User:James MSC/Almera

From Wikipedia, the free encyclopedia

Nissan Almera Manufacturer Nissan Production 1995-2006 Class Small family car Related Nissan Pulsar Nissan Sentra Nissan Bluebird Sylphy Nissan Almera Tino

The Nissan Almera was a small family car built by Nissan from 1995 to 2006. The Almera name was essentially the European export-market name for the Nissan Pulsar / Nissan Sentra / Nissan Bluebird Sylphy.

The Nissan Almera was designed to offer best-in-class equipment and technology and was always considered a very road capable car offering sharp, precise handling, minimal bodyroll and decent tyre grip, especially in the GTi and post 2003 versions.

[edit] N15 (1995–2000)

N15 Production Q4 1995–Q1 2000 Body style(s) 3-door hatchback 4-door saloon 5-door hatchback Engine(s) 1.4 L GA14 I4 1.6 L GA16DE I4 2.0 L CD20 diesel I4 2.0 L SR20DE I4 Wheelbase 2535 mm Length 4120 mm Width 1690 mm Height 1395 mm Curb weight 1035 kg

The first Nissan Almera rolled off the production line late in 1995, as replacement for the Nissan Sunny, a nameplate which had been in use for nearly 30 years. It was mostly identical to the N15 Nissan Pulsar sold in Japan, except with different trim and petrol engine range.

Power came from 1.4 GA14DE and 1.6 GA16DE petrol and 2.0 CD20 diesel engines initially in 1995, but a year into production a 2.0 SR20DE engined GTi was added to the range. The Nissan Almera was ungainly in appearance but beneath its bland exterior lay an excellent chassis which gave perhaps the best ride and handling of any small medium car on sale in Europe. 1.4 and 1.6 models were sold in 3, 4 and 5 door versions, whereas the GTi was 3 door only, differing from the Almera's main competitior, the VW Golf, whose GTi was sold in both 3 and 5 door configurations.

Almost all Almeras sold in the UK were hatchbacks with three or five doors - this was quite different from some other regions such as Ireland, where the saloon version is substantially more commonplace. Specification was good, with all models getting power steering, driver airbag and stereo as standard. As with all Nissans, build quality and reliability were first rate, except perhaps, the timing chain inside the engine. This was a known problem, but was costly to put right. Today you can expect to pay £800 - £1000 at a Nissan dealer. Phase 2 GTi's with low mileage were rather more sought after, and one can expect to pay up to £2500 for a good example.

[edit] Phase 1 (1995-1998)

Flagship models for each engine capacity are as follows:

• 1.4 Si GA14DE
• 1.6 SRi GA16DE
• 2.0 GTi SR20DE (1996 onwards, sold in bodykit and non-bodykit form)

The above all included 'high-spec' bumpers with foglights (Optional on the Si model), alloy wheels from 1996 onwards (Different size and design between Si/SRi 14" and GTi 15"), and rear roof lip spoilers (GTi models sported an integrated brakelight, also spoilers were optional on the Si).

The 2.0 litre GTi had an optional 'aggressive-looking' factory bodykit, with BMW M3-style sideskirts, and front/rear splitters. Non-bodykit models came with a simpler plastic front splitter. The GTi featured uprated suspension, front and rear strut braces and a quicker steering rack.

[edit] Phase 2 (1998-2000)

For the phase 2, the front bumpers were re-designed, front splitters were added on the Si/SRi, and the GTi had all-round bodykit as standard (Although it was optional to not have the bodykit), and now all of the lip spoilers had integrated brakelights. The original telescopic radio aerial was moved from the drivers A-pillar to the rear of the roof and was changed to a "bee-sting" type. On the GTi, the phase 2 headlights and front indicators featured a black surround.

The Bodykit itself was changed to a more subtle, straight design on the GTi, with the addition of vents on the rear splitter. Due to the high 'casualty rate' of Phase 1 splitters, due to the thin and brittle plastic used, Phase 2 bodykits were much sturdier. As such, it is not uncommon to find Phase 1 GTi's with Phase 2 bumpers or no splitter at all.

[edit] Sales and Marketing

The Almera MK1 sold fairly well in the UK, but wasn't quite able to match the sales success of established favourites such as the Ford Escort, Vauxhall Astra or even the Rover 200, Peugeot 306 and Volkswagen Golf. Those who did buy Almeras were generally pleased by its solid build, excellent reliability and good ride and handling. Equipment levels were generous on most models, but safety specification was relatively basic with just one airbag on all models.

[edit] N16 (2000–2006)

N16 Production Q1 2000-November 2006 Body style(s) 3-door hatchback 4-door saloon 5-door hatchback Engine(s) 1.5 L QG15DE I4 1.5 L K9K diesel I4 1.8 L QG18DE I4 2.2 L YD22DDTi diesel I4 Wheelbase 2535 mm Length 4184 mm Width 1706 mm Height 1448 mm Curb weight 1285 kg

Launched early in 2000, the second generation Nissan Almera differed from its predecessor with smooth, curved lines. Some still thought it bland in comparison with its rivals although the Almera was selling strongly worldwide.

The N16 Almera was based on Nissan's global MS-Platform, which was Nissan's first new platform to be developed after the partnership with Renault. The MS Platform was also the base for the new Primera and Almera Tino.

The Almera Hatchback is basically the same as Pulsar Hatchback sold in Australia and New Zealand. The Almera 4-door Sedan is based on the Bluebird Sylphy, but has different front end.

[edit] Critics

The N16 Almera offered great improvements over the previous generation Almera in terms of handling, tyre grip and drive dynamics. The N16 Almera felt much more sure-footed on the road and was exceptionally nimble for a plain family car. Even today the Almera is considered to be one of the best handling small family cars on the market while maintaining its predecessor's hallmarks of solid build quality and high reliability.

While the previous generation Almera was considered spacious for its class, the N16 Almera was lacking in rear passenger legroom due to a shorter than category average 2.53 metres (99.6 in) wheelbase.

[edit] Versions

The second generation Almera could be had as a three- or five-door hatchback or a four-door sedan, with 1.5 and 1.8 Nissan QG engine series petrol engines as well as a 2.2 direct injection turbodiesel (YD22DDT) or common-rail turbodiesel (YD22DDTi).

Almeras can be also equipped with 1.5 common-rail turbodiesel from the Renault Megane II - Nissan had recently ventured with Renault and the Almera's diesel engine was the first instance of Nissans and Renaults sharing mechanicals.

[edit] 2003 facelift

In 2003 the Almera had undergone another update which included a facelift, retuned suspension, new engines and an updated interior.

First, the Almera's Macpherson strut front suspension and multi-link rear suspension (Nissan's name for its double lateral link twist beam suspension) had been retuned. This resulted in a quieter ride and a reduction in the amount of rear bump-through experienced when heavily laden, improving high-speed stability, driving dynamics and making the car more controllable after an emergency maneuver. The new suspension tuning also proved to produce almost no body roll on tight turns. Overall, Nissan said, the Almera had slightly firmer damper settings and marginally stiffer spring ratings; though there had been no loss of ride comfort or increase in noise levels in normal motoring. The suspension revisions had been executed in such a way as to only come into play at the upper edge of the dynamic envelope.

The facelift also included new chrome, projector-style headlights that were set in a titanium-coloured surround with separate lights for main and low beams set behind an enlarged translucent cover. The front bumper now had an integrated engine air intake that ran almost the full width of the car while a honeycomb mesh grille added visual benefits to the frontal image. Some models also got small circular fog lights.

The interior of the facelifted Almera had also been redesigned with better quality materials and a large color or monochrome center screen which controlled all of the car's functions (climate control, CD player and trip computer). Higher trim levels also included Nissan's Bird-eye GPS system.

The facelifted Almera was built in Sunderland, UK, and exported to parts of the Asia-Pacific where they were sold as the Nissan Pulsar. In 2006 the second generation Almera reached its sixth year of production but was still selling strongly world-wide. It was also sold in Mexico in three versions; a 5-door manual 5-speed, a 5-door automatic 3-speed "Comfort" model and a 3-door "Sport" version equipped with side curtain air bags, fog lamps and a 5-speed manual transmission.

[edit] Nissan Almera Classic (Ukraine, Russia, and the Americas)

The Renault Samsung SM3 is currently sold in Ukraine, Russia, and some countries of North and Central America as Nissan Almera Classic.

The car was a N16 Nissan Sentra-derived model built in South Korea by Renault Samsung Motors. It had four versions and two engines available: the 1.5 litre QG15DE and the 1.6 litre with CVTC system QG16DE petrol; both from Nissan.

[edit] End of production and replacement

The Almera finished production in November 2006, creating a large gap in the range while the Tiida replaces it. So far in western Europe, the Tiida has been launched in Ireland in May 2007, and is due in Britain during 2008 as the Versa. The Tiida disappointed Nissan followers as the Pulsar/Almera had more features as well as a more attractive appearance.

[edit] See also

• Nissan Pulsar
• Nissan Sentra
• Nissan Sunny
• Nissan Almera Tino
• Nissan
• Nissan Motor Manufacturing (UK) Ltd

[edit] External links

• Nissan UK

[edit] References