Lambda diode
From Wikipedia, the free encyclopedia
A Lambda diode is an electronic circuit that combines a complementary pair of field-effect transistors into a two-terminal device that exhibits an area of differential negative resistance much like a tunnel diode. The term refers to the shape of the V/I curve of the device, which resembles the Greek letter λ (lambda).
Lambda diodes work at higher voltage than tunnel diodes. Whereas a typical tunnel diode[1] may exhibit negative differential resistance between some 70mV - 350 mV, this region occurs between about 1.5V - 6V in a lambda diode due to the higher pinch-off voltages of typical JFET devices. A lambda diode can therefore not replace a tunnel diode directly.
Moreover, in a tunnel diode the current reaches a minimum of some 20% of the peak current before rising again towards higher voltages. The lambda diode current approaches zero as voltage increases, before rising quickly again at a voltage high enough to cause gate-source zener breakdown in the FETs.
It is also possible to construct a device similar to a lambda diode by combining an n-channel JFET with a PNP bipolar transistor[2].
[edit] Applications
Like the tunnel diode, the negative resistance aspect of the lambda diode lends itself naturally to application in oscillator circuits[3] and amplifiers. In addition, bistable circuits such as memory cells have been described[4].
[edit] References
- ^ 1N3712 data sheet
- ^ Oscillations and Regenerative Amplification using Negative Resistance
- ^ A Dip Meter Using the Lambda Negative Resistance Circuit. Lloyd Butler, Amateur Radio, January 1997.
- ^ United States Patent 4376986: Double Lambda diode memory cell; http://www.wipo.int/pctdb/images4/PCT-PAGES/1983/091983/83001335/83001335.pdf
- Rudolf F. Graf, Modern Dictionary of Electronics, 7th ed. P.411. Boston [etc.]: Newnes Press, 1999. ISBN 0-7506-9866-7
