HP-35

From Wikipedia, the free encyclopedia

This article is about the first HP pocket calculator. For calculator introduced in 2007, see HP 35s.

An HP-35 calculator

The HP-35 was Hewlett-Packard's first pocket calculator and the world's first scientific pocket calculator (a calculator with trigonometric and exponential functions). Like some of HP's desktop calculators it used reverse Polish notation. Introduced at US$395^[1], the HP-35 was available from 1972 to 1975.

Market studies at the time had shown no market for pocket sized calculators. However, HP co-founder Bill Hewlett began development of a "shirt-pocket sized HP-9100", and it turned out that the marketing studies were wrong. In the first months orders were exceeding HP's expectations as to the entire market size. Before the HP-35, the only practical portable devices for performing trigonometric and exponential functions were slide rules. Existing pocket calculators at the time were only four-function, i.e., they could only do addition, subtraction, multiplication, and division. It had been originally known simply as "The Calculator", but Hewlett suggested that it be called the HP-35 because it had 35 keys.

On July 12, 2007, HP announced the release of the "retro" HP 35s in commemoration of the original HP-35 ^[2].

1 Description
2 Descendants
3 Calculator trivia
4 Notes
5 External links

[edit] Description

HP-35 mainboard

The calculator used a traditional floating decimal display for numbers that could be displayed in that format, but automatically switched to scientific notation for other numbers. The fifteen digit LED display was capable of displaying a 10 digit mantissa plus its sign and a decimal point and a two digit exponent plus its sign. The display was unique in that the multiplexing was designed to illuminate a single LED segment at a time, rather than a single LED digit, because HP research had shown that this method was perceived by the human eye as brighter for equivalent power.

The calculator used three "AA"-sized NiCd batteries assembled into a removable proprietary battery pack. Replacement battery packs are no longer available, leaving existing HP-35s to rely on AC power, or their users to rebuild the battery packs themselves using available cells. An external battery charger was available and the calculator could also run from the charger, with or without batteries installed.

Internally, the calculator was organized around a serial (one-bit) processor chipset processing 56-bit floating-point numbers, representing 14-digit BCD numbers.

[edit] Descendants

The HP-35 was the start of a family of related calculators which all shared similar mechanical packaging:

The HP-45 added many more features, including the ability to control the output format (rather than the purely automatic format of the HP-35). It also contained an undocumented timer feature. The timer worked, but was not accurate enough to use as a stopwatch due to lack of a crystal oscillator.
The HP-65 added programmability, with program storage on magnetic cards.
The HP-55, a less expensive follow-on to the HP-65, provided storage for smaller programs, but didn't provide any external storage. The timer that was already present on the HP-45 was now crystal-controlled to achieve the needed accuracy and explicitly documented.
The HP-67 expanded on the programmability of the HP-65, and added fully merged keycodes
The HP-80 and cheaper HP-70 provided financial, rather than scientific functions, such as future value and net present value.

Follow-on calculators used varying mechanical packaging but most were operationally similar. The HP-25 was a smaller, cheaper model of a programmable scientific calculator without magnetic card reader, with features much like the HP-65. The HP-41C was a major advancement in programmability and offered CMOS memory so that programs were not lost when the calculator was switched off. It was the first calculator to offer alphanumeric capabilities for both the display and the keyboard. Four external ports below the display area allowed memory expansion (RAM modules), loading of additional programs (ROM modules) and interfacing a wide variety of peripherals including HP-IL ("HP Interface Loop"), a scaled-down version of the HPIB/GPIB/IEEE-488 instrument bus. The later HP-28C and HP-28S added much more memory and a substantially different, more powerful programming metaphor.

[edit] Calculator trivia

An HP-35 calculator

The HP-35 was exactly 5.8 inches long and 3.2 inches wide. This was the size of William Hewlett's pocket, hence "pocket calculator".
The LED display power requirement was responsible for the HP-35's short battery life between charges — about three hours. To extend operating time and avoid wearing out the on/off slide switch, users would press the decimal point key to force the display to illuminate just a single LED junction.
The HP-35 calculated arithmetic, logarithmic, and trigonomic functions but the complete implementation used only 767 carefully chosen instructions (7670 bits). It is a marvel of concise programming.
Introduction of the HP-35 and similarly capable scientific calculators by Texas Instruments soon thereafter signaled the demise of the slide rule as a status symbol among science and engineering students. Slide rule holsters began to rapidly give way to "electronic slide rule" holsters, and colleges began to drop slide rule classes from their curricula.
100,000 HP-35 calculators were sold in the first year, and over 300,000 by the time it was discontinued in 1975 - 3 and a half years after its introduction. ^[3]