Talk:Infinite impulse response

From Wikipedia, the free encyclopedia

Could an explanation of the term "pole" as used in the context of IIR be added to Wilkipedia? Existing definitions of pole don't help.

Is this for real? Mark Richards 22:18, 1 Apr 2004 (UTC)

Sure. Why are you in doubt? -- Pjacobi 16:47, 5 Aug 2004 (UTC)

Contents

[edit] dropping the "Truncated IIR filter" section

I've deleted the Truncated IIR filter section. The author had confused the concept of the infinitely long output of IIR filters with some concern that the filter representation itself was somehow infinite and thus needed to be clipped. To which I say:

filter[0] = 10; for (tt=1; tt>0; tt++) { filter[tt] = 0.5 * filter[tt-1]};

There, that wasn't so bad was it? Fits on one line.

To confuse matters, google does show there is an obscure filter somebody has wickedly (or cleverly) called a "Truncated IIR filter", but it actually is an FIR filter. If someone wants to write a separate wikipedia article on that filter (along with the text explaining why it isn't really an IIR filter, and what purpose the filter serves, etc.) that would of course be great & we could add a "See Also" link to it, but it doesn't merit its own section in the main IIR article. technopilgrim 21:47, 13 Apr 2005 (UTC)

[edit] context?

stumbled across this article by accident and found it very hard to find out what it is about. could someone mention some type of context at the beginning? (as in "a filter used in electronics" or so.) --Helge.at 09:34, 15 September 2005 (UTC)

  • FIR is a finer point of digital signal processing. Therefore, a general introduction, like it is used in electronics, should stay in the DSP page. Never the less, I tried to clarify the introduction. Faust o 12:56, 5 March 2006 (UTC)

[edit] For recording engineers...

Its kinda hard to understand when you dont know about electronics. I wanted to find out about FIR and IIR to understand the "actual" difference between "normal" and linear phase EQ; and I’m lost. How about FIR and IIS for non-scientific recording engineers :)

[edit] IIR and analogue?

In the introduction: "The simplest analog IIR filter is an RC filter made up of a single resistor (R) feeding into a node shared with a single capacitor (C). This filter has an exponential impulse response characterized by an RC time constant."

All textbooks I know only consider digital filters and not analogue filters in their definition of an "Infinite Impulse Response Filter". Im not suggesting analogue filters do not have an infinite impulse response. All analogue filters have an infinite impulse response. Rather I'm suggesting analogue filters are not Infinite Impulse Response (IIR) Filters, as this term to my knowledge usally descibes a digital filter.

Of couse the reason I'm writing this is to provoke discussion, so please comment.

There is nothing wrong with calling analogue filters IIR, as they are indeed IIR. (Actually, FIR analogue filters exist; they may be implemented using tapped delay lines - they are discrete-time, but analogue nonetheless.) Oli Filth 08:27, 12 December 2006 (UTC)

[edit] "IIR" is not the same as "recursive"

The article suggests that recursive digital filters are inherently IIR; this is not the case. "Recursive" is an implementation, which produces poles in the frequency response, and usually (but not always) results in IIR behaviour.

A simple counterexample is the following recursive difference equation:

\ y[n] = y[n-1] + x[n] - x[n-2]

which can be easily transformed to become:

\ y[n] = x[n] + x[n-1]

which is clearly FIR in behaviour.

The article should be updated to reflect this. What's more, recursive filter should not redirect here; a separate article will need to be created. Oli Filth 08:16, 12 December 2006 (UTC)

I have now converted the recursive filter redirect into a stub article. Oli Filth 20:05, 25 December 2006 (UTC)

[edit] where is the block diagram?

seems to be missing! Openlander 00:52, 25 January 2007 (UTC)