy freight. A total of 33 were built from 1927, making them the most numerous class of Garratt in Britain.

Contents

[edit] Overview

The LMS had been following the Midland Railway's "small engine policy" that led to most of the Toton (Nottinghamshire)-Brent (London) coal trains being double-headed by 0-6-0 locomotives. The LNER had introduced a solitary U1 2-8-0+0-8-2 Garratt in 1925 for banking work. It was realised that double heading was uneconomical so a double locomotive was ordered from Beyer, Peacock and Company. However, Derby insisted on fitting their standard axle boxes which frequently overheated on the LMS Class 4F 0-6-0 to the design and this was their principal weakness, resulting in the design not being successful. They were always heavy on coal and maintenance.

Three locomotives were built in April 1927 and the remaining 30 were built August – November 1930. All were built with straight sided bunkers but from 1931 the 1930 locomotives and the last of the 1927 trio were fitted with revolving coal bunkers. These were conical in shape and were revolved or oscillated by means of a small 2-cylinder steam engine. The revolving bunkers prevented coal dust from entering the cab and the oscillation facility made them self-trimming.

Originally number 4967-4999 the numbering was unusual in that the 1930 builds preceded those of 1927. They were later renumbered 7967-7999 in the same order to make way for the new Black 5’s . British Railways added 40000 to their numbers.

The roundhouses at Toton MPD had to have extra length Garratt roads to accommodate them. Mostly used for heavy coal trains, they later found other uses as well. Others were allocated to Wellingborough and Hasland near Chesterfield. Trains for Manchester were generally routed along the Hope Valley Line. A few would work the route from Pye Bridge, near Ironville, through Ambergate, but only as far Rowsley, where the train would be split. This was normal for goods trains because of the danger of couplings breaking on the climb to Peak Forest. Also, although they had ample tractive effort to climb the gradient, in the days before goods wagons were braked, there were problems on the way down into Chinley. On an early attempt, the loco was inspected at Heaton Mersey and it was found that all of its brake blocks had melted.

The class was withdrawn between June 1955 and April 1958. None has survived into preservation.


[edit] Technical

  • Power Classification: Not classified
  • Introduced: 1927-1930
  • Designer: Sir Henry Fowler & Beyer, Peacock and Company
  • Weights:
    • Loco - 148 t 15 cwt (Fixed Bunker), 155 t 10 cwt (Rotary Bunker)
  • Driving Wheel: 5 ft 3 in
  • Boiler pressure: 190 psi superheated
  • Cylinders (4): 16½ × 26 in (Outside)
  • Tractive Effort: 45,620 lbf
  • Valve Gear: Walschaert (piston valves)


[edit] Photo Links


[edit] References

  • Bob Essery & G. Toms (1998) LMS & LNER Garratts Wild Swan ISBN 0-906867-93-2
  • Pixton, B., (2000) North Midland: Portrait of a Famous Route, Cheltenham: Runpast Publishing
  • Bentley, C., (1997) British Railways Operating History: Volume one, The Peak District, Carnarvon: XPress Publishing.
  • Hugh Longworth British Railway Steam Locomotives 1948-1968 - OPC - ISBN 0-86093-593-0

[edit] External links


v • d • e
London, Midland and Scottish Railway locomotives
Hughes:
Fowler:
Stanier:
Kitson:
Fairburn:
Ivatt:
British Railways steam locomotives · GWR locomotives · LMS locomotives · LNER locomotives · Southern Railway locomotives