List of DIN standards
From Wikipedia, the free encyclopedia
This list is incomplete; you can help by expanding it.
This is a list of DIN standards.
Contents |
[edit] DIN 1 to DIN 999
[edit] DIN 1 to DIN 99
- DIN 1: Taper pin? (ISO 2239, EN 2239, EN ISO 2239, DIN EN 2239, DIN ISO 2239, DIN EN ISO 2239)
- DIN 3: Standard mass?
- DIN 5: Axonometric projection? (ISO 5456, ISO 5456-3, DIN ISO 5456, DIN ISO 5456-3)
- DIN 6: Representations in normal projection? (ISO 128, DIN ISO 128)
- DIN 7: Parallel pin? (ISO 2338, EN 2338, EN ISO 2338, DIN EN 2338, DIN ISO 2338, DIN EN ISO 2338)
- DIN 11: Whitworth screw thread?
- DIN 13: Metric screw thread?
- DIN 95
- DIN 96
[edit] DIN 100 to DIN 199
- DIN 105: Size formats of wall bricks?
- DIN 125 Flat washers
- DIN 127 Lock washers
[edit] DIN 200 to DIN 299
- DIN 201
- DIN 276: Calculation of costs in structural engineering
[edit] DIN 300 to DIN 399
- DIN 323 defines preferred numbers
- DIN 332
[edit] DIN 400 to DIN 499
- DIN 406
- DIN 461
- DIN 476: Paper sizes (ISO 216, EN 216, EN ISO 216, DIN EN 216, DIN ISO 216, DIN EN ISO 216)*
[edit] DIN 600 to DIN 699
- DIN 678
[edit] DIN 700 to DIN 799
- DIN 763 Long link metal chain
- DIN 764 Half-long link metal chain
- DIN 766 Short link metal chain
[edit] DIN 800 to DIN 899
- DIN 820
- DIN 824
- DIN 899 Wrenches torque tested
[edit] DIN 900to DIN 999
- DIN 912 Socket head capscrews (normally GR 12.9 and coarse thread)
- DIN 913 Studs
- DIN 916 Socket setscrews (normally GR 12.9 and coarse thread)
- DIN 930 Fine thread pitch partially threaded
- DIN 931 Coarse thread pitch partially threaded
- DIN 933 Coarse thread pitch fully threaded
- DIN 934 Hex nuts
- DIN 946: Determination of coefficient of friction of bolt/nut assenblies under specified conditions.
- DIN 961 Fine thread pitch fully threaded
- DIN 965 Flat head Phillips drive zinc plated
- DIN 975 All threaded rod (normally 1 meter lengths, specify grade and pitch)
- DIN 985 Nylon insert locknuts
- DIN 980V All metal locknuts
[edit] DIN 1000 to DIN 9999
[edit] DIN 1000 to DIN 1999
- DIN 1301
- DIN 1302
- DIN 1304
- DIN 1311
- DIN 1313
- DIN 1315
- DIN 1318
- DIN 1319
- DIN 1320
- DIN 1324
- DIN 1325
- DIN 1332
- DIN 1333
- DIN 1338
- DIN 1339
- DIN 1355
- DIN 1357
- DIN 1421
- DIN 1422
- DIN 1451: A typeface used by German railways and on traffic signs
- DIN 1463
- DIN 1505
- DIN 1511: Patterns, pattern equipment and core boxes for the production of sand molds and sand core (superseded by EN 12890)
- DIN 1530: Standard for Ejector pins used in injection moulds
- DIN 1707
- DIN 1786: Detection of irradiated food containing bone, by ESR spectroscopy (EN 1786, DIN EN 1786)*
- DIN 1960
- DIN 1961
[edit] DIN 2000 to DIN 2999
- DIN 2112
- DIN 2127
- DIN 2137
- DIN 2342
- DIN 2448 Dimensions of plain-end seamless steel pipes
- DIN 2527 Blind flange
- DIN 2860
- DIN 2999 Whitworth Tapered Pipe Thread, British Standard Tapered Pipe (BSPT)
- DIN 2391 Seamless precision steel tube sizes
[edit] DIN 4000 to DIN 4999
- DIN 4102
- DIN 4108: Thermal insulation and energy economy in buildings*
- DIN 4150
- DIN 45323: Connectors for coupling an external low-voltage power to portable entertainment equipment (describes at least two DC coaxial power plugs)
- DIN 4701: Energy efficiency of heating and ventilation systems in buildings*
- DIN 4710: Statistics on German meteorological data for calculating the energy requirements for heating and air conditioning equipment*
[edit] DIN 5000 to DIN 5999
- DIN 5008
- DIN 5031
- DIN 5035: Artificial lighting*
- DIN 5145
- DIN 5146
- DIN 5474
- DIN 5475
- DIN 5483
- DIN 5486
- DIN 5487
- DIN 5489
- DIN 5493
[edit] DIN 6000 to DIN 6999
- DIN 6738: Paper standard tests the effects of aging on paper.
- DIN 6776
- DIN 6779: Marking systematics for technical products and technical product documentation
- DIN 6885
[edit] DIN 7000 to DIN 7999
- DIN 7245
- DIN 7500 thread rolling screws.
- DIN 7985 cross head, phillips head or posi-drive pan-head set screw.
[edit] DIN 8000 to DIN 8999
- DIN 8513
- DIN 8580
- DIN 8806
[edit] DIN 10000 to DIN 19999
[edit] DIN 10000 to DIN 10999
- DIN 10289: Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates; or external liquid applied epoxy and epoxy-modified coatings used on steel tubes and fittings for onshore and offshore pipelines (ISO 10289, EN 10289, DIN EN 10289, EN ISO 10289, DIN EN ISO 10289)*
- DIN 10504: Lamps for the lighting of meat and meat products*
[edit] DIN 11000 to DIN 11999
- DIN 11850: Tubes for the food, chemical and pharmaceutical industry - Stainless steel tubes - Dimensions, materials
[edit] DIN 12000 to DIN 12999
- DIN 12950
[edit] DIN 13000 to DIN 13999
- DIN 13080
- DIN 13260
- DIN 13523: "Coating thickness, specular gloss and color difference" of coil coating metals
[edit] DIN 14000 to DIN 14999
- DIN 14090
- DIN 14096
- DIN 14210
- DIN 14406
- DIN 14503
- DIN 14505
- DIN 14507
- DIN 14520
- DIN 14521
- DIN 14530
- DIN 14555
- DIN 14565
- DIN 14701
- DIN 14702
- DIN 14703
- DIN 14710
- DIN 14711
- DIN 14713
- DIN 14714
- DIN 14715
[edit] DIN 15000 to DIN 15999
- DIN 15018-2: Cranes; steel structures; principles of design and construction*
- DIN 15720: Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography (ISO 15720, EN ISO 15720, DIN ISO 15720, DIN EN ISO 15720)*
- DIN 15721: Dimensions of the projection reel for 70 mm film*
[edit] DIN 16000 to DIN 16999
- DIN 16518
- DIN 16892: General requirements and testing for cross-linked polyethylene (PE-X) pipes*
- DIN 16893: Dimensions for crosslinked polyethylene (PE-X) pipes*
[edit] DIN 17000 to DIN 17999
- DIN 17410
- DIN 17471
[edit] DIN 18000 to DIN 18999
- DIN 18012
- DIN 18013
- DIN 18014
- DIN 18015
- DIN 18022
- DIN 18024
- DIN 18065
- DIN 18379: Contract procedures for building works*
- DIN 18382
- DIN 18384
[edit] DIN 19000 to DIN 19999
- DIN V 19222: Control technology - Terminology
- DIN 19225: Measurement and control; terminology and classification of controllers
- DIN 19226
- DIN 19227: Control technology; graphical symbols and identifying letters for process control engineering
- DIN 19237
- DIN 19277
- DIN 19533: Piping?*
- DIN 19704: Hydraulic Steel Structures
[edit] DIN 20000 to DIN 29999
[edit] DIN 24000 to DIN 24999
- DIN 24190: Folded and welded rectangular sheet metal ducts for ventilation and air conditioning*
- DIN 24340-2: Hydraulic valves; mounting surfaces and connecting plates for directional control valves
[edit] DIN 28000 to DIN 28999
- DIN 28610: Piping?*
[edit] DIN 30000 to DIN 39999
- DIN 30722: Roller contact tipper vehicles, roller containers
[edit] DIN 31000 to DIN 31999
- DIN 31635: Transliteration of the Arabic language*
[edit] DIN 40000 to DIN 49999
- DIN 40015
- DIN 40020
- DIN 40050
- DIN 40101
- DIN 40108
- DIN 40110
- DIN 40146
- DIN 40148
- DIN 40200
- DIN 41215
- DIN 41301
- DIN 41309: Magnetic values for transformer laminations
- DIN 41426
- DIN 41429
- DIN 41524
- DIN 41527: DIN connectors?*
- DIN 41612: Connectors for rack based systems
- DIN 41652: (D-subminiature connectors)
- DIN 41750
- DIN 41782
- DIN 41786
- DIN 41855
- DIN 41868
- DIN 41869
- DIN 41873
- DIN 41876
- DIN 42400
- DIN 42402
- DIN 42403
- DIN 42673
- DIN 42676
- DIN 42961
- DIN 42973
- DIN 43700: Panel meter enclosures
- DIN 43780
- DIN 43802
- DIN 43807
- DIN 43856
- DIN 43865
- DIN 43870
- DIN 44070
- DIN 44080
- DIN 44300
- DIN 45322: DIN connectors?*
- DIN 45500: Hi-Fi Minimum Specifications*
- DIN 45507: Wow and Flutter measurement
- DIN 45539: Rumble Measurement on Vinyl Recordings
- DIN 45596: Phantom Powering Specifications on Condenser Microphones
- DIN 46400
- DIN 47100
- DIN 47301
- DIN 48803
- DIN 48830
[edit] DIN 50000 to DIN 59999
- DIN 51501 Standard lubricating oils
- DIN 51504 Lubricating oils D
- DIN 52368 Formaldehyde emission level standard
- DIN 53150 Paints and varnishes — Determination of the drying stage of coatings (modified
Bandow-Wolff method)
- DIN 53575
- DIN 55003
- DIN 58810 Bone Screw thread (For surgical implants, internal and external thread)
- DIN 58888 RMS thread 55 degree thread angle (objective for microscope)
[edit] DIN 60000 to DIN 69999
- DIN 62056: Electric metering
- DIN 66000: Switching algebra, mathematical signs and symbols
- DIN 66001: Graphical symbols and their application
- DIN 66002: Handwriting of the digit 0 and of the upper case letter O
- DIN 66003: 7-Bit ASCII code, a.k.a ISO 646-DE
- DIN 66004: Coding on data media; representation of 7-bit code character sets
- DIN 66005: Representation of packed numerics and binary data recorded on 9 tracks on magnetic tape 12
- DIN 66006: Standardized representation of ALGOL programs on paper tapes and punch cards, so that these programs can be exchanged between different data-processing systems. A.k.a. ALCOR
- DIN 66007: A magnetic ink font. Covers 10 numbers, 26 capital letters and 5 auxiliary characters. A.k.a CMC-7
- DIN 66008
- DIN 66009
- DIN 66020
- DIN 66021
- DIN 66025
- DIN 66027: FORTRAN
- DIN 66215
- DIN 66234
- DIN 66255: PL/1
- DIN 66256: PASCAL
- DIN 66257
- DIN 66258
- DIN 66261
- DIN 66264
- DIN 66303: 8-Bit ASCII code
- DIN 66304
- DIN 60455: Resin based reactive compounds used for electrical insulation
- DIN 69901
[edit] DIN 70000 to DIN 79999
- DIN 72552: Electric terminal numbers in automobiles*
- DIN 75490: Standard size for car audio head units?*