Template:Infobox Fieldbus protocol/doc
From Wikipedia, the free encyclopedia
An Infobox Fieldbus protocol may be used to summarise information about a fieldbus protocol.
[edit] Usage
The infobox may be added by pasting the template as shown below into an article. None of the parameters are forced, but at least the name should be provided. For an example, see Foundation Fieldbus H1.
{{Infobox Fieldbus protocol
|Name =
|Type_of_Network =
|Physical_Media =
|Network_Topology =
|Maximum_Devices =
|Maximum_Distance =
|Maximum_Speed =
|Device_Addressing =
|Governing_Body =
|URL =
}}
[edit] Parameters
| Name | Name of the fieldbus protocol |
| Type_of_Network | Type of fieldbus network like Process Control, Device Bus, etc |
| Physical_Media | Physical hardware over which communication happens |
| Network_Topology | Type of network topologies supported like Star, Bus, Ring, etc |
| Maximum_Devices | Maximum number of devices supported on the bus at the same time |
| Maximum_Distance | Maximum allowable distance for the communication bus |
| Maximum_Speed | Maximum speed at which communication can occur |
| Device_Addressing | Type of device addressing used: Automatic, DIP Switch, etc |
| Governing_Body | Name of organization or person who developed or is controlling the protocol |
| URL | The official website for the protocol or Governing Body |
| * Only used if the {{{image}}} parameter used. | |
