Libyan Iron and Steel Company

From Wikipedia, the free encyclopedia

الشركة الليبية الحديد و الصلب‎
Libyan Iron and Steel Company
Type State-owned
Founded September 18, 1979
Headquarters Misurata, Flag of Libya Libya
Key people Mohamed Elmabruk (Chairman)
Mohammad Zidan (General Manager)
Ali M. Shtewi (Operations Manager)
Industry Steelmaking
Products Steel
Concrete slab
Reinforced Steel
Hot-Briquetted Iron
Sponge iron
Rods & Bars
Services Hot briquetting of direct reduced iron (DRI)
Revenue ▲$250 million (2005)
Employees 6,500 (2006)
Parent Libyan Government
Website libyansteel.com

The Libyan Iron and Steel Company (Lisco) is one of the largest iron and steelmaking companies operating in North Africa. Based in Misurata, it is subsidized and owned by the Libyan government. Colonel Muammar al-Gaddafi officially laid Lisco's foundation stone on September 18, 1979. In 2004, the online magazine Arab Steel ranked Lisco ranked third among the largest Arab iron and steel companies.

Contents

[edit] Overview

Lisco is among the largest companies in Libya, having an annual production capacity of approximately 1,324,000 tons of liquid steel.[1] Lisco’s operations are primarily supplied by imported steel pellets from Brazil, Canada, and Sweden for use as raw materials.[2] Natural gas is used to manufacture sponge iron and hot briquette iron. Hot-briquetted iron (HBI) became a significant Libyan mineral export since the LISCO II plant began producing it in 1997. About 54% of Lisco’s exports (by weight) in 2000 was HBI. Bars and rods shipped to Egypt and Tunisia accounted for about 23% of the company’s exports.[3] Lisco has its own captive port with specialized facilities, such as a telescopic ship-loading conveyor for loading HBI into ships. The conveying system extends from the HBI plant to the port, about 1,500 meters away.[4]

Most of Lisco's rebar production is sold locally, with the domestic industry consuming about 25% of the company's flat steel products. Lisco exports over 60% of its product, with roughly 50% directed to markets in Italy and Spain. The rest go to other European countries (France, Greece and Turkey), Middle Eastern countries (Egypt, Tunisia, Morocco, and Jordan) and also to China. In 2003, the company produced 835kt[5] of long and flat steel products, of which 49% was exported. Lisco also exported 339kt of its 412kt HBI production.[6] In 2004, Lisco started exporting about 60,000 tons of HBI to the United States through an Italian company called Techint. Lisco’s biggest local client is the General Company for Piping, based in Benghazi.[7] The remainder goes to the private sector and petroleum companies, like the National Oil Corporation. Production costs increased during 2005 due to a substantial increase in the price of imported steel pellets, however the price of Lisco’s final products declined 40%.

[edit] Facilities

Facility Location Capacity Commodity Established
LISCO I Misurata (2) 550,000 Midrex DR modules[8] sponge iron 1989
LISCO II Misurata 650,000 Midrex DR[9] module Hot-briquetted iron 1997
Steel Melt Shop (1) Misurata 630,000 Billets & Blooms
Steel Melt Shop (2) Misurata 611,000 Slabs
Bar & Rod Mill Misurata 800,000 Bars & Rods
Light & Medium Section Mill Misurata 120,000 Light & Medium Section
Hot Strip Mill Misurata 580,000 Hot rolled Coils & Sheets
Cold rolling Mill Misurata 140,000 Cold rolled Coils & Sheets
Galvanizing Line Misurata 80,000 Galvanized Coils & Sheets
Continuous Coating Line Misurata 40,000 Coated Coils & Sheets
Six electric arc furnaces Misurata 1.25 mill Liquid steel

Notes:
1. Capacity in Tons per year (t/yr).

[edit] Expansion & Development

White-hot steel pouring out of an electric arc furnace.
White-hot steel pouring out of an electric arc furnace.

In 2001, the Libyan government proposed several state-company projects for which joint ventures would be considered. This included a $20 million modification of Lisco’s electric arc furnace as well as construction and installation of a $17 million ladle furnace. The Government also promoted development of numerous mineral deposits, including clay, gypsum, iron, lead, salt, sodium carbonate, and stone.[10] Additionally, projects were initiated for quarrying limestone and dolomite and manufacturing lime and calcined dolomite for Lisco’s As Seddadah facility, 125-km southwest of Misurata.[11] In 2004, Lisco signed a loan contract to develop LISCO I aimed at boosting capacity from 674kt of liquid steel per year to 1.100kt. This project is the first stage to raise capacity of LISCO I and II. In 2006, Lisco initiated an ambitious project aiming to double design capacity to 2.5 million tons by further developing facilities on the 4.5 square mile plant near Misurata. Lisco signed a loan contract with one foreign partner, and the project was expected to be finalized in 2006. The Islamic Bank in Jeddah, Saudi Arabia, partially financed the project's cost, with Lisco supplying the remaining amount. On April 2, 2007, Lisco signed financing agreements with five Libyan banking institutions (Sahara Bank, Aljamhoria, Attejari, Alomma and Alwahda) for 840 million Libyan dinars ($650 million) to execute another phase of their expansion plan. Lending his support, Libya's Secretary of Minerals & Industry, Ali Yusuf Zikri, said the loan should help create new employment opportunities and meet increasing local demand.

[edit] Production Performance

A tied rebar beam cage. This will be embedded inside of cast concrete to lend it strength.
A tied rebar beam cage. This will be embedded inside of cast concrete to lend it strength.

In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. Rebar was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the Popular Committee, Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the Al-Fatah Revolution in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.[12] Production of both long and flat products was 1.070 tons in 2006. Flat products achieved a new output record for the company of 564kt, 13% higher than 2005. Production of bars and rods was 26% lower than 2005. Long product sales were 642kt in 2006, a sizeable increase from 634kt in 2005, forcing the company to import 168kt of long products, mostly from Ukraine.

[edit] Exports

In 2003, Lisco exported 373kt of finished products (48.5% of production). 881kt of various products were exported in 2004, including 477kt of HBI (54% of exports) and 72kt of rebar. It is considered the only Arab company manufacturing this material. Flat products were 59% of exports in 2004. Europe received about 64.4% followed by Asian and Arab countries. Higher domestic demand for rebar resulted in exports declining to 20kt in 2004. Exports in the first half of 2005 was approximately 384kt; mostly HBI (54%) and flat products (31.7%). Exports fell for long products (81%), flat products (20%) and HBI (5%). This drop is due to the fact that the company stopped exporting rebar as well as a global recession, which led to a demand contraction for iron and steel products, particularly hot-rolled coils and HBI. Exports in 2006 exceeded one million tons, including 449kt of flat products. During the first quarter of 2006 Lisco increased hot-rolled coils exports by 125% and exported sponge iron for the first time.[13]

[edit] Domestic Sales

Lisco's sales for both long and flat products in the domestic market increased 96% during the first half of 2005. Most of this increase came from purchases of long products which grew to 329.039 tons a 10% increase on the preceding year; flat products increased 17%. During the first quarter of 2006, 145.7kt of rebar was sold domestically, a 9% increased compared to 1Q2005; additionally, domestic sales of hot-rolled coils increased 93 percent to 5.6kt. Higher domestic sales volume reflected a growing trend in the Libyan market's demand and consumption rates for steel products, especially for rebar, which amounted to 138.6kt.

[edit] Financial Performance

Increased demand for reinforced steel in the domestic market and higher prices for steel worldwide helped to boost the profits of the Libyan Iron and Steel Company to over 100 million Libyan dinars (USD $80.5 million) by the end of 2004.[14] The company’s return on export sales in 2003 was $165 million, it rose to $275 million in 2004 and reached $250 million by 2005. Revenue from operating activities increased from approximately $300 million in 2003 to more than $435 million in 2004. According to Lisco's Chairman Mohamed Elmabruk, by the end of 2005, revenue had surpassed $400 million.[15]

[edit] See also

[edit] Notes

  1. ^ Africa Report Top Companies in Africa
  2. ^ P. Mobbs (2001) p.19.1
  3. ^ P. Mobbs (2001) p.19.1
  4. ^ Midrex Report 2006
  5. ^ KT = Kiloton, one thousand tons
  6. ^ P. Mobbs (2005)
  7. ^ General Piping Company website
  8. ^ MIDREX® DRI Series 500-Modules and one MIDREX HBI Series 500-Module
  9. ^ DRI - direct reduced iron
  10. ^ General Industrialization Corp. (2002a)
  11. ^ P. Mobbs (2001) p. 19.1
  12. ^ M.L. Lachge
    A tied rebar beam cage. This will be embedded inside of cast concrete to lend it strength.
    A tied rebar beam cage. This will be embedded inside of cast concrete to lend it strength.

    In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. Rebar was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the Popular Committee, Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the Al-Fatah Revolution in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [[Image:trebar.jpg|thumb|right|A tied rebar beam cage. This will be embedded inside of cast [[concrete]] to lend it strength.]] In 2003, Lisco produced 835kt of long and flat products (444kt long products; 391kt of flat products), including 412kt of rebar, 391kt of hot-rolled coils, and 412kt of HBI. Production of long and flat products grew 18% in 2004; mainly rebar (460kt); hot-rolled coils (429kt) and HBI (606kt). Lisco produced over 574KT of finished products in the first half of 2005, increasing 65% over the first half of 2004. The company also increased liquid steel production 52%. [[Rebar]] was 57.3% of finished products, hot-rolled coils was 39.3%. Sponge iron production was 579.407 tons, 348.243 tons of HBI, 376.239 tons of billets and blooms and 281.832 tons of slabs. During the first nine months of 2005, Lisco reached its highest production ever; 1 million tons of liquid steel. This was confirmed by Secretary of the [[General People's Committee of Libya|Popular Committee]], Dr. Mohammad Abu Ojeila Al-Mabrouk at celebrations in September 2005 on the occasion of the passage of 15 years since the company’s mills began production, which concurs with the anniversary of the ''[[September 1|Al-Fatah Revolution]]'' in Libya. In 2005, Lisco achieved the highest rate of increase in steel production among Arab companies, which amounted to 34.8%. Its production increased by 65% in the period from January to June 2005 compared with the same period of 2004.<ref>M.L. Lachge [http://www.steelworld.com/feature0506.pdf ''Arab Steel Producers 2005'']</li> <li id="cite_note-12">'''[[#cite_ref-12|^]]''' according to a statement by General Manager Dr. Mohammad Zidan in [http://www.arabsteel.info/total/Long_News_Total_e.asp?ID=53 ''Arab Steel magazine'']</li> <li id="cite_note-13">'''[[#cite_ref-13|^]]''' ''[[The New York Times]]'' [http://www.summitreports.com/pdfs/libya2.pdf ''Steelmaker moves from strength to strength''] July 10, 2005</li>

    <li id="cite_note-14">'''[[#cite_ref-14|^]]''' Mohamed Elmabruk Interview (2006)</li></ol></ref>

[edit] References