Image:KSC-99PP-0237.jpg

From Wikipedia, the free encyclopedia

• Image
• File history
• File links

Size of this preview: 800 × 544 pixels
Full resolution‎ (2,617 × 1,779 pixels, file size: 1.63 MB, MIME type: image/jpeg)

This file is in the public domain because it was created by NASA. NASA copyright policy states that "NASA material is not protected by copyright unless noted". (NASA copyright policy page or JPL Image Use Policy) Warnings: Use of NASA logos, insignia and emblems are restricted per US law 14 CFR 1221. The NASA website hosts a large number of images from the Soviet/Russian space agency, and other non-American space agencies. These are not in the public domain. Materials from the Hubble Space Telescope may be copyrighted if they do not explicitly come from the STScI. [1] All materials created by the SOHO probe are copyrighted and require permission for commercial non-educational use. [2] Images featured on the Astronomy Picture of the Day (APOD) web site may be copyrighted. [3]

http://images.ksc.nasa.gov/photos/1999/captions/KSC-99PP-0237.html

Cutting a red ribbon for the unveiling of a newly renovated altitude chamber are (left to right) Tommy Mack, project manager, NASA; Steve Francois, director, Space Station and Shuttle Payloads; Sterling Walker, director, Engineering Development; Roy Bridges, director, Kennedy Space Center; Jay Greene, International Space Station manager for Technical; Michael Terry, project manager, Boeing; and Terry Smith, director of Engineering, Boeing Space Coast Operations. The chamber was reactivated, after a 24-year hiatus, to perform leak tests on International Space Station pressurized modules at the launch site. Originally, two chambers were built to test the Apollo command and lunar service modules. They were last used in 1975 during the Apollo-Soyuz Test Project. After installation of new vacuum pumping equipment and controls, a new control room, and a new rotation handling fixture, the chamber again became operational in February 1999. The chamber, which is 33 feet in diameter and 50 feet tall, is constructed of stainless steel. The first module that will be tested for leaks is the U.S. Laboratory. No date has been determined for the test.

Photo released February 25, 1999

File history

Click on a date/time to view the file as it appeared at that time.

• Search for duplicate files
• Edit this file using an external application

  See the setup instructions for more information.

File links