Leicaflex

From Wikipedia, the free encyclopedia

Leicaflex
Type 35 mm SLR camera
Lens mount Leica R bayonet
Focus manual
Exposure manual
Flash hot shoe

The Leicaflex was the first series of 35mm single-lens reflex (SLR) cameras manufactured by Leitz. The Leicaflexes were fully mechanical cameras marketed between 1964 and 1976, in response to the rapid increase in popularity and usability of SLRs during this period. They were extremely durable, and superbly finished, but their appeal was limited by their failure to keep pace with the state of the art in SLR design, their somewhat limited selection of accessories, and their extremely high price in comparison with their Japanese competitors. They were ultimately replaced by the R series Leicas developed by Leitz with the assistance of Minolta under a cooperation agreement between the two companies.


Contents

[edit] The Leicaflex

Template:Flickr image Leitz was a reluctant entrant into the SLR market. At the beginning of the 1960s, the only still cameras manufactured by Leitz were 35mm rangefinders, a camera design that its Japanese competitors, most notably Nippon Kōgaku (Nikon), were beginning to abandon in favor of SLR designs. The company's management continued to believe in the inherent advantages of the rangefinder design over the SLR, but in view of the steady shift in market share from rangefinders to SLRs such as the Nikon F, the Asahi Pentax and the SR-series Minolta in the early 1960s, and the increasing prominence of high quality SLR cameras among professional photographers, it had little choice but to offer an SLR of its own. To compete in this market Leitz introduced a superbly finished, extremely solid and expensive SLR, called Leicaflex. Nowadays, this first Leicaflex model is generally referred to as the Original Leicaflex or Leicaflex Standard to distinguish it from the models that followed.

The Leicaflex lacked a few features present in the most advanced products of its time. It has been much criticized for omitting a through the lens (TTL) exposure meter of the type which had previously been incorporated into the Topcon RE Super and the Asahi Pentax Spotmatic, and which would soon appear in the Nikon F Photomic T, Canon Pellix and a number of other reflex cameras. It also lacked the interchangeable viewfinders offered for the Miranda, Canonflex, and Nikon F. Finally, the original Leicaflex featured a finder which, while offering a very bright aerial image, was not full focusing, offering only a small focusing zone at the center. The Leicaflex did offer mirror lock-up, and shutter speeds up to 1/2000 visible in the finder.

The camera introduced a new three lug bayonet mount. This mount remains substantially unchanged to the present day, although the mount has been developed in order to accommodate increased levels of automation. The Leicaflex / Leica R lenses were and continue to be superb optics, however Leica has always offered a more limited range of reflex lenses than its Japanese rivals. At the time of the introduction of the Leicaflex the range was limited to 35mm, 50mm, 90mm and 135mm focal lengths of moderate speed.

The original Leicaflex is readily identifiable from its CdS meter window and battery cover on the front of the prism housing just above the lens. It was offered in chrome and black enamel finishes, the latter being rare. Diehard collectors distinguish between the first series with a fan-shaped exposure counter window and a tripod socket attached by three screws, and the second series with a round exposure counter window, a tripod socket integrated in the bottom plate and a meter switch built in the advance lever. In use, the two series are virtually identical. 32,500 serial numbers were allotted to the original Leicaflex.[1]

[edit] The Leicaflex SL

In 1968, Leitz responded to the critics of the non-TTL meter of the original Leicaflex by introducing its successor the Leicaflex SL with a TTL meter. The SL designation in the name was an abbreviation of "Selective Light", the name chosen by Leitz for its implementation of TTL metering. This system metered a limited area represented by the viewfinder's central microprism spot. At a time when SLR manufacturers were divided between those embracing TTL metering at full aperture (such as Nikon and Konica, and those with mounts which permitted only stop-down metering (such as Pentax and Canon), Leitz chose to implement full aperture metering on the Leicaflex SL.

Leitz also addressed complaints about the original Leicaflex focusing screen in the SL focusing screen, which offered a ground-glass focusing screen with a central microprism spot. This more conventional configuration did not prevent it from being very bright and comfortable. In fact, the brightness of the SL viewfinder remains unsurpassed up to the present day.

The Leicaflex SL replaced the mirror lock-up function of the original Leicaflex with a depth of field preview. The principal effect of this change was to obsolete the rangefinder-derived 21mm f/3.4 Schneider Super-Angulon lens which, due to the protrusion of the rear element into the camera body, was designed to work with the mirror locked up in conjunction with an external viewfinder. This lens cannot be mounted on the SL or its followers without mirror lockup. The original Leicaflex Super-Angulon was replaced by the retrofocus type 21mm f/4 Super-Angulon, which can be mounted in the conventional way.

The Leicaflex SL is identifiable by the letters "SL" on the front of the prism housing, which replaced the meter window and battery cover of the original Leicaflex. It was offered in chrome as well as black finish. Black SLs initially bore a black enamel finish, which was subsequently replaced by a more durable "black chrome" finish. 70,995 serial numbers were allotted to the Leicaflex SL.[2]

In 1972, for the Olympic Games in Munich, an edition of 1,000 was made in chrome with special markings (the five rings, the year 72 and a three digit number).[3]

Some Leicaflex SL for the US Navy were engraved NAVY on the bottom plate.[4] They are reported at least in black enamel and black chrome.

On occasions, you can find a dummy Leicaflex SL with a dummy 50mm f/2 Summicron standard lens. This was a display object and demonstration model for retailers, and is called Attrappe in German. They did not have a serial number.

[edit] The Leicaflex SL Mot

The Leicaflex SL Mot was a variant of the Leicaflex SL that could take a motor drive, and lacked the self-timer and the meter switch in the advance lever. The SL Mot was mostly produced in black enamel and later black chrome, but chrome examples do exist.[5] The motor drive was as large as the camera body itself, marked LEICAFLEX MOTOR, and was probably only made in black. 980 serial numbers were allotted to the Leicaflex SL Mot.[6] It seems that some were used by the NASA and have NASA engravings.[7]

[edit] The Leicaflex SL2

Leicaflex SL2
Leicaflex SL2

Leitz modified the Leicaflex SL in 1974 to create the Leicaflex SL2. The modifications were relatively minor:

  • addition of an aperture read-out in the finder
  • viewfinder illumination, with an additional battery compartment at the front of the camera
  • hot shoe
  • more sensitive exposure meter
  • modified mirror mechanism, to accept new wide-angle lenses that cannot be mounted on the previous bodies (16mm f/2.8 Fisheye Elmarit-R, 19mm f/2.8 Elmarit-R and 24mm f/2.8 Elmarit-R)
  • minor cosmetic details, like the position of the battery tester

The Leicaflex SL2 was produced in chrome and in black chrome finish. 24,555 serial numbers were allotted for the SL2, but among them were some SL2 Mot.[8] Some SL2s received special Leica 50 Jahre markings in 1975, to commemorate the 50th anniversary of the introduction of the first Leica.

Production of the SL2 ended in 1976, at which time it was replaced by the Leica R3, a product of the cooperation agreement between Leitz and Minolta. The R3 offered an electronic shutter and exposure automation in a camera body which shared little in common with the Leicaflex models, apart from its lens mount. The SL2 was ultimately a victim of economic reality. Although the official price of the SL2 camera body was approximately double that of the contemporary Nikon F2 Photomic (approximately $1600 vs. $830 in 1975), Leitz nevertheless lost money on each camera produced, due largely to the cost of producing the high specification shutter. Such losses were unsustainable given the financial crisis facing Leitz in the mid-1970s.

The Leicaflex SL2 was the last all-mechanical Leica reflex body for several years, before the advent of the R6. It was also the final Leica SLR to show no Minolta influence prior to the introduction of the Leica R8 in 1996. This and its relative rarity compared to the SL have driven the prices quite high. In terms of usability and price, the Leicaflex SL in good condition is likely to be the best compromise among this series of cameras for today's user.

[edit] The Leicaflex SL2 Mot

As with the SL, a motorized version of the SL2 called Leicaflex SL2 Mot was made, only in black, with the provision to accept a motor drive, common with the SL Mot. 1,020 serial numbers were allotted to the SL2 Mot, plus some that were made in batches allotted to the SL2.[9]

[edit] Leicaflex Lens Modifications

While the addition of full aperture TTL metering on the Leicaflex SL was good from a usability standpoint, an unfortunate result was that Leitz had to make a slight modification to the lens mount, by adding a new cam to communicate aperture information from the lens to the body. The lenses for the original Leicaflex are therefore referred to as "one-cam" lenses, while those for the SL and the later SL2 are referred to as "two-cam" lenses. Leitz subsequently added a third cam to permit automation with the Leica R3 and later cameras, giving rise to "three-cam" lenses. All the lenses are mechanically similar and can mount on older or newer bodies, with a few exceptions, although the older lenses cannot use the full potential of the exposure metering systems and automation offered by the later bodies. To this day, however, Leica and its service agents offer a service to add the second and third cams to older lenses to permit compatibility with more recent reflex models.

[edit] Accessories

  • Motor drive for the Leicaflex SL Mot and SL2 Mot, named Leicaflex Motor
  • Eveready case 14557
  • Eveready bags

[edit] Notes

  1. ^ List of serial numbers at Cameraquest.
  2. ^ List of serial numbers at Cameraquest.
  3. ^ 1,000 examples: this page at KB Camera.
  4. ^ See for example the pictures in this Chinese forum.
  5. ^ See the picture of a chrome Leicaflex SL Mot in this page by Doug Herr.
  6. ^ List of serial numbers at Cameraquest.
  7. ^ See this page at Map Camera Museum.
  8. ^ List of serial numbers at Cameraquest.
  9. ^ List of serial numbers at Cameraquest.


[edit] External links

[edit] User manuals

[edit] Other

[edit] Sources and references


This article was originally based on "Leicaflex" in Camerapedia, retrieved at an unknown date under the GNU Free Documentation License.