Joule heating

From Wikipedia, the free encyclopedia

Joule heating is the process by which the passage of an electric current through a conductor releases heat. It was first studied by James Prescott Joule in 1841. Joule immersed a length of wire in a fixed mass of water and measured the temperature rise due to a known current flowing through the wire for a 30 minute period. By varying the current and the length of the wire he deduced that the heat produced was proportional to the electrical resistance of the wire multiplied by the square of the current. This relationship is known as Joule's First Law. The SI unit of energy was subsequently named the joule and given the symbol J. The commonly known unit of power, the watt, is equivalent to one joule per second.

It is now known that Joule heating is caused by interactions between the moving particles that form the current (usually, but not always, electrons) and the atomic ions that make up the body of the conductor. Charged particles in an electric circuit are accelerated by an electric field but give up some of their kinetic energy each time they collide with an ion. The increase in the kinetic or vibrational energy of the ions manifests itself as heat and a rise in the temperature of the conductor. Hence energy is transferred from the electrical power supply to the conductor and any materials with which it is in thermal contact.

Joule heating is also referred to as ohmic heating or resistive heating because of its relationship to Ohm's Law. It forms the basis for the myriad of practical applications involving electric heating. However, in applications where heating is an unwanted by-product of current use (eg. load losses in electrical transformers) the diversion of energy is often referred to as resistive losses. The use of high voltages in electric power transmission systems is specifically designed to reduce such losses in cabling by operating with commensurately lower currents. The ring circuits, or ring mains, used in homes are another example, where power is delivered to outlets at lower currents, thus reducing Joule heating in the wires.