Liquid gas
From Wikipedia, the free encyclopedia
This article or section is in need of attention from an expert on the subject. Please help recruit one or improve this article yourself. See the talk page for details. Please consider using {{Expert-subject}} to associate this request with a WikiProject |
This article or section needs to be updated. Please update the article to reflect recent events / newly available information, and remove this template when finished. |
Due to the age of this content, you may be looking for:
- liquid oxygen
- liquid nitrogen
- paramagnetism (oxygen)
- superconducting metals
- ferromagnetism (magnets)
- liquified petroleum gas
Contents |
[edit] In 1911
This article incorporates text from the Encyclopædia Britannica Eleventh Edition, a publication now in the public domain.
Liquid gas: Low temperatures have very marked effects upon the magnetic properties of various substances. Oxygen, long known to be slightly magnetic in the gaseous state, is powerfully attracted in the liquid condition by a magnet, and the same is true, though to a less extent, of liquid air, owing to the proportion of liquid oxygen it contains. A magnet of ordinary carbon steel has its magnetic moment temporarily increased by cooling, that is, after it has been brought to a permanent magnetic condition ( aged ). The effect of the first immersion of such a magnet in liquid air is a large diminution in its magnetic moment, which decreases still further when it is allowed to warm up to ordinary temperatures. A second cooling, however, increases the magnetic moment, which is again decreased by warming, and after a few repetitions of this cycle of cooling and heating the steel is brought into a condition such that its magnetic moment at the temperature of liquid air is greater by a constant percentage than it is at the ordinary temperature of the air. The increase of magnetic moment seems then to have reached a limit, because on further cooling to the temperature of liquid hydrogen hardly any further increase is observed. The percentage differs with the composition of the steel and with its physical condition. It is greater, for example, with a specimen tempered very soft than it is with another specimen of the same steel tempered glass hard.
Aluminium steels show the same kind of phenomena as carbon ones, and the same may be said of chrome steels in the permanent condition, though the effect of the first cooling with them is a slight increase of magnetic moment. Nickel steels present some curious phenomena. When containing small percentages of nickel (e.g. 084 or 3-82), they behave under changes of temperature much like carbon steel. With a sample containing 7.65%, the phenomena after the permanent state had been reached were similar, but the first cooling produced a slight increase in magnetic moment. But steels containing 18-64 and 29% of nickel behaved very differently. The result of the first cooling was a reduction of the magnetic moment, to the extent of nearly 50% in the case of the former. Warming again brought about an increase, and the final condition was that at the barometric pressure of liquid air the magnetic moment was always less than at ordinary temperatures. This anomaly is all the more remarkable in that the behaviour of pure nickel is normal, as also appears to be generally the case with soft and hard iron. Silicon, tungsten and manganese steels are also substantially normal in their behaviour, although there are considerable differences in the magnitudes of the variations they display.
[edit] Temperature
Low temperatures also affect the permeability of iron, i.e. the degree of magnetization it is capable of acquiring under the influence of a certain magnetic force. With fine Swedish iron, carefully annealed, the permeability is slightly. Hard iron, however, in the same circumstances suffers a large increase of permeability.
[edit] Liquid air
At the Lister Institute of Preventive Medicine, liquid air has been brought into use as an agent in biological research. An inquiry into the intracellular constituents of the typhoid bacillus, initiated under the direction of Dr Allan Macfadyen, necessitated the separation of the cell-plasma of the organism. The method at first adopted for the disintegration of the bacteria was to mix them with silver-sand and churn the whole up in a closed vessel in which a series of horizontal vanes revolved at a high speed. But certain disadvantages attached to this procedure, and accordingly some means was sought to do away with the sand and triturate the bacilli per se. This was found in liquid air, which, as had long before been shown at the Royal Institution, has the power of reducing materials like grass or the leaves of plants to such a state of brittleness that they can easily be powdered in a mortar. By its aid a complete trituration of the typhoid bacilli has been accomplished at the Jenner Institute, and the same process, already applied with success also to yeast cells and animal cells, is being extended in other directions.
When air is liquefied the oxygen and nitrogen are condensed simultaneously. However, owing to its greater volatility the latter boils off the more quickly of the two, so that the remaining liquid becomes gradually richer and richer in oxygen.
[edit] Liquefied natural gas
Liquefied natural gas is the different physical form of Natural gas. Since transportation of natural gas requires a large network of pipeline which is difficult across some terrains and oceans, and also need huge investment and long term planning. So the natural gas is liquefied, put under high pressure which transforms it into liquid. The liquefied gas is transported through Tankers with special air tight compartments. When the tank is opened and the liquid exposed to atmospheric pressure it spontaneously transforms into gas.
[edit] See also
- liquid oxygen
- liquid nitrogen
- paramagnetism (oxygen)
- superconducting metals
- ferromagnetism (magnets)
- liquified petroleum gas